Event Scheduler 2 v1.2.0 issues
Hello!
I have been trying to get this module to work without success and when I load to the controller it even has errors:
Module S-3.5.2:S-1 : eventsked2_v12 at line 1312: Overflow. Capacity = 16. Length = 30<LF><LF>
I've only seen it work once to load the schedule from the NVRAM and the rest of the time just writes #2 to it. Assuming the above error is normal what are the required conditions to write (all applicable days /months high, HH:MM and AM or PM high, plus select the specific event [I'm only using 1, but the fb for that doesn't seem to reflect that I selected it...]).
Thanks,
--Phil
|
Re: Mercury CCS-UC-1 w/Zoom?
The older mercury does not have a usb c. It is a usb B. Maybe double check over there.
toggle quoted message
Show quoted text
On 30 May 2023, at 18:52, FBC Tech Team <sound@...> wrote:
? Hi folks, Anyone have any ideas of why my Mercury CCS-UC-1 isn't appearing to the Zoom Rooms PC as a valid audio interface (neither mic or speakers)? Details in post below.
Thanks, Jeff
------------------------------------- Jeff Klein, DMC-E
Technical Director
Faith Baptist Church
Glen Burnie, Maryland
(Website / Twitter)
?/ @FBC_TechTeam / @mixingforjesus
"Clothe
yourselves, all of you, with humility toward one another, for God
opposes the proud but gives grace to the humble." 1 Peter 5:5
Hi folks,?
Coming out of my long lurking slumber to post once again :)
I picked up an older Crestron Mercury unit for peanuts to donate to my church's conference room, and am having some issues.
I have everything connected in my office per the Zoom Room setup guide using an Intel NUC that I bought separately.
Nuc HDMI to the TV, PC to the Mercury HDMI in, mouse/keyboard/Logitech Webcam (not the "Logitech C930e" though) to the NUC USB ins and Mercury USB-C to the NUC.
So, the issue I have is that Zoom Rooms will not see the Mercury as a mic/speaker choice. It only sees the Logitech webcam mic and the TV speakers connected to the NUC.
I've plugged the webcam into the Mercury USB/Cam input, but it doesn't see it at all (not surprising as it's one of the older B series. I may have a C9xx series at church to try).
There's nothing in the Mercury touch screen or web setup that yields any clues, all just show the webcam mic and TV speakers (if the webcam is in the NUC)?
1. Any ideas of what I'm doing wrong?
2. I didn't realize that you couldn't present a presentation from a laptop/PC with the Zoom Rooms setup (kinda limited), is there a newer version of Mercury/Flex that does?
Thanks,
Jeff
CONFIDENTIALITY NOTE:?The information
transmitted, including attachments, is intended only for the person(s) or
entity to which it is addressed and may contain confidential and/or privileged material.
Any review, retransmission, dissemination or other use of, or taking of any
action in reliance upon this information by persons or entities other than the
intended recipient is prohibited. If you received this in error, please contact
the sender and destroy any copies of this information.
|
Re: Mercury CCS-UC-1 w/Zoom?
Hi folks, Anyone have any ideas of why my Mercury CCS-UC-1 isn't appearing to the Zoom Rooms PC as a valid audio interface (neither mic or speakers)? Details in post below.
Thanks, Jeff
------------------------------------- Jeff Klein, DMC-E
Technical Director
Faith Baptist Church
Glen Burnie, Maryland
(Website / Twitter)
?/ @FBC_TechTeam / @mixingforjesus
"Clothe
yourselves, all of you, with humility toward one another, for God
opposes the proud but gives grace to the humble." 1 Peter 5:5
Hi folks,?
Coming out of my long lurking slumber to post once again :)
I picked up an older Crestron Mercury unit for peanuts to donate to my church's conference room, and am having some issues.
I have everything connected in my office per the Zoom Room setup guide using an Intel NUC that I bought separately.
Nuc HDMI to the TV, PC to the Mercury HDMI in, mouse/keyboard/Logitech Webcam (not the "Logitech C930e" though) to the NUC USB ins and Mercury USB-C to the NUC.
So, the issue I have is that Zoom Rooms will not see the Mercury as a mic/speaker choice. It only sees the Logitech webcam mic and the TV speakers connected to the NUC.
I've plugged the webcam into the Mercury USB/Cam input, but it doesn't see it at all (not surprising as it's one of the older B series. I may have a C9xx series at church to try).
There's nothing in the Mercury touch screen or web setup that yields any clues, all just show the webcam mic and TV speakers (if the webcam is in the NUC)?
1. Any ideas of what I'm doing wrong?
2. I didn't realize that you couldn't present a presentation from a laptop/PC with the Zoom Rooms setup (kinda limited), is there a newer version of Mercury/Flex that does?
Thanks,
Jeff
CONFIDENTIALITY NOTE:?The information
transmitted, including attachments, is intended only for the person(s) or
entity to which it is addressed and may contain confidential and/or privileged material.
