De : Anhtu Vu via groups.io <anhtu.vu@...>
Envoyé : vendredi 7 février 2025 15:24
? : [email protected] <[email protected]>
Objet : Re: [crestron] what's the easiest way to create a simple vertical and horizontal divider

---

De : Brian via groups.io <brian.williams@...>
Envoyé : vendredi 7 février 2025 15:16
? : [email protected] <[email protected]>
Objet : Re: [crestron] what's the easiest way to create a simple vertical and horizontal divider

>Images>Image Object - then, in the Property Box (with the object selected), >Image Style>108-Vertical Line (or Horizontal Line) in the drop down menu

Hi there,

?

I'm trying to create a simple thin line to visually divide (horizontal et vertical) buttons on my TSW-770 Panel.?

?

I'm using the Border object, is there a simpler, more elegant way to do this ?

?

Thx,

?

?

?

?

Yeah same shit, different name...

Yes, initially I thought that was the issue - bucause I save a DIN-AP3 as a DIN-AP4.

?

So redid it from scratch and it still was not working.

?

I THINK (not confirmed because it "just started working after reboot") that it was because I completed the incomplete bacnet objects with ctrl+I

?

When I did that it just entered 0d as the object number for 100+ objects

?

I commented them all out, and I suspect that is what might have been the issue.

Hi Dears,

?

Anyone Has Lutron Graphics eye IR File to help me with?. I am doing upgrade for an old system and requires IR File.

?

Thanks

I have tried to mess around with it from time to time. Just a bunch of bugs still and missing support for several SG items. Most notably a Media Player. Without that its useless to me.?

I still use Crestron App in VTPro and in my Simpl programs and dont have any issues. Just havent gotten around to changing it on the Simpl side.?

I haven't used Construct and never will, it's like Studio to me. Whoever used it never said one good thing about it so it is a disaster.?

Crestron went totally backwards on introducing CH5 to us, especially with the whole Angular template and such.?

Good morning Hive mind!

?

I have an existing NVX installation running now on 4 mismatched Cisco switches, that is out of capacity.? We are expanding the system and as such we have stood up a Netgear AV network with a M4350 10G at the core and M4250s at each IDF.? The Core M4350 will be handling DHCP duties.? Here's my question:? Currently the CP3N is handling DHCP, which has its scope.? My plan is to connect the Director to the new network so it has an IP address assigned from there, and then move all the existing endpoints over to the new network.? Am I missing anything with this?? My assumption is that the Director will still see the devices, and retain control.? The only outlier I can think of is potentially changing the IP address of the director in the SIMPL program.? If I am not clear at any of this let me know, does this sound right?

Hello,

? ? I want to thank everyone for their comments & assistance. I reached out to an AI website & with a lot of errors on its part and lots of reexplaining exactly what I wanted the code to, I have a working Simpl+ module for my ViewSonic PRO-8100 which does the following:

?

1) displays the lamp hours,

2) shows me warming up & cooling off messages,

3) does a poll for the lamp hours every 5 minutes.

?

Again, thanks to everyone for their help.

?

dsmith

Are you loading to the same type of processor as defined in SIMPL? BACnet slots change between processor models so a program with an RMC4 defined won't run BACnet on a CP4.

Crestron App is what to use for Crestron GO in VTP

?

In SIMPL define it at Crestron GO

?

They never updated the nomenclature in VTP

What would cause the error "bacnet stack not runnig" on a 4 series?

It has a license activated

I am just trying to HOST a handful of points.

Hi All,

?

Excuse the dumb question, but....

?

The last time I programmed an iPhone interface was back in 2019.

?

I have one to do on a project and just opened the program to add it in, and I am not sure what versions to use!

?

I am assuming that Crestron Go is the latest App (?), and I should therefore use that symbol in Simpl, but what panel type should I choose in VTPro-e? Since Go is not on the list, I assume it is one of the other options, but which one?

?

The whole Construct WYSIWYG concept is a complete disaster.? You aren't alone.

Greetings All,

?

Did anyone managed to configure UPS APC? with Crestron 4 Series Using SNMP to monitor the device.? Appreciate your helps. Thanks