Re: Latest SWAMP firmware: Added doorbell feature capabilities

#210510

I talked to Crestron about this. They have just improved the "global interrupt" speed. Basically, you can trigger your doorbell audio faster because all the zones' volume, power state, and source initialization is faster now.

Re: Panasonic AW-HE130

#210508

It's interesting for me too, using camera HE60

Re: Off Topic: TV Tuners

#210507

I've used Technomate boxes in Greece with no issues.

Re: New smart graphics update problems

[email protected]

#210509

Yeah the Crestron app as well is updated.. To the current latest from App Store.. 

But no luck ...

Aziz

Re: Panasonic AW-HE130

#210506

Hi,

Can you share module with me as well? We are using HE120.

Re: Panasonic AW-HE130

#210505

I just sent you a message, the code is for a aw-he70, but they should use the same commands.

Re: Prodigy Lighting and a MC3

[email protected]

#210504

Check out today's firmware. ?Allows you to add Prodigy devices directly onto a 3-series processor.

Re: Off Topic: TV Tuners

#210503

Do you really need PAL (standard def analog) or do you need DVB-T/DVB-T2 (the most-of-the-rest-of-the-world* answer to North America's ATSC/HD/SD digital broadcasting)? 

I don't really have an answer for you either way but if you're looking for true PAL it's not going to look much better than composite anyway, on the other hand if you need one of the DVB equivalents make sure you're looking for DVB support. 

*- Major exceptions include most of South America/Japan, using ISDB-T; and China, using DTMB
--
Lincoln King-Cliby, CTS, DMC-E-4K/T/D
Commercial Market Director
Sr. Systems Architect | Crestron Certified Master Programmer (Gold) 
ControlWorks Consulting, LLC
V: 440.449.1100 x1107 F: 440-449-1106 I: 
Crestron Services Provider | Biamp Audia Certified | Extron Authorized Programmer

Show quoted text

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] 
Sent: Monday, January 18, 2016 10:43 AM
To: Crestron@...
Subject: Re: [Crestron] Off Topic: TV Tuners

Yea I looked at them they only had one that they said that did PAL and it was a composite or s-video feed. I normally use there stuff. But it's so hard to find somthing that does PAL it seems.

------------------------------------
Posted by: cjh22304@...
------------------------------------

Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.

------------------------------------

Yahoo Groups Links

Re: Off Topic: TV Tuners

#210502

Yea I looked at them they only had one that they said that did PAL and it was a composite or s-video feed. I normally use there stuff. But it's so hard to find somthing that does PAL it seems.

Re: Panasonic AW-HE130

#210501

I was wondering if anyone had / could post a new version of this module that would help with the lockup issues we are seeing.?

Re: CEN-RGFWEX on Cresnet and Ethernet

#210500

开云体育

That is the weakest talk….

?

?

Show quoted text

From: Crestron@... [mailto:Crestron@...]
Sent: Monday, January 18, 2016 9:51 AM
To: 'Crestron@...'
Subject: RE: [Crestron] Re: CEN-RGFWEX on Cresnet and Ethernet

?

It is awfully crowded…

?

--

Lincoln King-Cliby, CTS, DMC-E-4K/T/D

Commercial Market Director

Sr. Systems Architect | Crestron Certified Master Programmer (Gold)

ControlWorks Consulting, LLC

V: 440.449.1100 x1107 F: 440-449-1106 I:

Crestron Services Provider | Biamp Audia Certified | Extron Authorized Programmer

?

From: Crestron@... [mailto:Crestron@...]
Sent: Monday, January 18, 2016 8:45 AM
To: 'Crestron@...' <Crestron@...>
Subject: RE: [Crestron] Re: CEN-RGFWEX on Cresnet and Ethernet

?

Cue Lincolns talk about the 2.4 spectrum allocation in his house.

?

?

From: Crestron@... [mailto:Crestron@...]
Sent: Sunday, January 17, 2016 6:52 PM
To: Crestron Yahoo Group
Subject: Re: [Crestron] Re: CEN-RGFWEX on Cresnet and Ethernet

?

A 2nd gateway would be a fairly inexpensive option too.

Geoff

?

On Sun, Jan 17, 2016 at 6:23 PM, Lincoln King-Cliby lincoln@... [Crestron] <Crestron@...> wrote:

?

Steve is correct -- not although "tinkerer" is a bit more friendly than "cheapo" which may be slightly closer to the truth ;) -- if I could justify the cost of replacing the PRO2 with a PRO3 and the CP2E with a CP3 the tinkering would be wholly unnecessary and the question would be moot.

