Keyboard Shortcuts
Likes
- Crestron
- Messages
Search
|
Re: Bosch DCNM Dicentis
#crestron
I already found this Crestron module on Upwork and it is working great.?
|
|
Re: Apple TV Select Button
On Fri, Sep 29, 2023 at 11:04 PM, CO Cowboy wrote:
When sending IR out of the Endpoint, it was sending commands for about 2 sec.Interesting, I had a project recently that used an 8x8 that we updated to the latest FW. We had an LG TV. I started out using the LX series driver from the CresDB, which I've used a number of times before with no issues... Since this TV needed VOL+/- and Mute toggle, We immediately saw that triggers, even button pulses on the HRs and from DBug) would always drive the IR for 2sec. No issue directly on the CP3 IR ports, only the RMC-100-C. Other Drivers (Samsung, Sony) had no issue, so it was something specific to the LG driver AND the RMC...Weird!!! FTR, this isn't the issue with the Apple TV, which has worked on many systems correctly and just started exhibiting this behavior... |
|
Re: Apple TV Select Button
Well, I didn't have THAT issue...
However, Earlier this week we added a new ATV to an older DM32x32 system. When sending IR out of the Endpoint, it was sending commands for about 2 sec. I really didn't want to Update the firmware, as it's getting Fragile as it is. I changed the CrestronDB AppleTV (4gen) file by selecting all commands and Converting them to "Pulse Only" (and saving as my own). and it's working like a charm now. |
|
Re: SONY SRG X400 camera control
toggle quoted message
Show quoted text
|
|
Re: SONY SRG X400 camera control
开云体育in visca serial entry in the SRGX module you need to send: Preset1: \x8x\01\04\3F\02\00\FF Preset2: \x8x\01\04\3F\02\01\FF Preset3: \x8x\01\04\3F\02\02\FF
Le 29/09/2023 à 20:44, Audvizer a
écrit?:
|
|
Re: SONY SRG X400 camera control
开云体育Yes SGRX you can send direct command in
the visca input, work great ! Le 29/09/2023 à 20:33, Audvizer a
écrit?:
|
|
Re: SONY SRG X400 camera control
开云体育I do and SRG-A last week and there is a
switch on the camera for UDP control Le 29/09/2023 à 20:17, Audvizer a
écrit?:
|
|
Re: SONY SRG X400 camera control
toggle quoted message
Show quoted text
|
|
Re: Commissioning a DM-NVX-DIR-ENT - can I edit the Device Map XML file manually
I was thinking I might just add in a few fake boxes to make these gaps, though I assume it would whine about that since they would be missing.
Last night, I adopted 4 units into Director as a test 2x2 matrix.? Routing worked ok, but I wasn't getting any control - that's when I realized that Director's non-knowledge of VC-4 RoomID extended down to the end points. I knew that Director wasn't RoomID aware, so had already linked Director's entry in the VC-4 unassociated devices section. I guess I had always assumed that all comms to the endpoints ran through Director. Clearly not true, since now that Director has some endpoint loaded up and there are corresponding items in the SIMPL program Director tree - Director pushes its Control System IP address to each endpoint along with a 4 digit IPID... but no RoomID so I now have 4 unallocated devices on VC-4.? ? That totally blows since that means that I would need to manually set 300 some endpoints with RoomIDs or do the same in Unassociated devices. I Powershelled all the IPIDs for the other hardware, but best I can tell there's no easy way to just add in a RoomID to an existing IP table entry without deleting that entry and ADDMing in the whole entry from scratch. I'm sure someone could script that to pull the old info and rebuild with the RoomID, but I probably couldn't quicker than just sucking it up and doing it by hand. |
CO Cowboy
Doug G