Re: CCD Samsung QLED can't connect
got the full model #, picked the correct Samsung CCD driver
dealer wired the set, works now
|
Re: CCD Samsung QLED can't connect
Yeah, there probably are. I updated the repo to have a full package download option, notably it includes a couple of DLLs that it needs. . If that still doesn't work (or if anyone else has any issues), feel free to shoot me an email or a message on GitHub and I'll look into it further.
|
Re: Event Scheduler 2 v1.2.0 issues
Nevermind, gave up and coded a custom one.....
|
Hi,
I have a CP3N with a defective SD card. Could someone help me with an image file. The MAC and SN will be changed directly.
-Sascha
|
Re: NAX with NVX AES67 stream issues
We've had lots of issues too. I'm not quite ready to call it the secret sauce, but it does seem manually setting the NAX port on all NVX devices to 5004 and sending 5004 with every stream switch has made a difference.?
Jonathan
|
Re: CCD Samsung QLED can't connect
Sound like a nice tool.
Can't seem to get CCDInfo.exe to do anything though - neither from Explorer nor the command line. No messages, just does nothing. Are there some dependancies I'd need?
|
Re: CCD Samsung QLED can't connect
I made a small GUI program that parses the information from a CCD and makes it easier to read. It takes either the zip file or the pkg file and shows the most useful pieces of information in a table view instead of just a JSON file. It also displays the JSON, if you wanted to see the rest of the data without going through all the unzipping stuff. For anyone who is interested, it's on GitHub at (there's a "release" just so there's a downloadable executable if you don't want to compile the project).
|
Re: NAX with NVX AES67 stream issues
I've had these problems in the past.? There are always one of two problems, network configuration and streaming port settings.
If you check the "Device is Master PTP Clock Source" and all NAX say yes, then it is a network issue.?
For the port issue, I have manually set the NAX port on all NVX devices to port 5004.? The NAX doesn't like changing ports for some reason.? I have witnessed all zones on a single NAX stop working when any zone changes streams with a different port.? The only way to get audio working again is to clear all stream (enter 0.0.0.0 in stream address) then resend the address.? After manually matching all port values, the problem goes away.
Jay
|
NAX with NVX AES67 stream issues
Am I the only one having loads of trouble (Rx streams stuck on "Connecting") lately? Weh ave lots of NAX jobs where we only have audio from NAX 1 or 2 or even 3, but now we are starting to use the AES67 stream output of NVX cards and having loads of problems.
Crestron Support has come back with loads of things to try that don't help:
-re-send the Port[5004] every time you switch streams
-Stop, change stream, then start stream
-change port 4570 for Video sources and 5004 for Audio sources
-update all your firmware
-use our Crestron (Netgear 4250 switch)
-etc, etc
These amps just seem to get stuck and rebooting amp/s might get things working for a few hours or days. but it stops again. Switching from NAX stream to NAX stream will be fine, but then you switch a NVX AES67 stream and things either stick on connecting or you might get sound, but then when you go back to NAX audio you have no sound. its variable and frustrating.
Anyone found the secret sauce and care to share? Anyone else doing this with Simpl and having success?
Jon
|
Re: CCD Samsung QLED can't connect
Use 7zip to open the archive and open the day in notepad++. Look for the user attributes and follow them. Alternatively you can set the program to load the driver and send the user attributes to serial joins and send them to a msp. Then in toolbox read the strings.
It will tell you per display what needs to be done to connect.
Cheers
toggle quoted message
Show quoted text
On Jun 7, 2023, at 4:25 PM, Steve Adams <steveadams172@...> wrote:
? I believe you have to go into the settings menu and allow 3rd party control to get the pop-up. The protocol is backwards compatible. There might be new things but the old tends to still work. The inputs might not align. Find the driver that has the same set of inputs.
Also keep in mind that the display uses wol for power. Grab the MAC address for the Ethernet port not the wireless amax address and provide that to the correct user attribute string value following the documented format.
Cheers Natalie ?i have asked to have it hardwired
i also notice that he QN90 is not on the list in the CCD driver file
i hope it isn't different than all the other QLEDs
the popup has never appeared
|
Re: CCD Samsung QLED can't connect
I believe you have to go into the settings menu and allow 3rd party control to get the pop-up.
The protocol is backwards compatible. There might be new things but the old tends to still work. The inputs might not align. Find the driver that has the same set of inputs.
Also keep in mind that the display uses wol for power. Grab the MAC address for the Ethernet port not the wireless amax address and provide that to the correct user attribute string value following the documented format.
Cheers Natalie ?i have asked to have it hardwired
i also notice that he QN90 is not on the list in the CCD driver file
i hope it isn't different than all the other QLEDs
the popup has never appeared
|
Re: AAE Speaker Connectors
I know this is old but I wanted to confirm that these worked perfectly. Thanks everyone that chimed in.