But as those aren't quite available, much less plentiful at the prices I'm willing to pay (e.g. around 1/8 of dealer cost in the case of the PRO3) I'm left going for the ball-o-twine-and-duct-tape ideas...

Initial tests (using the current Pro2 program with a Cresnet EX gateway dropped in) are not promising but at least not catastrophic -- gateway shows up at the proper ID and all of the devices defined in the lighting program continue to work as expected but the MLX3 defined on the PRO2 Cresnet instance of the gateway just plays dead -- no update requests show up in console, no feedback shows up on the remote...

So it seems my evil plot has been foiled by the gateway and I'll just build an EISC over to the CP2E for the MLXes...

Lincoln
--
Lincoln King-Cliby, CTS, DMC-E-4K/T/D
Commercial Market Director
Sr. Systems Architect | Crestron Certified Master Programmer (Gold)
ControlWorks Consulting, LLC
Crestron Services Provider | Biamp Audia Certified | Extron Control Professional

-----Original Message-----
From: Crestron@... [mailto:Crestron@...]
Sent: Sunday, January 17, 2016 1:38 PM
To: Crestron@...
Subject: [Crestron] Re: CEN-RGFWEX on Cresnet and Ethernet

I think you guys are missing what he's asking. Lincoln is a tinkerer who loves to try things that are out of the norm. He's asking if anyone has connected the gateway to one processor via Ethernet and also to a seperate processor via Cresnet (which wouldn't require 2 IP table entries). I'm sure we'll hear back from him soon regarding whether or not it worked :)

------------------------------------
Posted by: steve@...
------------------------------------

Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.

------------------------------------

Yahoo Groups Links

?

Re: CEN-RGFWEX on Cresnet and Ethernet

#210499

开云体育

It is awfully crowded…

?

--

Lincoln King-Cliby, CTS, DMC-E-4K/T/D

Commercial Market Director

Sr. Systems Architect | Crestron Certified Master Programmer (Gold)

ControlWorks Consulting, LLC

V: 440.449.1100 x1107 F: 440-449-1106 I:

Crestron Services Provider | Biamp Audia Certified | Extron Authorized Programmer

?

Show quoted text

From: Crestron@... [mailto:Crestron@...]
Sent: Monday, January 18, 2016 8:45 AM
To: 'Crestron@...' <Crestron@...>
Subject: RE: [Crestron] Re: CEN-RGFWEX on Cresnet and Ethernet

?

Cue Lincolns talk about the 2.4 spectrum allocation in his house.

?

?

From: Crestron@... [mailto:Crestron@...]
Sent: Sunday, January 17, 2016 6:52 PM
To: Crestron Yahoo Group
Subject: Re: [Crestron] Re: CEN-RGFWEX on Cresnet and Ethernet

?

A 2nd gateway would be a fairly inexpensive option too.

Geoff

?

On Sun, Jan 17, 2016 at 6:23 PM, Lincoln King-Cliby lincoln@... [Crestron] <Crestron@...> wrote:

?
Steve is correct -- not although "tinkerer" is a bit more friendly than "cheapo" which may be slightly closer to the truth ;) -- if I could justify the cost of replacing the PRO2 with a PRO3 and the CP2E with a CP3 the tinkering would be wholly unnecessary and the question would be moot.

But as those aren't quite available, much less plentiful at the prices I'm willing to pay (e.g. around 1/8 of dealer cost in the case of the PRO3) I'm left going for the ball-o-twine-and-duct-tape ideas...

Initial tests (using the current Pro2 program with a Cresnet EX gateway dropped in) are not promising but at least not catastrophic -- gateway shows up at the proper ID and all of the devices defined in the lighting program continue to work as expected but the MLX3 defined on the PRO2 Cresnet instance of the gateway just plays dead -- no update requests show up in console, no feedback shows up on the remote...

So it seems my evil plot has been foiled by the gateway and I'll just build an EISC over to the CP2E for the MLXes...

Lincoln
--
Lincoln King-Cliby, CTS, DMC-E-4K/T/D
Commercial Market Director
Sr. Systems Architect | Crestron Certified Master Programmer (Gold)
ControlWorks Consulting, LLC
Crestron Services Provider | Biamp Audia Certified | Extron Control Professional

-----Original Message-----
From: Crestron@... [mailto:Crestron@...]
Sent: Sunday, January 17, 2016 1:38 PM
To: Crestron@...
Subject: [Crestron] Re: CEN-RGFWEX on Cresnet and Ethernet

I think you guys are missing what he's asking. Lincoln is a tinkerer who loves to try things that are out of the norm. He's asking if anyone has connected the gateway to one processor via Ethernet and also to a seperate processor via Cresnet (which wouldn't require 2 IP table entries). I'm sure we'll hear back from him soon regarding whether or not it worked :)

------------------------------------
Posted by: steve@...
------------------------------------

Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.

