开云体育

Hi, Is there any programming required in Simpl Windows, should a keyboard or mouse be connected to the DGE1 with V12 panel? Also, is the VPG Glass Extender required in Simpl when using the V12 panel

Mark, it will work with the CNRFGWA-418. Ted

Good one, forgot about that. I have not had to mess with that setting in a while. There is other info really needed also. What DM firmare. Are you on your own network or the clients? What else is on

Thanks, but no go.

One thing to try, if you have not already, is to turn off auto negotiate in the Ethernet settings. Doesn't matter much which speed/duplex setting you use but it should be consistent. Tray Sent from my

Marc, As a last ditch effort, you might want to try charging the battery WITHOUT turning the panel on. Let it charge over night. Remove the power supply, and power up the panel on battery only. You

So i bought a URC MX980 and was thinking since the STRFGWX is 418mhz it would work as the receiver. Am i wrong? I cant drop it in on the symbol... WTH? and i have another gateway but yep it is a

Has anyone else experience weird network connection problems between Crestron equipment with recent updates? I have had DM Router issues, where it will show the DM Router as being offline until I

Ok, I tried it on a new PC and it shows the new design, but on the PC's which have already run the older design it doesn't update, so I guess this is an IE cache problem rather than Crestron - never

Tried that, both with the IE options and CCleaner to clear everything - still showing old design :o(

Clear the temp files from your browser. That's all I can think of right now... Tray Sent from my Samsung Galaxy Note?, an AT&T LTE smartphonerlf79cm <rlf79cm@...> wrote: I've updated my

I've updated my xPanel but whenever I compile and run it through the browser it's showing the old version - I've tried renaming, running it from the PC, processor, etc - always showing the old

Hi all Can anyone please help?? with an issue on the Naim NS02 server module (just uploaded this to the files section) This module was working fine until the latest Crestron and device database

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Crestron group. File : /Modules/Naim audio server module.zip Uploaded by :

yes, u tried but nothing happened still disconnected plzzzz help

You are correct that the module I am referencing is the 'Tandberg MXP Processor v1 (cm)'. Tried increasing the buffer size a few times, and still would not fix it. In the case of the Tandberg making

I am having some trouble using the volume feedback from this receiver to drive a analog gauge. With other devices, I use a lookup table in the serial i/o to drive an analog initialize, and an analog

Sorry I missed your reply, been away for a few days, thanks very much for the info, will wire it up and give it a go!! P

A couple of obvious things... 1) Make sure you're using one of the HDMI outputs on the Oppo, not the input. 2) Try both HDMI outputs on the Oppo - HDMI 2 has a less complex signal path and thus

Can anyone please help. I have a Newly Installed Oppo BDP-103 installed behind a HD-MD8x1 and I cant get it to provide a signal via the HDMI. Any suggestions... what am I doing wrong...