Re: Shure MXA910 protocol details

Thank you all for the helpful responses.

-Lou

Re: Getting an Xpanel to run on a Mac using Parallels

I think it needs to be windows side.

Could be network settings (device-network) for the VM in parallels, I usually use bridged-default adapter unless I am doing VPN then I have to use shared. ?Funny, shared works sometimes locally and sometimes not. ?Bridged always works locally.

IE or edge? ?

Can they connect to the processor with toolbox?

From: <Crestron@...> on behalf of "Heather Baiman heather@... [Crestron]" <Crestron@...>
Reply-To: <Crestron@...>
Date: Wednesday, July 25, 2018 at 6:05 AM
To: "Crestron@..." <Crestron@...>
Subject: [Crestron] Getting an Xpanel to run on a Mac using Parallels

We do several Savant projects where Crestron may be the HVAC or Video (DM/NVX) system. It seems every time I make an Xpanel for our techs to use to test the Crestron side, they can't get it to load on their damn MACs.? Pretty sure they all use Parallels and I make the Xpanel so that it runs off the Crestron processor.

?

What's the trick to getting it to run on either the MAC side or Windows side?

?

Presently the tech is telling me that, "...XPanel just keeps saying Loading Interface."

?

I can run it here from my desk with no issue, using real Windows.

?

Re: Shure MXA910 protocol details

#228244

I am interested.

-Lou

Re: CEN-NSP1 Player dropping from the network

#228243

Yes,

I have DNS 1 8.8.8.8

and DNS 2 is my provider's DNS.

Re: CEN-NSP1 Player dropping from the network

#228227

Does it have a DNS set

Sent from my pocket computer

Re: Shure MXA910 protocol details

#228226

Chip, we must be talking about different mics?? I'm referring to the MXA910 Ceiling mic (only has 1 LED on it), it sounds like you may be referring to the tabletop version that has the color ring (MXA310?).? Sorry for any confusion, I haven't used the tabletop ones yet, so don't know if those are different.

Polycom Group 700 DTMF dialing issue

#228225

Hi All,

 I have a Polycom Group 700 codec running firmware version 6.1.3 in which the DTMF dialing doesn’t work from the Crestron module which is the Polycom Realpresence Group Series v2.5. Debugger doesn’t show strings being sent upon button presses. Any thoughts?

Thanks.

Re: Sony SRG-300H controlling over IP not saving presets

#228224

I can confirm that the OSD issue of these cameras is fixed using method of Crestronfreak55.? I was experiencing same issue with similar model camera and could not figure out how to prevent OSD from showing message when saving/recalling presets.

Yesterday I changed setting in menu to disable OSD Messages, then with that message off, saved all presets (just in case).? The OSD message issue didn't come back.

Not sure if it was preset 1 that did the trick or not, as I saved into all the preset slots so recalling wouldn't bring it back, but it worked like a charm.? Thanks for the info on this!? Not intuitive at all.

-jason

Re: Getting an Xpanel to run on a Mac using Parallels

#228223

If by "the XPanel runs off the Crestron processor", you mean it's a web X-Panel
instead of an exe, then I'd say that's the problem.

I always use exe X-Panels because of all the issues the browser panels seem to
have - network issues, browser issues, security issues, OS issues, etc.  An exe
is "self-contained" and much less troublesome.  The only issue I've seen with
Macs, is the actual Adobe Air installation which is a little more complicated
than doing it on Windows.

I won't comment on the use of Savant... :-)

Show quoted text

--- On Wednesday, July 25, 2018 at 9:06 AM, Heather Baiman wrote:

We do several Savant projects where Crestron may be the HVAC or Video (DM/NVX)
system. It seems every time I make an Xpanel for our techs to use to test the
Crestron side, they can't get it to load on their damn MACs.? Pretty sure they
all use Parallels and I make the Xpanel so that it runs off the Crestron
processor.

What's the trick to getting it to run on either the MAC side or Windows side?

Presently the tech is telling me that, "...XPanel just keeps saying Loading
Interface."

I can run it here from my desk with no issue, using real Windows.

Re: LG Closed Caption Serial String

#228222

Yes? using built in tuners for the TV's

Everything?works great,

?just can't find a serial string for the TV tuner for CC

?Most are LG 55LV340H? but there are some older 50" models,

All are working with same code module

Bartenders sometimes turn on CC with a remote or phone app.

I want to add this to the system restart command in the mornings

to turn off all the CC.