------------------------------------

Yahoo Groups Links

?

Re: IOS Today in Crestron App

#210498

Yeah, it works great for feedback for me, but I can't get any presses to work.  I posted about it on Labs and they're looking into it for me.  I have a feeling it's probably only an issue with 2-series and I wouldn't be surprised if it stays that way since 2-series don't fully support Smart Graphics.  It would be nice, but I can deal with just feedback if I have to.

Re: Adding a PYNG hub to an existing Crestron system?

#210497

The pyng triggers I put in my PMC3 program are showing up on the pyng app, now I just need?to move some of my working logic over to test it.???

On Monday, January 18, 2016 8:17 AM, "f douglas cavsfan198023@... [Crestron]" wrote:

Thanks for the info everyone, the videos were very helpful.???I couldn't find the PYNG module in SIMPL because I was looking for it in my AV2 program, modules such as?"pyng" "media player"?and "tv presets" don't even show up once you add a 2 series processor to SIMPL.? Fortunately,? I have a PMC3 in my system and?I can drag the?modules into that system,? once I can trigger an event from my PMC3 to pyng and vice versa,? I want to see what I can do using eisc to get the pyng hub working with (and for) my main 2 series system.

I'm sure I'll never have to use a pyng hub, 2 series, and PMC3 together...I just like playing around with equipment to see what I can make work:)

On Thursday, January 14, 2016 11:32 AM, "kris.k@... [Crestron]" wrote:

?

Essentially treat the pyng system as you would a Smart Media object. ?There are a couple of modules- (Pyng connection Configuration, and CRPC Serial Client Interface) and they connect to the smart object imported from VTproe. ?Other than that, not much to it. ?You don't get a lot of freedom in the GUI design, but the trade-off is the ease of integration. ?It was a pretty simple matter to acquire the tstats I was using, pretty much just like any infinet setup, just through the pyng interface. ?I'm not sure which processors support the pyng hub, but If the modules drop into your program, then it will work.

Re: IOS Today in Crestron App

Joe Vossen

#210496

开云体育

I finally got "something" working here; all I'm using it for right now is to display the average temperature of my house based on all of the thermostats installed. ?Currently, I am only displaying the thermometer icon and "Average: xx". ?I haven't done anything with the "presses" yet.

I'm viewing it more of using it as a "system state at a glance" more than something I would interact with; such as, is the alarm system armed? ?Are all of the doors locked? ?Are all of the lights off?

I'm using a CP3N and the Crestron App is running on an iPhone 5S

Show quoted text

On Jan 18, 2016, at 8:39 AM, Micah Tedeschi mt.crestron@... [Crestron] <Crestron@...> wrote:

Yeah, actually I'm still having some issues on my home AV2. Icons now show up in Notification Center, but pressing doesn't seem to do anything. No "local" feedback on the phone or anything showing up in debugger. Haven't done much more troubleshooting yet, but I'll let you know if I get it working.

On Jan 13, 2016, at 9:38 AM, steve@... [Crestron] <Crestron@...> wrote:

?

Glad to hear that was the issue.? Have you tried this on a 2-series by any chance?? I just loaded it up on my system at home (Pro2) and, while I get feedback for all my line items, pressing the line items isn't being registered.

Re: CEN-RGFWEX on Cresnet and Ethernet

#210495

开云体育

Cue Lincolns talk about the 2.4 spectrum allocation in his house.

?

?

Show quoted text

From: Crestron@... [mailto:Crestron@...]
Sent: Sunday, January 17, 2016 6:52 PM
To: Crestron Yahoo Group
Subject: Re: [Crestron] Re: CEN-RGFWEX on Cresnet and Ethernet

?

A 2nd gateway would be a fairly inexpensive option too.

Geoff

?

On Sun, Jan 17, 2016 at 6:23 PM, Lincoln King-Cliby lincoln@... [Crestron] <Crestron@...> wrote:

?

Steve is correct -- not although "tinkerer" is a bit more friendly than "cheapo" which may be slightly closer to the truth ;) -- if I could justify the cost of replacing the PRO2 with a PRO3 and the CP2E with a CP3 the tinkering would be wholly unnecessary and the question would be moot.

But as those aren't quite available, much less plentiful at the prices I'm willing to pay (e.g. around 1/8 of dealer cost in the case of the PRO3) I'm left going for the ball-o-twine-and-duct-tape ideas...

