¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
Date

Re: Send Email: Series 3: How in holy Hell?!?!

 

¿ªÔÆÌåÓý

Hi Mike,

Couple of questions.?

1) What 3-Series processor are you using?

2) Did you follow ALL the directions in the module help file including going to , creating an account, creating your own token, including that token as a parameter to the PushOver v1.0 module, registering the PushOver smart phone app, and finally including the user ID as a paramter to the PushOver Event v1.1 module so the PushOver message will be properly routed?

3) If Yes to number 2 are you sure you fully copied the token and pasted all of it into the parameter field of the module?? Or, did you accidentally use the Token in the Event module and the User ID in the PushOver v1.0 module?

There are lots of people using this (including myself) and nobody is reporting this kind of problem.

Thanks

Jay

On 7/30/2023 1:37 PM, mikecm@... wrote:

Hi Jay, I'm testing this on my home system for notifications and getting an invalid token error. I'm using the token generated by the Pushover site for my account so I'm not sure why the error or where to start troubleshooting. Any ideas? The response from debugger is:
PushOver - Send_Notification - httpsResponse = {"token":"invalid":"errors":["application token is invalid, see "],status":0,"request":"allkindsofnumbersandlettershere"}

-Mike


Re: Send Email: Series 3: How in holy Hell?!?!

 

Hi Jay, I'm testing this on my home system for notifications and getting an invalid token error. I'm using the token generated by the Pushover site for my account so I'm not sure why the error or where to start troubleshooting. Any ideas? The response from debugger is:
PushOver - Send_Notification - httpsResponse = {"token":"invalid":"errors":["application token is invalid, see https://pushover.net/api"],status":0,"request":"allkindsofnumbersandlettershere"}

-Mike


Re: CRESTRON CONSTRUCT first impressions

 

¿ªÔÆÌåÓý

Yep, sales is super excited about the new wireless hotness but they don¡¯t have to try to program it

?

From: <[email protected]> on behalf of XSDS <xsdesignstudios@...>
Reply-To: <[email protected]>
Date: Wednesday, July 26, 2023 at 6:04 PM
To: <[email protected]>
Subject: Re: [crestron] CRESTRON CONSTRUCT first impressions

?

TBH, we arent even messing around with Construct until there is a viable port over from our current package of interface options.? There needs to be a way to crossover for clients with older systems and clients with new requests.? This whole releasing of panels not capable of running VTPro projects just reeks.


Re: Pearl 2 Epiphan RS232 Control

 

Hi Nico, Thanks,
But those modules is only for TCP/IP what i can see.
My Epiphan and CP4 is on different networks, thats why i need to use Serial.
Lars


Re: Pearl 2 Epiphan RS232 Control

 

¿ªÔÆÌåÓý

There are module examples in crestron application market for Epiphan.


You can use the base example for your project
Nico


NFH

On 29 Jul 2023, at 5:15, Lars ?slund <lasse@...> wrote:

?Hi, is there anyone made som emodules for Epiphan units for Serial Control?
I know there is published command online,
but if anyone willing to share som prefab stuff im grateful.
/Lars


Pearl 2 Epiphan RS232 Control

 

Hi, is there anyone made som emodules for Epiphan units for Serial Control?
I know there is published command online,
but if anyone willing to share som prefab stuff im grateful.
/Lars


Re: Random: Crestron Go App - Media Player object displaying large scrolling list #app

 

BR 4007 = "CGo - Media Player - Browse Context Options Space/Padding Issues"
BR 4007 was reportedly fixed in latest CGo v1.0.52


Re: Controlling displays in a Just Add Power System

 

To set the baud rate to 9600 8N1 you need to first telnet into the just add power device and the type the following command

astparam s s0_baudrate 9600-8n1


I think you can figure out how to set other baud rates from that.

To get help on a command such as astparam type
astparam --help

You might also want to look at


Now I remember that documentation for Just-Add-Power isn't the greatest.? But you can find most of what you need by looking at all the on line help on their website.


