¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Messages
Expanded Topics Messages Polls
Date
Re: Samsung UN75F6300

 

How do you go about "teaching" the Samsung TVs the CEC commands to follow? Cannot find documentation on this process anywhere, and I do not see AnyNet+ anywhere in the menu. All other Samsung simply used the Generic CEC Display Control module and worked just fine. Now I have a bunch of model UN50EH5300FXZA and none of them will respond to CEC at all.
Re: Christie digital dwu600-g protocols

 

Contact Christie support, they'll send you the protocol.? I don't know why they don't have them all online -- most, but not all.? It's probably either the (PWR1) or the \xBE\xEF protocol, but I'm not sure for that model.


On Fri, Sep 5, 2014 at 8:24 AM, cheinemann@... [Crestron] <Crestron@...> wrote:
?

Has anyone out there worked with the Christie dwu600-g? I have looked everywhere but cannot find an api for this unit. Does it use the same protocol as another popular device by Christie? Any input is appreciated. Thanks in advance.




--
Jeremy Weatherford

Re: AV (and Crestron) equipment sale today and tomorrow

Paul Walczak
 

Importantly, the address:

638 Busse Highway
Park Ridge, IL 60068

Park in back if you want.


On Fri, Sep 5, 2014 at 10:53 AM, Paul Walczak <paul@...> wrote:
Hi all -?

We have moved our office to Northbrook, IL ?and have a lot of old equipment I don't want to move with us.

There are lots of customer trade-in amps, speakers, networking gear, etc, but for this group may be most interested in the Crestron stuff, which I'll list below.

For people not in the Chicago area, if you are interested in something let me know and if it doesn't sell I'd be willing to ship it.

The sale is:
9/5/14 (Today) from 2pm to 7pm?
9/6/14 (Tomorrow) from noon to 3pm.

Most stuff works and was demo, trade-in, or otherwise accumulated. ?Plenty of space for testing before you buy if you want.

Semi-accurate list
RFGW-433
CLW-DIM1RFW-S
ST-1700 (2)
STX-1700CXP
TPS-RFGWX
TPS-1700
APAD
LC-1000s (5)
PAD8 (2)
AMS-AIP
TPS-12?
C2N-TXM
C2N-TAMWX
ST-COM
CEN-TVAV
ST-PC
ST-CS

And for the brave,
Prodigy remote
Prodigy processor
Prodigy TSTAT





--
Paul Walczak
Ensemble Custom Solutions, Inc.
847-298-2600

___________________________________________________________________________

Hey, you can now !

For fastest response, please email "service@..." with any?service requests.
AV (and Crestron) equipment sale today and tomorrow

Paul Walczak
 

Hi all -?

We have moved our office to Northbrook, IL ?and have a lot of old equipment I don't want to move with us.

There are lots of customer trade-in amps, speakers, networking gear, etc, but for this group may be most interested in the Crestron stuff, which I'll list below.

For people not in the Chicago area, if you are interested in something let me know and if it doesn't sell I'd be willing to ship it.

The sale is:
9/5/14 (Today) from 2pm to 7pm?
9/6/14 (Tomorrow) from noon to 3pm.

Most stuff works and was demo, trade-in, or otherwise accumulated. ?Plenty of space for testing before you buy if you want.

Semi-accurate list
RFGW-433
CLW-DIM1RFW-S
ST-1700 (2)
STX-1700CXP
TPS-RFGWX
TPS-1700
APAD
LC-1000s (5)
PAD8 (2)
AMS-AIP
TPS-12?
C2N-TXM
C2N-TAMWX
ST-COM
CEN-TVAV
ST-PC
ST-CS

And for the brave,
Prodigy remote
Prodigy processor
Prodigy TSTAT
Re: HTT_B10EX

Heath Volmer
 

¿ªÔÆÌåÓý

They normally do work quickly, but every now and then they go into "full-blink" mode for 15-60 seconds as the reacquaint themselves with the job they are supposed to be doing.

Wifi, EX are all carefully staggered around this project. I've move the gateway several times. When they're on, they're on, but occasionally...

Thanks, Heath


On Sep 4, 2014, at 10:22 PM, jaredlross@... [Crestron] <Crestron@...> wrote:

I have used the traditional Infinet version on my night stands at home for years as well as on many installations. The response time is pretty instant. If I try to dim the lamp from being off while the keypad is asleep, it takes less than a second to respond and once it does it then works instantly.


I have found that the direction of the antenna has a significant effect on the ?signal strength and responsiveness.?

I had one that was slow with the antenna in the attic?. Without changing the location of the gateway or bedroom, I simply pointed it towards the room and it worked perfectly.

If aiming the antenna doesn't work, I'd hook it up as close to the room as you can as a test to see if it's a signal issue.?

You may also want to check that your channels for this, EX, and WIFI are balanced.

These keypads are one of my favorite parts of my system and a few second ?delay would drive me nuts. I'm sure they can be made to work quickly.?


Sent from my BlackBerry 10
Re: Controlling a device by USB HID with Crestron, any conversion box known?

