¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Messages
Expanded Topics Messages Polls
Date
Discreet Input IR Commands for Samsung Sound bars (HW K950)

 

Wondering if any has come across Discreet Input IR commands for samsung sound bars (HW K950) i got a project where we have the TV audio on the digital input, and separate music input on the analog in. I would like to switch inputs on the sound bar but i doubt there will be any.


Thanks.
TSWPanels ANd Holovision VIO cr

[email protected]
 

Does anyone have a sample program to work with this unit ? trying to figure how to communicate with it to trip relays, adjust tones and Vol Etc. Thanks
Re: Crestron DM System - Detecting a DM transmitter by IPID

 

yeah i only have to do this for 4 transmitters, so wont need to read and write. question though in this command "rcon slot x.1 est\r" what is the x.1? if i wanted to query input 4/5/6/7 on a DM 16x16 frame how would that string look for each?
Re: Samsung TVs IR control discrete power on doesn't work after being off a long time

 


With all the Energy Smart stuff we've found many devices need a little push to wake up. On most of our Samsung models we send the power on command twice,(power off too) works every time
Re: Bose Soundtouch 300

 

Did you ever figure this out??
Updated SmartThings Interface Code

 

Something changed on either the SmartThings or Crestron side that introduced a bug in the code for an occupancy sensor connected a SmartThings hub. ?I've loaded an update onto github. ?In addition, because people where having trouble getting the code configured properly I've added documentation in the github readme file for the project on how to properly get all this configured.?

Thanks to Casey for his help on this.

The code can be found here


Thanks

Jay
Re: Lighting based on multiple occ sensors

 

IMO, it wouldn't work very reliably because the Occ sensors have timeouts and can be tripped from multiple distances.? You'd be better off putting a beam sensor at each end of the stairs and then monitoring sensors to determine direction.

Top or bottom of stairs gets tripped and sets a latch.? When you get to the other end (or turn around and cross the beam again), it clears the latch.? If neither end is latched, when you cross a beam, then it will know which side you are coming from and trigger the correct loads.

Example:

Trip the beam at top of stairs
IF the top beam is already latched (you've turned around) then clear the latch
IF the bottom beam was crossed then clear the latch for the bottom beam
IF the bottom beam hasn't been crossed then turn on the lights at the bottom of the stairs and set a latch.

Trip beam at bottom of stairs
IF the bottom beam is already latched (you've turned around) then clear the latch
IF the top beam was crossed then clear the latch for the top beam
IF the top beam hasn't been crossed then turn on the lights at the top of the stairs and set a latch.
Re: Samsung TVs IR control discrete power on doesn't work after being off a long time

 

¿ªÔÆÌåÓý

OP

?

Try using the UN55ES8000 IR codes from the Crestron Database.? Been using it for years for discrete¡¯s, up to this year¡¯s KS9000

?

Trey

?

From: Crestron@... [mailto:Crestron@...]
Sent: Tuesday, January 17, 2017 4:39 PM
To: Crestron@...
Subject: [Crestron] Samsung TVs IR control discrete power on doesn't work after being off a long time

?

?

This is strange but something that we've noticed with two Samsung TVs on a particular job: If "warm" then the discrete power code for "on" works fine. But if "cold" ie first time turned on in the morning, then the power on code never works first time. The factory remote with its toggling code always turns them on just fine. This is the same Samsung discrete IR codeset I've used for years which I think got from this group originally (Samsung UN46B8000XF.ir).?

?

Anyone seen this before? Does sending multiple power commands eventually wake it up? Not on site to test, getting this third had from tech on site.

?

Thx in advance

?

OP

?
Re: Lighting based on multiple occ sensors

 

Assuming 2 motion detectors (one at the top of the stairs and one at the bottom). ?One solution is to run the motion detectors into logic wave pulse symbols so the output of the motion sensor is reduced to a single logic wave and can then be run into a truth table without worrying about circular logic. ?If the top of stair or bottom of stair motion detector is tripped and the other motion detector hasn't been tripped (latch is clear) then start the appropriate scene and set the latch. ?If one of the motion detectors is tripped and the latch is set then don't do anything because you've already started your lighting scene.