Re: SIP Intercom recommendations

 

I may have a working Vio module pulled from an eholo we updated to 2n recently.... Friendly price, if you want it, dm me.?


Re: Controlling displays in a Just Add Power System

 

I appreciate your reply. I was doing a search on their website and couldn't find the info.? I was searching with "rs-232." When I searched with "rs232",? it gave me the info I needed.? You set the mode in the GUI of the receiver mode2.? This mode makes the connection from the ethernet port straight to the com port of the receiver using port# 6752.? ?You have to set the baud rate of the receiver as well.


Re: Controlling displays in a Just Add Power System

 

I did a video wall with the Color Max MC-RX1/TX1 about a year ago.? I know the baud rate is adjustable.? If I remember correctly, you change the baud rate via a telnet command.

The Color Max was a brand new product when we used it and we had a lot of lock up issues at first.? In particular, it would tend to lock up when you send it a command (whether it be a IR, RS232, or video wall command).? We landed up running IR to the displays from the Crestron processor to help reduce the lock ups.?? But even then, we had occasional lock ups.? Eventually Just Add Power did come up with a firmware update and after that the product was stable.? But I didn't go back and try using RS232.

After the initial issues, I was pretty impressed with the things the Color Max could do.? And absolutely no passwords required (unlike Crestron).? Even can preview the image via the web gui even with HDCP sources. The major down fall however is it does not support 1080i (at least a year ago it didn't).? So for cable boxes? satellite receivers you will have to use 720p.

Tech support was pretty good.

I might note that we used standard multicast instead of their custom manage switch solution.? So we did not use their Crestron module.


Re: Controlling displays in a Just Add Power System

 

It has been a while since I have worked with a JAP system, but I do recall that you do in fact simply use a TCP/IP client with the endpoints address and the port number for whichever operation mode you are using. There is a section in the GUI of the JAP receiver that you can make adjustments for the serial mode as well as the baudrate settings. There are also jumpers on the endpoint for making the serial connection straight or null.


Re: CP3 Ethernet Issues

 

CP3 firmware issue?? You might try downgrading the firmware to a version from a few years ago and see if that make a difference.? I myself haven't seen this issue -- but for Series 3 devices, I use Crestron firmware/software back before the Series 4 came out.? Particularly now that the Series 3 has been discontinued.? I only use the latest and greatest firmware/software for Series 4 devices.

You also might try putting the CP3 on its own subnet and point all the end points to the new IP address -- that would shield the CP3 from other devices flooding the CP3's network port.? I had an issue back a few years ago with Haiku fans flooding the network with packets and messing up my Series 3 devices.? Landed up putting the Haiku fans on there own subnet to fix the issue.


What do others think?Could a bad network connection (RJ45) cause this kind of issue??


Re: Reading Data Stored in a CSV file on a Crestron Processor

 

Hello, Do you have an example for the Simple+?
best regard


Re: Extract CSV - to CP4

 

the json modules of crestron is great for working with files ,after you use it u dont put any more names in vtpro
its in application market:
https://applicationmarket.crestron.com/json-suite-v2-1/

https://applicationmarket.crestron.com/content/Help/Control_Concepts/JSON%20FileProcessor%20v1.0.0%20Help.pdf


Re: SIP Intercom recommendations

 

Go with 2n.? I would steer clear of Holovision.? Just about every one we installed has failed.? I've also done AVLinkpro which is a Linux based SIP server and requires a lot more configuration / customization, but its not native Rava.


Re: SIP Intercom recommendations

 

I found this one on Google.


Re: SIP Intercom recommendations

 

Guys,

Thanks for the recommendations. They both look like they will do the job nicely (at some cost though :) )


Re: Looking for small CBD-P-W-T blank buttons

 

I know I have a few. They are at the office, so I won't know how many until tomorrow.


Looking for small CBD-P-W-T blank buttons

 

Hello,

If anyone has blank CBD-P-W-T buttons (the small one, not the split buttons you can use in the bottom two positions).? ?I am looking for 40.? ?If you have some you would like to part with please let me know.

Thank you
Bryan