 

This sounds like a job for a CNMK

?
Controlling a device by USB HID with Crestron, any conversion box known?

 

Hi,


I am wondering if there is a conversion Box for controlling a device by USB HID. At the moment

it would be a Synology VS240HD (survaillance videostation) and it is only controlable with USB

HID (keyboard and mouse).


I am wondering if there is a conversion box with network and/or rs-232 connection, which offers

the possibility to send commands to that box, and this sends it to the device by USB HID.

It should be a keyboard and if possible mouse emulator, so no keyboard/mouse is needed.


Does anybody know such a conversion box?


regards, Stefan
Re: Sharp CEC

Michael F. Kisser
 

¿ªÔÆÌåÓý

We use Sharp Commercial Displays and LG commercial model displays as well. I have not heard this on that side of the house yet.

?

From: Crestron@... [mailto:Crestron@...]
Sent: Friday, September 05, 2014 11:01 AM
To: Crestron@...
Subject: [Crestron] Re: Sharp CEC

?

?

I believe one of our engineers stated that all new Sharp consumer displays 50" and under will not have RS-232 or VGA anymore. What a shame. If you happen to get a new model 60" and up, you will be happy to have serial control. Thought about getting better control options since this has come to light. Since our business uses more than Crestron CS, need to know what will work 100% of the time. IR is always an option, but would put that control type on the bottom of the list. I swear I didn't even see LAN ports on those models either, WiFi only. Sharp is cheeping out. CEC seems like a viable solution for any DM install whihc most of mine are. but what about when its a hang and bang with a keypad. Is the Service USB capable of receiving RS-232 commands?

?

cyberbri
Re: Sharp CEC

Michael F. Kisser
 

¿ªÔÆÌåÓý

I have never used CEC commands are they reliable ?

?

From: Crestron@... [mailto:Crestron@...]
Sent: Friday, September 05, 2014 11:08 AM
To: Crestron@...
Subject: [Crestron] Re: Sharp CEC

?

?

I saw the same bulletin about Sharp getting rid of the RS-232 ports.?
Re: DMPS-100-C no Source Audio control

[email protected]
 

Good intel. I always init the left out right and right out left to -800db. Now if you want to only use 1 8ohm speaker, then you need to use one of those.
Re: Sharp CEC

 

I saw the same bulletin about Sharp getting rid of the RS-232 ports.?
Re: Sharp CEC

[email protected]
 

I believe one of our engineers stated that all new Sharp consumer displays 50" and under will not have RS-232 or VGA anymore. What a shame. If you happen to get a new model 60" and up, you will be happy to have serial control. Thought about getting better control options since this has come to light. Since our business uses more than Crestron CS, need to know what will work 100% of the time. IR is always an option, but would put that control type on the bottom of the list. I swear I didn't even see LAN ports on those models either, WiFi only. Sharp is cheeping out. CEC seems like a viable solution for any DM install whihc most of mine are. but what about when its a hang and bang with a keypad. Is the Service USB capable of receiving RS-232 commands?

cyberbri
Re: usb-ext-dm lan communication

 

I wish they had the ability to configure the ip and ?subnet. There doesn't seem to be much you can do other than hope they work. It's a dm unit, but dm tools didn't find it.

Sent from my BlackBerry 10 smartphone on the Bell network.
From: Martin Kupferman martin@... [Crestron]
Sent: Thursday, September 4, 2014 8:37 PM
To: Crestron@...
Reply To: Crestron@...
Subject: Re: [Crestron] usb-ext-dm lan communication

?

I was actually reading up the help file for this yesterday, both of the USB-EXT¡¯s have to be on the same subnet, this will not go through routers, since its a Layer 2 device only. I would check if you have them running through two different subnets.

From: "koguntke@... [Crestron]" <Crestron@...>
Reply-To: <Crestron@...>
Date: Thursday, September 4, 2014 at 12:35 PM
To: <Crestron@...>
Subject: [Crestron] usb-ext-dm lan communication

?

I have a system with a Microsoft ppi board and 2 local pc's. The problem is that I cannot get the Crestron USB-EXT-DM's to pair over the network. I can connect them directly together as an extender, but as soon as I hook them through the dhcp router, nothing. I have used the module in simple windows and addressed the local unit in the pairing section..... nothing. Any hints or input would be appreciated.


Re: Spam: Re: CHV-THSTAT

Michael F. Kisser
 

¿ªÔÆÌåÓý

Matt,

?

Thanks so much for the input. I will look at the Crestron module and try that. The home world is new to me but also interesting. I got my CEN-RFGW-EX yesterday. Yale door looks are coming in a few weeks. I am also going to be using Crestron PRO2 to control my model railroad and have the signal system function just like the real railroads do.

?

I have been programing for the past 3 years and under supervision of a great programmer and I am now taking the voyage to get certified as well. Past my P201 entrance exam and waiting on two others to sign up so will have a class in Chicago in a few weeks. I am looking forward to getting more verse on Crestron programing. I have done some very cool entire wings of buildings and had a great time setting them up.

?