Thanks for the reply

Re: Shure MXA910 protocol details

[email protected]

#228228

Same basic idea here. I've found that if I'm muting in a DSP or codec, it is better to just change the LED brightness or unmuted color in the mic so AEC doesn't have to reconverge when the mic unmutes again. Also, after looking at the module, I love that we have come to nearly the same conclusion development-wise, albeit separately.

Since we're talking Shure products, I have fairly lightweight modules for the Shure ULX-D and QLX-D wireless mics—mostly channel volume/mute and transmitter type. I have been using tx type status responses from the units to automatically recall handheld/lav transmitter presets in DSPs without having to expose buttons for these functions on a UI. I can post them if anyone is interested.

Shure DCS-6000

#228221

Good Morning

Has anyone managed the shure Digital Conference System?model dcs-6000?

If so, could they help me.

I did not find the control API for this system.

TKS

Ricardo?

Re: Shure MXA910 protocol details

#228220

I do the same.

0 = Off

1 = Dim

2 = Bright (default)

Show quoted text

On Tue, Jul 24, 2018 at 9:20 PM jasonmussetter@... [Crestron] <Crestron@...> wrote:

?

Hey Chip,? I've had to control the LED color and LED on/off before, and I was able to do it without presets.? I had to use the "brightness" command and set it either to 0 or 2?? (full off or full on) to make the led go off.? Not sure if this is similar to what you were doing, but using the brightness wasn't exactly my first instinct to use.

My use case, was that the client wanted to have the mic to track the VoIP phone.? If the phone was not in use, the LED would be OFF.? If the VoIP was off-hook, the LED would track Red/Green with privacy mute.? The awesome part is that you can change the colors still while the brightness is OFF.? So you can have simple code track red/green, and another peice of simple code track hook on/off and change the brightness to off/full and it works great.

No Presets required.

-jason

CEN-NSP1 Player dropping from the network

#228218

Hi Everyone,

Is anyone having or had a problem where the NSP1's drops from the network and Crestron can't find it again when I go to the touch panel's media player and is not there anymore. I try to discover it in toolbox and can't find it anymore, I tried pinging the IP which is a static IP and I get no reply. Then I have to unplug and plug it back in again.

This happens occasionally.?

New file uploaded to Crestron

[email protected]

#228215

Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the Crestron
group.

  File        : /Programs/Shure MXA Test_archive.zip
  Uploaded by : chipmoodycs <chipmoody@...>
  Description : Various control commands / response actions used on an MXA310W

You can access this file at the URL:

To learn more about file sharing for your group, please visit:

Regards,

chipmoodycs <chipmoody@...>

Re: Shure MXA910 protocol details

#228216

开云体育

Use the Brightness command to turn the LED off. I usually don’t even mute it since I am already muting the DSP. I just send commands for changing the unmuted color from green to red or from a color to no light. I have a module that I can’t share unfortunately that does parse out the preset names. Nothing difficult about parsing the feedback if needed. They would be the perfect product if they provided a second LAN port for control, IMO.

-Davis

Re: Shure MXA910 protocol details

#228217

"The awesome part is that you can change the colors still while the brightness is OFF"

I *think* we're talking about different LEDs.? I can control the *ring* no problem - it's the "mic mute" LEDs I'm talking about.

? - Chip

Re: Lyntec Power Control

#228214

Thanks!?? I'm assuming this is done on a stepper?? Is this login only required once, or everytime you want to communicate?

Re: usb-ext-dm MAC address

#228213

Thank you Lincoln and Josh, this is great info! ?The white paper describes how the Crestron module would talk to the units. ?Turns out there is an unimplemented/unused function in the USB-EXT-DM module diGetDevices, that when pulsed sends out the discovery broadcast message, but the control system does not receive any feedback for this. ?If you have Wireshark running when you pulse this, you'll get back information on each unit on the network.

Source: 0.0.0.0

Destination: 255.255.255.255

Protocol: UDP

Info: 6137 → 6137 (Port)

Packet detail:

Ethernet II, Src: IcronTec_XX:XX:XX (00:1b:13:XX:XX:XX), Dst: Broadcast (ff:ff:ff:ff:ff:ff)

Thanks All!

Getting an Xpanel to run on a Mac using Parallels

Heather Baiman

#228212

开云体育

We do several Savant projects where Crestron may be the HVAC or Video (DM/NVX) system. It seems every time I make an Xpanel for our techs to use to test the Crestron side, they can't get it to load on their damn MACs.? Pretty sure they all use Parallels and I make the Xpanel so that it runs off the Crestron processor.

?

What's the trick to getting it to run on either the MAC side or Windows side?

?

Presently the tech is telling me that, "...XPanel just keeps saying Loading Interface."

?

I can run it here from my desk with no issue, using real Windows.

?