Thank you Lincoln and Josh, this is great info! ?The white paper describes how the Crestron module would talk to the units. ?Turns out there is an unimplemented/unused function in the USB-EXT-DM module diGetDevices, that when pulsed sends out the discovery broadcast message, but the control system does not receive any feedback for this. ?If you have Wireshark running when you pulse this, you'll get back information on each unit on the network.
Source: 0.0.0.0
Destination: 255.255.255.255
Protocol: UDP
Info: 6137 ¡ú 6137 (Port)
Packet detail:
Ethernet II, Src: IcronTec_XX:XX:XX (00:1b:13:XX:XX:XX), Dst: Broadcast (ff:ff:ff:ff:ff:ff)
Thanks All!