Any review, retransmission, dissemination or other use of, or taking of any
action in reliance upon this information by persons or entities other than the
intended recipient is prohibited. If you received this in error, please contact
the sender and destroy any copies of this information.
|
Re: flush interval increased to XX minutes...
errlog plog current
This may give you more/different details vs ERR
|
Re: Receiver Channel presets
VTpro has the 'TV Presets Application v2' that would provide this feature (I personally have not used it...)
Or if you just wanted a simple name and chan#, you could use the ARAM and SRAM symbols to store/recall thru reboots. Make sure that they're at the top of your logic folder...
Others may have more details for you...
|
flush interval increased to XX minutes...
I remember once watching Toine explaining about how they had to change the rules on how often the processor writes stuff to the Plogs to avoid issues like the flash memory wear-downs on the beloved MC3's...
Question is, let's say I'm troubleshooting a system, I see the errors, and the flush interval has been increased to 32 minutes.... is there a way for me to force-flush just so I can grab the PLog file for further analysis?
Alternatively, I know I can always print err on the console and grab that, but sometimes it would be nice to just have the complete PLog file...
?
Is there a console command for this?
|
Re: DM8x8 - all 5 room boxes have problems?
moved all room boxes to rack - they work
moved output boxes back into conference room - didn't show up in tools
tried local injector still didn't work
moved all cables back to original positions and then all of a sudden they were there and working - magic?
only 1 box under the table showed up in tools
hdmi on flip top seemed to be broken - bypassed and hdmi worked
moved the poe supply to the other 2 to another port - now they worked
hdmi broken on another
so now everything works and i didn't really do anything
need the female/male hdmi adapters for the table tops
|
Re: Need guidance for setting up AVLINKPRO CH-100 with Crestron Home panels.
That's my impression as well. The doc is far from straight forward.
Will definitely contact them. Thanks.
|
Re: Need guidance for setting up AVLINKPRO CH-100 with Crestron Home panels.
I would reach out to AVLINKLPRO directly for help setting it up. Documentation is severely lacking and often they need to firmware update to get it running. I've yet to get one up and running without their assistance.?
|
Re: Need guidance for setting up AVLINKPRO CH-100 with Crestron Home panels.
I would reach out to AVLINKLPRO directly for help setting it up. Documentation is severely lacking and often they need to firmware update to get it running. I've yet to get one up and running without their assistance.
|
Need guidance for setting up AVLINKPRO CH-100 with Crestron Home panels.
Hello guys, hope you're all doing very well.
I'm having lots of issues following the documentation for the integration of the AVLINKPRO CH-100 interface with Crestron Home panels. It's very convoluted IMO.
Does anybody here with experience can give me a few pointers on how to achieve this integration?
We are using a DoorBird video doorbell (front door) with (3) TSW-1070-R's inside the home, and the goal is to provide the customer with the ability to make and receive calls from every panel in the house.
Really appreciated.
|
need help on something
The main idea is the client want to save the channel presets by himself, by putting the channel name and number and save it from the iPad , now the system is working by preserved channels and the client is selecting from them.
so the client will put the name and the number of the channel and save it, or delete it.
|
Mobile Pro G is still available if you already own it.? However, it is not available to new users.? There is a Crestron answer ID that has the procedure to download it.? It won't show up in the Apple App Store but if you click the user icon in the upper right corner and go to Purchase App section, you will have a cloud download link you can use.? At least that is what I remember when I did it.
toggle quoted message
Show quoted text
Angel Marti
Last week I have a call from one client, he was still using the Crestron Mobile Pro G in his iPad. He had reinstall the iOS (I don't know why he couldn't make a restore from a backup), and when he try to download the Pro G is no longer available in the appstore. I check it out in my iPhone and in my iPad and neither.
|
On Mon, May 29, 2023 at 12:45 PM, Angel Marti wrote:
So now I gonna have to tell him he needs to buy another app and? remake VT Pro project to the new version???
And FTR, the standard-to-SmartGraphics Conversion in VTPro leaves ALOT to be desired...
|
Has anyone successfully used these with regular processor? I have used successfully with VC4-PC3 but trying to get working on CP4 and need to use client /server not 3 series?EISC.
|
Last week I have a call from one client, he was still using the Crestron Mobile Pro G in his iPad. He had reinstall the iOS (I don't know why he couldn't make a restore from a backup), and when he try to download the Pro G is no longer available in the appstore. I check it out in my iPhone and in my iPad and neither.
So now I gonna have to tell him he needs to buy another app and? remake VT Pro project to the new version???
I can't believe this.
|
Re: DM8x8 - all 5 room boxes have problems?
i'm not fond of studio either, but it was working when installed, so i am told
has gradually lost functionality over time as the room boxes have failed
various people have tried to work around the issues, but i found all cabling (that i could see) to still be correct
it has a clearone system on the table now, not sure what was there originally
i only see audio from the DM to the amp, no DSP
client says table audio goes to PC??
|
Hi! I am looking for a QM-RMC to buy from the European Union market. Does anyone have one to sell?
|
Re: DM8x8 - all 5 room boxes have problems?
|
Re: DM8x8 - all 5 room boxes have problems?
Bring jumpers and connect the endpoints to the chassis at the rack. Could have bad terminations
|
nicofreda
fabiodaubermann