Keyboard Shortcuts
Likes
- Crestron
- Messages
Search
|
Re: In Today's Episode of "Shouldn't that behavior be different...?"
Ditto on seeing this type of behavior from time to time too.? More it is where the signals show up red or green as if they go no where.? Yet if I highlight one of them and hit F2, you can clearly see that they are going some place.? Usually happens after I modify something in the program.? I don't believe it has ever happened when I open a program.
|
|
Re: In Today's Episode of "Shouldn't that behavior be different...?"
I have actually seen this type of behavior from time to time. I stumble across signals that have no destination/driving yet the program compiles with 0 warnings/errors. Makes me wonder sometimes what else isnt getting picked up? I dont use the signal completion color feature as it seems to slow things down (even more than it alreday is) for me.?
|
|
TSR-310 integration with Applehomekit
I have been trying to integrate TSR-310 with apple homekit using the documentation provided by Crestron. I have been able to get "ready" status on my remote but while pairing the device on apple home app on my iPad it just keeps on loading forever,when i click on add accessory. Thanks in advance. |
|
Re: Lutron Radio Ra2 switches
#lutron
Use the dimmer module, send the analog value to 0% for off and 100% for on.?
|
|
Re: Somfy URTSI II
I Think The Problem You Are Having Is Like What Someone as Said Below. The RTS Shade Motor Is Kind Of Like A Garage Opener it can Learn Multiple Shades Controls In It Weather It Be A Handheld Remote or? A Urtsii. The Easiest Thing Might Be To Reset The Motor To Defaults And Re-Learn The Hand Control First Then Re-Learn The Urtsii At The Correct Address. Maybe This Will Help.
|
|
Re: In Today's Episode of "Shouldn't that behavior be different...?"
Wait till you see the weird behavior with Smart Graphics now when it creates folders for media players then errors you out even if you delete the folders.? Then they magically re-appear!? Yay!
-- Ryan Baldwin CEO | XS Design Studios rbaldwin@... 760.712.2240 |
|
Re: In Today's Episode of "Shouldn't that behavior be different...?"
¿ªÔÆÌåÓý¶Ù³Ü°ù°ù°ù°ù°ù¡. ? Blame it on a lack of caffeine¡ PEBKAC this time around¡ I apparently had commented out that EQU and just not noticed until 4 seconds after I clicked send. ? Nothing to see here J ? -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D ? From: [email protected] [mailto:[email protected]]
On Behalf Of Lincoln King-Cliby via groups.io
Sent: Monday, June 28, 2021 10:58 AM To: [email protected] Subject: [crestron] In Today's Episode of "Shouldn't that behavior be different...?" ? Working on an old program ¨C backing out some old logic and putting some new logic in its place. ? Thought I was done. Program complies cleanly so nothing to worry about (at least as far as loose ends that still need to be snipped) Right? ? Huh. What about this EQU? Ok, it¡¯s output doesn¡¯t go anywhere¡ SIMPL shows the signal as green¡ F12 ? Nope, still compiles with 0 warnings and 0 errors ? Shouldn¡¯t it though? ? -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D ? |
|
In Today's Episode of "Shouldn't that behavior be different...?"
¿ªÔÆÌåÓýWorking on an old program ¨C backing out some old logic and putting some new logic in its place. ? Thought I was done. Program complies cleanly so nothing to worry about (at least as far as loose ends that still need to be snipped) Right? ? Huh. What about this EQU? Ok, it¡¯s output doesn¡¯t go anywhere¡ SIMPL shows the signal as green¡ F12 ? Nope, still compiles with 0 warnings and 0 errors ? Shouldn¡¯t it though? ? -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D ? |
|
Re: ATEM Television Studio HD
We've also used the Skaarhoj ATEM link with no issues on a few jobs.? The nice thing is with it, you can use the control software from BMD and the Skaarhoj will tell you what command was sent from the software so you can then put that same command in the crestron control if your client wanted a particular set of controls.? We've used it to easily do PIP and a few other things.
|
|
Lutron Radio Ra2 switches
#lutron
Hello Guys,
I'm doing project with Lutron Radio Ra2 integration. Using Modules from the Files section (Lutron Radio RA2 Modules for Crestron r05) Dimmers are working fine, but I can't figure our how to control switches. I have there few Maestro 8 A Switch With?Neutral. Do I need to use same dimmer module to control switches? Thank you! |
|
Re: Toolbox Debugger does show the state changes but not the signal names anymore
I also found this when I opened up toolbox on an old virtual machine. If I recall correctly it was something to do with the low resolution setting I had in the virtual machine, I just had to resize the columns (or make the toolbox window bigger) as all the signal info had been simply pushed off to the right out of view. TH Il giorno sab 26 giu 2021 alle 16:39 ckangis <chris@...> ha scritto: Give us your Software versions list.... --
Regards Tony Howard ? ?T???|???B???|???T? ? |??tony@...??|??+39 333 5971791? |
|
Re: Sony VPL-FHZ75 Serial control
Sony projectors use even parity, it's tripped me up once or twice. -Brendon On Sat, Jun 26, 2021 at 6:44 PM Benjamin Brotcke <BBROTCKE@...> wrote:
--
Brendon Packwood |