Every time a motion detector is tripped trigger a retriggerable one shot. ?This is going to be the timeout period for the lighting scene. ?After the ROS has expired the person has left the stairs and you can turn off the lighting scene and clear the latch. ?

I personally like using truth tables.?

This is going to require some real world testing. ?You could have issues with multiple people going different directions, etc. It will depend on how your scenes act.

Hope this helps

Jay

------ Original Message ------
From: "ComeAlive@... [Crestron]" <Crestron@...>
Sent: 1/19/2017 2:05:52 PM
Subject: [Crestron] Lighting based on multiple occ sensors

?

Have a client that has multiple occupancy sensor in his staircase and would like to trigger different loads in different ways depending on which direction he is going. Up versus down of course. ?Anybody done something similar and would like to share? ?Or suggest ideas on just how to accomplish this.
Re: Multi zone hvac control.

[email protected]
 

CoolMaster Net

On Jan 19, 2017 3:30 PM, "dave.dunaway@... [Crestron]" <Crestron@...> wrote:
?

Are there any new hvac zone controllers that communicate in similar fashion to the old carrier comfort zone systems?


Lighting based on multiple occ sensors

 

Have a client that has multiple occupancy sensor in his staircase and would like to trigger different loads in different ways depending on which direction he is going. Up versus down of course. ?Anybody done something similar and would like to share? ?Or suggest ideas on just how to accomplish this.
Re: Adding a stop command after PZT action controlling a camera

Bob Smith
 

Thanks for the reply guys worked perfectly!


On Thursday, January 19, 2017 3:11 PM, "oliver.hall@... [Crestron]" wrote:


?
Fair point Chip.
Re: Adding a stop command after PZT action controlling a camera

 

Fair point Chip.
Multi zone hvac control.

[email protected]
 

Are there any new hvac zone controllers that communicate in similar fashion to the old carrier comfort zone systems?
Re: Custom Animated Objects

 

email me at kgossen at resitechsolutions dot ca.

I have a couple questions to ask you first.
Re: Custom Animated Objects

 

Any chance you wanna make a YouTube video of this process? :)

On Thu, Jan 19, 2017 at 8:14 AM kgossen@... [Crestron] <Crestron@...> wrote:

I open up the theme in Studio, Copy the images into resources, create my Image Map, then create a Animation Style for it. Now I have the different animations available whenever I need one because they are now a permanent part of my theme.?
Re: Latest version of Samsung EXlink protocol

 

One-way serial. ?The issue is one way serial port goes between 0 and 5 volts as opposed to the ¡°full¡± com ports which go between -13 and + 13 volts. ?Some devices prefer the ¡°TTL version" of rs-232.

From: <Crestron@...> on behalf of "floyd1212@... [Crestron]" <Crestron@...>
Reply-To: <Crestron@...>
Date: Thursday, January 19, 2017 at 9:19 AM
To: <Crestron@...>
Subject: [Crestron] Re: Latest version of Samsung EXlink protocol

?

Phil,

Are you saying to use the same commands, but on an IR port setup for 1-way serial?? Or are you saying you have converted to just using IR codes?
Re: Sharp Serial Port

 

Always send the RSPW 1 when the TV is on. ?I send it 1 second before power off every time.

From: <Crestron@...> on behalf of "rickmcneely@... [Crestron]" <Crestron@...>
Reply-To: <Crestron@...>
Date: Wednesday, January 18, 2017 at 11:41 AM
To: <Crestron@...>
Subject: [Crestron] Re: Sharp Serial Port

?

I believe that (in most cases) the RSPW1 command must be sent when the display is already on.
Re: Latest version of Samsung EXlink protocol

 

Phil,

Are you saying to use the same commands, but on an IR port setup for 1-way serial?? Or are you saying you have converted to just using IR codes?
Re: Custom Animated Objects

 

I open up the theme in Studio, Copy the images into resources, create my Image Map, then create a Animation Style for it. Now I have the different animations available whenever I need one because they are now a permanent part of my theme.?
37221 - 37240 of 256499