开云体育

Crestron and Sonos must be on the same network.
Simply won't work if they are not.

开云体育

Not only green (like the -E variants) but IMO a particular obnoxious shade of green

Hey guys,

Our customer has a simple sounding request but never having worked with Sonos before I am not sure how to accomplish this.

All they want to do is mute all Sonos players if they get an alarm in.

I have added a Sonos Device Module v3.2.0 for each Sonos.? All have the default parameters except for the player name.

On the module inputs I have only Restart and MutePlayer connected.? Every other connection is commented out.? On the outputs I have Offline connected for debugging.

What makes this extra fun is the Crestron traffic and Sonos traffic are on different VLans, but our IT group can take care of that if necessary.

If I run the code I get:

? 1. Notice: SimplPlus[App01] # 2023-10-14 04:02:55 # CRPCConnectionHelper - Created CIP Transport for ipaddress: 192.168.69.70, port: 41798, adapterID: 0
? 2. Notice: SimplPlus[App01] # 2023-10-14 04:02:55 # Sonos - Multicast discovery started.
? 3. Notice: SimplPlus[App01] # 2023-10-14 04:02:55 # Sonos - The system state changed to "Connecting to Primary Device".
? 4. Notice: SimplPlus[App01] # 2023-10-14 04:03:25 # Sonos - Discovery state changed to idle.
? 5. Notice: SimplPlus[App01] # 2023-10-14 04:03:25 # Sonos - Multicast discovery result: no devices found.
? 6. Notice: SimplPlus[App01] # 2023-10-14 04:03:25 # Sonos - The system connection failure reason changed to "No Devices Found".
? 7. Notice: SimplPlus[App01] # 2023-10-14 04:03:25 # Sonos - Discovery mode changed to "broadcast".
? 8. Notice: SimplPlus[App01] # 2023-10-14 04:03:25 # Sonos - Broadcast discovery started.

In the error log.? This sounds like VLan issue.

I guess my question is am I doing this correctly, or do I need a full CRPC type connection to get this to work?? Is there an easier way?

Do I need to Restart every device or is one enough?

Thanks

Came home with a S95C last night and unboxed it.? I miss the days when you actually got a manual with these.? Considering how thin it is, was expecting it to be lighter.? It's a heavy hunk of? a TV, I'll give it that.? I'm planing to reuse the existing wall mount from the curved screen I'll be taking down but expecting to have to space it out to make room for the interface.? I'm not sure how good of a test subject I'll be for the Ex-link.? I'm only using on/off and only enough to access smart controls from a TP.? Not even using the TV's audio.? Source switching and audio is handled by the Integra AVR in the rack.? FYI, I'm still on a Pro2 at home.? If it ain't broke don't fix it.? I am kinda pissed that I lost the weather a while back but that's just a tap on a smartphone away.

Hi Adam,

Not got one yet, however just took delivery of 4 Stream Boxes for home so replacing Sky Q boxes and planning to play towards the end of next week.? ?Will see if current IR works and if not see if I can learn the codes.

Steve

Thanks, got it working. I am guessing Construct doesn't stretch, looks like I have to make projects for every resolution available... Ufff
And I still need to figure out the license too.?
Thanks for the help

Also pretty sure Prodigy keypads are green

Thank you guys!

Hi

Has anyone got an ir file for the new Sky Stream?? My trust learner has stopped working and I need to control one via IR until Ultamation creates an IP version if that is even possible!!

Many thanks

I have P-SWEX, P-DIMEX, and P-CBDEX; all are green.

I'm 90+% sure that they were the green LEDs.
Crestron at/after this started selling the -E (express) and -P (Pro) versions with Green and White LEDs respectively.
The -P were more expensive, so my assumption/memory is that the prodigy was the green ones, since is was an 'entry level' package...

Tony, also do you know how many simultaneous streams that will allow?

Tony, how quick do the panels lock on the stream from that device?
Today I have been working on a RTSP server that will re-encode many streams to whatever I want. I am trying to find a setting that the panels will sync on very fast. So far the fastest is using MJPG, but the steamer I am working with doesn't want to encoder to that.

It's very inconsistent. At some sites it works great, but others not so much. For troublesome projects, I've resorted to specifying a separate video encoder connected to the NVR, so the touchpanels only have to deal with a single stream or jpeg. It also allows the security installer to do whatever they want with the NVR and camera settings, without any special considerations for the Crestron panels and apps.

Although some NVR and camera brands are worse than others, I don't know of any I'd consider fool-proof, so a separate encoder greatly simplifies things and increases the likelihood of success. There are lots of similar encoders available, but I've used this one the most - .

Dealers and salespeople are often stubborn and don't want to add another "box" (that wasn't their idea) to the system, even at such a ridiculously low price, so I usually include the following statement:

"Camera Integration only includes X amount of time to troubleshoot streaming issues. Additional troubleshooting and experimentation time will be billable". That typically prompts them to do things the easy way... :-)

Does anyone know if the light indicator for the Prodigy keypads and dimmers is white like EX-P models or green like the EX-E models? Mostly looking at the P-CBDEX-W-S but would be nice to know about the dimmers too. Thank you in advance.

On Fri, Oct 13, 2023 at 10:44 AM, D_a_n_e wrote:

hydrogenmanager is enabled, but also hydrogenenable is set to OFF

ENABLEFEATURE HYDROGENMANAGER ON/OFF is what enables/disables the XiO Cloud services in SSP/C# Prog0.
The XiO commands (HYDROGENENABLE, HYDROGENSTATUS, HYDROGENURL, etc.) aren't registered/recognized until the service is enabled.

The same goes for ENABLEFEATURE CLOUDCLIENT ON/OFF and Fusion Cloud / MyCrestron Residential Monitoring cmds like MYCRESTRONACTIVATION.
The same goes for ENABLEFEATURE SNMPCOMMANDPROCESSOR ON/OFF and SNMP cmds like SNMPMANAGER, SNMPACCESS, SNMPMONITOR.

If you don't plan to use the XiO service at all, using ENABLEFEATURE HYDROGENMANAGER OFF is the most thorough.
That's what's sent behind the scenes when using the checkboxes in "Functions > Device Info > Cloud Services" tab.

Interesting! The HyrdogenManager command is a separate command I think only shown in the 3-series 'EnableFeature'...
Dane, How did you get that table to show?

On Thu, Oct 12, 2023 at 07:51 PM, Eric Luckart wrote:

The only issue I have had with ex link, is one way serial on 3 series processors.

FTR, My problem experience was using a DM RMC serial port (2-way) vs. a processor port. This site in question has all older Sammy's controlled with the same port without issue.
I've also used the 1-way control via IR ports in the past without issue...

Stefuel2, Please keep us posted about your experience as I would love to know that EX-link is reliable again!!

I'm guessing that hydrogenenable and hydrogenmanager are two different things