Keyboard Shortcuts
Likes
- Crestron
- Messages
Search
|
C# Pro Door lock
#programming
#simplsharppro
Does anyone have an example of Home-Connect-DL door lock??
I can't seem to find any info on it. Thanks |
|
Re: xio cloud deployment steps
I don't feel they did a great job of actually documenting this.
For #2 you are correct, the client needs to create an account then add you as a "Support Provider" under the Settings -> Support Providers tab. You would need to provide them the XIO account number for your companies account that you get by following the XIO cloud link on the crestron home page. I believe this account is auto created for your company. For #1 I would go through the same process to have them create the account then let their trial run out. |
|
xio cloud deployment steps
I have take all the XiO Cloud courses but have never gone through a formal deployment. I am not clear on the best practice of deploying via XiO Cloud in the following two conditions.
1. Client does no wish to pay for XiO Cloud service but I see benefit of utilizing for quick deployment. Do I simply create a trial version of XiO Cloud, create the rooms, add devices and deploy, and simply let the 60 day trial run up?? 2. If client does wish to pay for service, are they simply adding me (as the programmer etc) to the users of their own person XiO Cloud account (once created after license purchase), which then gives me access to configure the rooms and add as needed? |
|
Re: Construct and XPanels
I to am dipping my toes into Construct this week. I was sent a test TST-1080 for evaluation and wanted to build out something in Construct before I felt comfortable deploying projects in the wild. I have also had this issue with trying to run an "XPANEL" on my test RMC3 and also my VC4 server. I have been struggling to find any documentation of how to implement ch5z "Xpanels" on processors as well. I am following this topic and hopefully someone with a little more Construct know how hops in.
|
|
Re: RS-232 codes, macros and Bridge problems with Clipsal control
How you make the first initialization works?
For me I need always to use C-Bus Diagnostic Utility, connect the?c-bus PC5500 and control it there, Once I can control it, I remove the cable connected to my PC and put back the serial from my Crestron processor and its works. but when the unit was powered off, I need to do again this procedure. Is there a string command I need to send for the first initialization?? |
|
Re: How to use a button with the sensor input on TPMC-4SMD
¿ªÔÆÌåÓýIf it¡¯s like the TSW-730/732 it shows up on a device extender (but I¡¯m not opening SIMPL right now to say which one ;) ) ¨C note that the switch short is from 24 to the input, not the input to ground. ? I have 40 TSW-732s using a switch in a mic holder to automatically mute/unmute microphones when they are removed/replaced¡ 10 years later still works well (and a bit of a shame next year when they get replaced with 1070s that I¡¯m going to have to bury a bunch of GLS-SIMs to maintain the same feature¡) ? -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D ? From: [email protected] [mailto:[email protected]]
On Behalf Of ckangis
Sent: Tuesday, February 06, 2024 10:10 PM To: [email protected] Subject: Re: [crestron] How to use a button with the sensor input on TPMC-4SMD ? The webpage indicates that it has 2 Occ. sensor inputs. looking in SMW I don't see any triggers into the program (maybe I missed it??) |
|
Re: How to use a button with the sensor input on TPMC-4SMD
The webpage indicates that it has 2 Occ. sensor inputs. looking in SMW I don't see any triggers into the program (maybe I missed it??)
It may be something dedicated to some built-in app function... I never used it as I thought it was a little too light-duty for most projects... |
|
Re: TSR-310 impressions
A NEW CHALLENGER APPEARS!
toggle quoted message
Show quoted text
On Tue, Feb 6, 2024 at 11:15 AM, MSTC wrote:
?
|
Gregory Oldacre