Gary,
toggle quoted message
Show quoted text
On March 16, 2023 9:09:09 PM CDT, "Michael Braithwaite via groups.io" <smartamp@...> wrote:
On Ebay;($50) for full AAE set
on mouser; ($5.38) for 10
-Mike
On Thu, Mar 16, 2023 at 8:30?PM Gary Miller < g@...> wrote:
Thanks Tony, I'll report back if these work.
|
Re: CCD Samsung QLED can't connect
The protocol is backwards compatible. There might be new things but the old tends to still work. The inputs might not align. Find the driver that has the same set of inputs.
Also keep in mind that the display uses wol for power. Grab the MAC address for the Ethernet port not the wireless amax address and provide that to the correct user attribute string value following the documented format.
toggle quoted message
Show quoted text
On Jun 7, 2023, at 9:20 AM, mark kaye <markkaye@...> wrote:
?i have asked to have it hardwired
i also notice that he QN90 is not on the list in the CCD driver file
i hope it isn't different than all the other QLEDs
the popup has never appeared
|
Re: DM8x8 - all 5 room boxes have problems?
client tried moving POE cable to another port on the switch - PJ still not working
he is going to run another cat cable to the PJ just to test (it's fairly easy to do) before reterminating all the cat6 cables
|
Re: CCD Samsung QLED can't connect
i have asked to have it hardwired
i also notice that he QN90 is not on the list in the CCD driver file
i hope it isn't different than all the other QLEDs
the popup has never appeared
|
Topics in Home Automation - New Article in Residential Tech Today
My latest article, "How the MeatStick 4X Grilling Thermometer Improves on Its Predecessor¡± is being published by the good folks at Residential Tech Today Magazine on their web site.
After a long winter, summer is the season for BBQ and grilling. Unfortunately, not everyone is an award winning pit master.? The new MeatStick 4X is the next generation in grilling thermometers and can help even amateur outdoor chefs cook great food on their grill, in their smoker, and more.? This article provides a full review of the new MeatStick 4X.
You can find the article here:
For those interested in earlier articles that I've written, you can find those here:
Finally, for those that want to see even more content I've written about smart home technology you can find that here:
Thanks
|
Re: TSW-760 - The server that the application is connecting to is unverified
I know that Amazon have been making various changes.
From the URL it can be seen that this is coming from an https, so don't know if that changed recently.
|
Re: CCD Samsung QLED can't connect
The ccd driver documentation should specifically mention that wireless control is. It supported exactly because the control is too slow and unreliable. At no time ever use the wireless connection for a Samsung IP driver.
Cheers
Natalie
toggle quoted message
Show quoted text
On Jun 5, 2023, at 11:06 AM, Tony Golden <mrgolden@...> wrote:
?From my experience, Samsung IP control, ESPECIALLY if using Wi-Fi, is unreliable and should be avoided.
I can't tell if those messages are coming from the processor's Error Log, or the CCD module's Log output. The latter usually contains important clues when it's not working. I always give it a real signal name and connect it to an MSP, so I can watch it in Debugger.
Also, some Samsung TVs use port 1515, and others use 1516. Although the .dat file will specify the port to use, if your exact TV model isn't listed in its list of supported models, it could be different.
--- On Monday, June 5, 2023 at 9:58 AM, mark kaye wrote:
1st time using CCD on a display
keep getting
00:00:46.516 044-07:55:22.411 ( 1) [Info ] CORD | QLED Series :
Sending command 'GetAccessToken' to transport
00:00:47.734 044-07:55:23.624 ( 1) [Debug ] TSPT | HttpTransport :
Connection failed, error code: UNKNOWN_ERROR, connection failure elapsed
milliseconds: 31,993.
i get DriveLoaded, but connect fails
display is wifi
macaddr is correct & sending into attribute 4 before connect
display has both IP controls enabled
|
Re: CCD Samsung QLED can't connect
The CCD should request a new token if it gets an invalid response. You should see it display it again. If it isn¡¯t the handler for the token is in the json that defines the driver and can be edited as needed.
toggle quoted message
Show quoted text
On Jun 6, 2023, at 5:40 PM, Alex Teague <alext@...> wrote:
?I second what Tony said and I avoid it at all costs. Not sure if this unit is the same but you may have to use the manufacturer's remote and accept an on-screen popup to allow a connection and in turn provide a token for communication. If you miss it or don't accept it would fail connection.
|
Re: CCD Samsung QLED can't connect
I second what Tony said and I avoid it at all costs. Not sure if this unit is the same but you may have to use the manufacturer's remote and accept an on-screen popup to allow a connection and in turn provide a token for communication. If you miss it or don't accept it would fail connection.
|
Steve Adams
Gary Miller