I have been collecting hardware from customer upgrades. Got a few TPS-6X¡¯s and TPS-6L¡¯s and ST-PC boxes and a few other items over the past two years. There not the newest but they look great and work J .

?

Sorry for getting a bit off topic,

?

Mike

?

From: Crestron@... [mailto:Crestron@...]
Sent: Friday, September 05, 2014 7:06 AM
To: Crestron@...
Subject: Spam: [Crestron] Re: CHV-THSTAT

?

?

1. Outdoor Temp + Humidity?

?

Depending on how close you want the readings to be, you can also just use the values from Crestron's free weather module based on your zip code to feed outdoor temp and humidity into the system/tstats.

?

2. Garage door:

?

What is the input? Visor controller integrated into the car already? Or touchpanel/iphone?

?

Typically that is a simple contact closure (ie just like the button on your wall in garage) between your system and the garage door motor interface.

?

Another option we use is the Lutron VCX visor controller to drive the unit directly or to relay the closures into a crestron processor if we are doing hybrid control (ie both visor controller and iphones/TP's need control).

?

HTH,

Matt

?

?
Christie digital dwu600-g protocols

 

Has anyone out there worked with the Christie dwu600-g? I have looked everywhere but cannot find an api for this unit. Does it use the same protocol as another popular device by Christie? Any input is appreciated. Thanks in advance.
Re: Duplicate Extenders when Refresh Smart Graphics

 

this wasn't the problem i have
iPad project existed
just made some edits

?mark
Toolbox Error Message: CNet ID 03. No parent address specified.

 

Dear All,


Having an issue with Toolbox.? Two different machines, Desktop (Win7 Pro) and Laptop (XP SP3)

and when creating a new entry in the Address Book I receive this error message and cannot create

a new address.


"The following entries have invalid address.

Please correct or remove before selection OK:


Remote Console to CNet ID 03:? No parent address specified."


Anyone know how to fix this.? I have used Add/Remove programs and reinstalled Toolbox (TB suggestion)

but no dice.


Thanks in advance for your assistance.


Ross Cook

The Sound Room
Re: CHV-THSTAT

 

1. Outdoor Temp + Humidity?

Depending on how close you want the readings to be, you can also just use the values from Crestron's free weather module based on your zip code to feed outdoor temp and humidity into the system/tstats.

2. Garage door:

What is the input? Visor controller integrated into the car already? Or touchpanel/iphone?

Typically that is a simple contact closure (ie just like the button on your wall in garage) between your system and the garage door motor interface.

Another option we use is the Lutron VCX visor controller to drive the unit directly or to relay the closures into a crestron processor if we are doing hybrid control (ie both visor controller and iphones/TP's need control).

HTH,
Matt
Re: Computer Monitor as TV

 

I do that with my retina Macbook when remoting into other computers with 1080p displays. It's the small things in life.

Chris

On Sep 5, 2014 12:30 AM, "Neil Dorin neildorin@... [Crestron]" <Crestron@...> wrote:

?

I have that BenQ as my lo-res desk monitor at home. Works great and I watch TV on it sometimes.?

Now that I have my 28" Samsung UHD 4K monitor I mostly put the TV in the corner as a PIP source. It's pretty sweet having your PIP source display at 1:1 resolution and only take up 1/4 of the screen :)


On Sep 4, 2014, at 10:25 PM, "Chris Niles chris.niles.crestron@... [Crestron]" <Crestron@...> wrote:

?

Supposedly these are really good.

Chris

On Sep 4, 2014 11:46 AM, "chris.anello@... [Crestron]" <Crestron@...> wrote:
?

Have an opening that needs 27-30" Display, and there are no 1080p TVs out there in this size anymore.

We have used Computer monitors before, and with DM where the signal sensing turns the display on to that input. Can no longer get that model, so looking for solution.

we can do a relay to control power, but with the inputs available on some of these models, is there a consistent way to make sure it goes to the HDMI that we need it to?


Anybody have any options/solutions?


thanks
Re: Computer Monitor as TV

 

¿ªÔÆÌåÓý

I have that BenQ as my lo-res desk monitor at home. Works great and I watch TV on it sometimes.?

Now that I have my 28" Samsung UHD 4K monitor I mostly put the TV in the corner as a PIP source. It's pretty sweet having your PIP source display at 1:1 resolution and only take up 1/4 of the screen :)


On Sep 4, 2014, at 10:25 PM, "Chris Niles chris.niles.crestron@... [Crestron]" <Crestron@...> wrote:

?

Supposedly these are really good.

Chris

On Sep 4, 2014 11:46 AM, "chris.anello@... [Crestron]" <Crestron@...> wrote:
?

Have an opening that needs 27-30" Display, and there are no 1080p TVs out there in this size anymore.

We have used Computer monitors before, and with DM where the signal sensing turns the display on to that input. Can no longer get that model, so looking for solution.

we can do a relay to control power, but with the inputs available on some of these models, is there a consistent way to make sure it goes to the HDMI that we need it to?


Anybody have any options/solutions?


thanks
58361 - 58380 of 256265