开云体育

On Fri, Aug 16, 2013 at 9:01 AM, Neil Dorin <neildorin@...> wrote:

Yeah, client doesn't want to wait a few months. The primary sources for
preview are just Vaddio HD cameras so no HDCP.


On Fri, Aug 16, 2013 at 8:28 AM, Paul Cunningham <paul.cunningham@...

wrote:

**


As long as none of the preview sources are HDCP-encrypted and you can
wait for a few months, you might be able to use Crestron's forthcoming
DMCO-7 output card; they're supposed to have all the info at CEDIA


-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On
Behalf Of Neil Dorin
Sent: Thursday, August 15, 2013 10:01 PM
To: Crestron@...
Subject: [Crestron] 1080p h.264 preview on TSW-1050

Anyone tried this yet? What encoders work?

I'm going to try it tomorrow with the RSTP stream off a capture HD just
to see if it works but I have a client that needs 3 HDMI outputs off a
DM-MD32x32 encoded to use as previews on TSW-1050s and an MJPEG on the new
Crestron iPad app.

Sent from my iPhone

------------------------------------




Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
Yahoo!
Groups Links

--- In Crestron@..., Neil Dorin <neildorin@...> wrote:

So the HD5K I2P module powers the projector on an off but I'm getting error
responses to most of the queries from the module:

(00000 00000 ERR00101 "LPH: Control Not Found")
(00000 00000 PWR!010 "Cooling down")

The module is obviously close. Can anyone point me in the direction of a
better suited module for a Christie HD6KM? Onsite and not much time to go
digging for myself today.


On Thu, Aug 15, 2013 at 8:58 PM, Neil Dorin <neildorin@...> wrote:

Does anyone know what module might work for an HD6K. I downloaded the HD5k
module from the I2P site today but the techs haven run the rs232 from the
DM-RMC-SCALER-C yet so I haven't been able to try it.

Don't come across many Christie's lately and I know often a Sanyo it
hitachi module will work.

Just seeing if anyone has any tips to save me some time tomorrow.

Sent from my iPhone

[Non-text portions of this message have been removed]

--- In Crestron@..., Jesus Tossas <audioandnetartist@...> wrote:

Am using this for about 5 years





Jesus Tossas

787-329-3944

Audio Engineer | Crestron Programer

[Non-text portions of this message have been removed]

--- In Crestron@..., Phil Bridges <gravityhammer@...> wrote:

I've been having it on a CP3N. I know there are some serial control
modules that can cause this on the 3-series, but I'm not using any serial
control in this situation.

What do your PLogs say?


On Fri, Aug 16, 2013 at 10:04 AM, Pleasant Bud <mbuddycoughlin2002@...

wrote:

**


I guess the subject line sums it up. I can't find anything in the program
that says "Reboot" and nothing external in killing power.
Last reboot message "HW Watchdog Timeout". I've been in touch with TB on
this but no answers yet.
Anyone else experiencing this sort of behavior?

--- In Crestron@..., "Mark" <markrkaye@...> wrote:

i have a large system w/30 tp's (750, 1050 & tst-600) that i am just commissioning
i am not impressed with the media object performance
when i pick a tuner i.e. am/fm/xm/audionet it takes 15-20 sec to get screen control (audio plays immediately)
sometimes i get the 'no communication' box
is this normal?

i have an AV3 with a large main program & a large lighting & shades program (pac2 does the actual control)
it takes 10 min after a reboot to get reasonable control again
i had all the devices on the house LAN (sonicwall & hp switches, so not your ordinary stuff)
i moved all the Crestron devices to the control subnet yesterday and things appear worse?
wondering if i have a bad LAN cable causing extra traffic?
i am testing with an XPanel of a 750 on the LAN side

mark

--- In Crestron@..., "Audible Solutions" <crestronprogrammer.1@...> wrote:

Much smaller job--only 12 panels--and I was using the MMS and iPad for testing. But I found the media object to be very fast. My only objection was that it defaulted to the original Autonomic GUI with browse objects. But I had no speed issues. I have seen network issues effect performance. I added iPod control in the shop just for testing and found it to be fast as well.

I have seen network infrastructure issues seriously impact network performance. Has you network been tested for performance?

