The ccd driver documentation should specifically mention that wireless control is. It supported exactly because the control is too slow and unreliable. At no time ever use the wireless connection for a Samsung IP driver.
Cheers
Natalie
toggle quoted message
Show quoted text
On Jun 5, 2023, at 11:06 AM, Tony Golden <mrgolden@...> wrote:
?From my experience, Samsung IP control, ESPECIALLY if using Wi-Fi, is unreliable and should be avoided.
I can't tell if those messages are coming from the processor's Error Log, or the CCD module's Log output. The latter usually contains important clues when it's not working. I always give it a real signal name and connect it to an MSP, so I can watch it in Debugger.
Also, some Samsung TVs use port 1515, and others use 1516. Although the .dat file will specify the port to use, if your exact TV model isn't listed in its list of supported models, it could be different.
--- On Monday, June 5, 2023 at 9:58 AM, mark kaye wrote:
1st time using CCD on a display
keep getting
00:00:46.516 044-07:55:22.411 ( 1) [Info ] CORD | QLED Series :
Sending command 'GetAccessToken' to transport
00:00:47.734 044-07:55:23.624 ( 1) [Debug ] TSPT | HttpTransport :
Connection failed, error code: UNKNOWN_ERROR, connection failure elapsed
milliseconds: 31,993.
i get DriveLoaded, but connect fails
display is wifi
macaddr is correct & sending into attribute 4 before connect
display has both IP controls enabled