Initial tests (using the current Pro2 program with a Cresnet EX gateway dropped in) are not promising but at least not catastrophic -- gateway shows up at the proper ID and all of the devices defined in the lighting program continue to work as expected but the MLX3 defined on the PRO2 Cresnet instance of the gateway just plays dead -- no update requests show up in console, no feedback shows up on the remote...

So it seems my evil plot has been foiled by the gateway and I'll just build an EISC over to the CP2E for the MLXes...

Lincoln
--
Lincoln King-Cliby, CTS, DMC-E-4K/T/D
Commercial Market Director
Sr. Systems Architect | Crestron Certified Master Programmer (Gold)
ControlWorks Consulting, LLC
Crestron Services Provider | Biamp Audia Certified | Extron Control Professional

-----Original Message-----
From: Crestron@... [mailto:Crestron@...]
Sent: Sunday, January 17, 2016 1:38 PM
To: Crestron@...
Subject: [Crestron] Re: CEN-RGFWEX on Cresnet and Ethernet

I think you guys are missing what he's asking. Lincoln is a tinkerer who loves to try things that are out of the norm. He's asking if anyone has connected the gateway to one processor via Ethernet and also to a seperate processor via Cresnet (which wouldn't require 2 IP table entries). I'm sure we'll hear back from him soon regarding whether or not it worked :)

------------------------------------
Posted by: steve@...
------------------------------------

Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.

------------------------------------

Yahoo Groups Links

?

Re: IOS Today in Crestron App

#210494

开云体育

Yeah, actually I'm still having some issues on my home AV2. Icons now show up in Notification Center, but pressing doesn't seem to do anything. No "local" feedback on the phone or anything showing up in debugger. Haven't done much more troubleshooting yet, but I'll let you know if I get it working.

Show quoted text

On Jan 13, 2016, at 9:38 AM, steve@... [Crestron] <Crestron@...> wrote:

?

Glad to hear that was the issue.? Have you tried this on a 2-series by any chance?? I just loaded it up on my system at home (Pro2) and, while I get feedback for all my line items, pressing the line items isn't being registered.

Re: Adding a PYNG hub to an existing Crestron system?

#210493

Thanks for the info everyone, the videos were very helpful.???I couldn't find the PYNG module in SIMPL because I was looking for it in my AV2 program, modules such as?"pyng" "media player"?and "tv presets" don't even show up once you add a 2 series processor to SIMPL.? Fortunately,? I have a PMC3 in my system and?I can drag the?modules into that system,? once I can trigger an event from my PMC3 to pyng and vice versa,? I want to see what I can do using eisc to get the pyng hub working with (and for) my main 2 series system.

I'm sure I'll never have to use a pyng hub, 2 series, and PMC3 together...I just like playing around with equipment to see what I can make work:)

On Thursday, January 14, 2016 11:32 AM, "kris.k@... [Crestron]" <Crestron@...> wrote:

Essentially treat the pyng system as you would a Smart Media object. ?There are a couple of modules- (Pyng connection Configuration, and CRPC Serial Client Interface) and they connect to the smart object imported from VTproe. ?Other than that, not much to it. ?You don't get a lot of freedom in the GUI design, but the trade-off is the ease of integration. ?It was a pretty simple matter to acquire the tstats I was using, pretty much just like any infinet setup, just through the pyng interface. ?I'm not sure which processors support the pyng hub, but If the modules drop into your program, then it will work.

Re: New smart graphics update problems

Andrew Welker

#210492

Usually when there is a SG update, the app gets updated as well. Did you check in the app store for an update to the Crestron app?

Show quoted text

On Mon, Jan 18, 2016, 1:11 AM?aziz_s_lok@... [Crestron] <Crestron@...> wrote:

?

I recently updated smart graphics and vtpro which went fine I was able to make changes and upload the graphics to the processor as well as iPad but when I try to connect the Crestron app in iPad it says updating interface and the flips to Crestron logo page with loading and does not go any further...I tried Cretron support but they clearly have no idea about what's happening ...

I tried downgrading my flash player... Updating firmware to the processor ... Also did a clean install on another machine but nothing seems to work.. Although I have graphics compiled on the Older version of the software.. Which works just fine once I upload it ...

Anyone faced the same issue?? Any clue ??

Aziz

Re: Samsung ME series and WOL

[email protected]

#210491

Hi Ajish,

Can you please share the?Virtual remote commands with us. i required the same to control below mentioned SAMSUNG product.

JU6000
JU6400
JU6600
JU7000

JS9000

Thanks?

Ronit ?

?