开云体育

I think it's because they're not core3 projects. I've seen this recently since using vt 5.x where it adds the core 3 level line into the project info. -Neil Dorin

reloading the firmware fixed it - thanks mark

I'm supporting a project remotely and the client mentioned that after loading the .VTZs in Toolbox it shows "Project Info Incomplete" I'm not sure if this is "new" or I've just never noticed it with

Has anyone imported a pil file into VT-Pro? http://www.crestron.com/downloads/example_programs/172/simpl_windows_dynamic_presets_demo_v1.0.0.zip

Can you reload the firmware? Sounds like it might have gone a little stupid. -- Lincoln King-Cliby, CTS Sr. Systems Architect | Crestron Certified Programmer (Silver) ControlWorks Consulting, LLC V:

it is not that events that are scheduled at the same time won't work, it is the logic those events are driving that may not work at the same time. if I am understanding the thread right. as I ran into

network device tree - says 'loader...' @cresnet 2A it is definitely having trouble trying to initialize tried all the press & hold buttons on front, but nothing changes mark

I'm also working on a project with this module, my client already complained that some scheduled event did not happen, I believe that events scheduled at the same time does not work

can't get past the CN... checked cresnet - OK it was working until i unplugged it - was going to enable the external sensor, but can't get that far mark

What do you have the "Main Scn Lower Object" configured as? It will give you an error of some kind (it's been so long I can't remember what) if you have it set to display something that it doesn't

i did check the voltages & i have 24VAC from the furnace and Cresnet is 24VDC mark

i unplugged my thermostat to install a remote sensor and when i plugged it back in i get CN in the bottom left corner followed by a blinking square anyone know what this means? have disconnected the

Good point, but nothing has been added above the Scheduler. It sits at the top of all logic. I am currently running the program on my own system, so will be able to see what exactly happens. At this

I've been working on this off/on for some time now, maybe I should dust that off just a word of warning...don't directly connect your sprinkler valves to the ST-IO, all it takes is a single lighting

I think I got to hear variation of stairway to freebird at the shop I worked at. ! From: Crestron@... [mailto:Crestron@...] On Behalf Of Paul Cunningham Sent: Friday, April 06,

Or "smells like teen spirit" in the "my momma's buying me my first guitar and I don't need lessons because I'm going to be in a super-famous band now" room

Couldn't he just put the bus bar back on that load in the terminal block as well? Instead of having to rewire it. ....If you're not looking for a programming solution.

Thank you guys. But wait, I'm confused... You're talking about FileRead and FileWrite, but if I'm using structures I can't use those functions, only ReadStructure/WriteStructure, correct? Also, all

Or Stairway to Heaven in the acoustic guitar room.

Clearly that suffering well prepared you for your current career....:)