--- In Crestron@..., "Mark" <markrkaye@> wrote:

i have a large system w/30 tp's (750, 1050 & tst-600) that i am just commissioning
i am not impressed with the media object performance
when i pick a tuner i.e. am/fm/xm/audionet it takes 15-20 sec to get screen control (audio plays immediately)
sometimes i get the 'no communication' box
is this normal?

i have an AV3 with a large main program & a large lighting & shades program (pac2 does the actual control)
it takes 10 min after a reboot to get reasonable control again
i had all the devices on the house LAN (sonicwall & hp switches, so not your ordinary stuff)
i moved all the Crestron devices to the control subnet yesterday and things appear worse?
wondering if i have a bad LAN cable causing extra traffic?
i am testing with an XPanel of a 750 on the LAN side

mark

On Thu, Aug 15, 2013 at 8:58 PM, Neil Dorin <neildorin@...> wrote:

Does anyone know what module might work for an HD6K. I downloaded the HD5k
module from the I2P site today but the techs haven run the rs232 from the
DM-RMC-SCALER-C yet so I haven't been able to try it.

Don't come across many Christie's lately and I know often a Sanyo it
hitachi module will work.

Just seeing if anyone has any tips to save me some time tomorrow.

Sent from my iPhone

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of Neil Dorin
Sent: Thursday, August 15, 2013 10:01 PM
To: Crestron@...
Subject: [Crestron] 1080p h.264 preview on TSW-1050

Anyone tried this yet? What encoders work?

I'm going to try it tomorrow with the RSTP stream off a capture HD just to see if it works but I have a client that needs 3 HDMI outputs off a DM-MD32x32 encoded to use as previews on TSW-1050s and an MJPEG on the new Crestron iPad app.
------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of happynwestwood
Sent: Thursday, August 15, 2013 8:41 PM
To: Crestron@...
Subject: [Crestron] 3rd party alternative to Crestron Fiber

We have a project where we are running Fiber approx. 500ft, most of it through conduit for Crestron Sonnex applications and network. Not being used for DM yet, but want to insure it's to spec if it ever happens.
I don't trust the conduit being used to stay completely dry. Over time some water could leak into it. Therefore we aren't comfortable using the Crestron Fiber which isn't designed for trenched conduit applications.

The other issue is Crestron brand only comes in 4 strand and our conduit space is limited. I want to have at least 8-12 strands in there for future use, and running 3 of them, even if it was waterproof won't leave enough room for other needs.

So I have been looking for a 12 strand weatherproof bulk fiber option and having a hell of a time. To be sure, there is a ton of it out there. But as soon as I send them the spec on Crestron's Fiber (including the tested to 1550nm rating), all of these re-sellers disappear and I can't get a response.

Does anyone on here successfully use a brand and type for DM applications that is outdoor/waterproof and 8-12 strand in the same spec as Crestron's Fiber? I am looking for a solution and having a hard time finding someone that can provide what we need.

I also considered as a last resort, of running an indoor variety inside of an armored waterproof jacket inside the conduit. Unfortunately that takes up a ton of space again, much more than a bare wire would. Not to mention pulling a 3/4" fat jacket through a 2" conduit would be entertaining and not leave much room.

Any direction or recommendations would be appreciated. Anyone here use 12 strand outdoor fiber for DM with great success? Thanks!

-Ilya



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links

--- In Crestron@..., "Mark" <markrkaye@...> wrote:

i have a large system w/30 tp's (750, 1050 & tst-600) that i am just commissioning
i am not impressed with the media object performance
when i pick a tuner i.e. am/fm/xm/audionet it takes 15-20 sec to get screen control (audio plays immediately)
sometimes i get the 'no communication' box
is this normal?

i have an AV3 with a large main program & a large lighting & shades program (pac2 does the actual control)
it takes 10 min after a reboot to get reasonable control again
i had all the devices on the house LAN (sonicwall & hp switches, so not your ordinary stuff)
i moved all the Crestron devices to the control subnet yesterday and things appear worse?
wondering if i have a bad LAN cable causing extra traffic?
i am testing with an XPanel of a 750 on the LAN side

mark

--- In Crestron@..., Lincoln King-Cliby <lincoln@...> wrote:

Or have a very frank conversation about how cutting down on the number of type of UIs will reduce the upfront programming cost, total cost of ownership (through adds/changes in the future) and deployment time.

It's actually a really easy conversation to have and one I've had many times along the lines of "The cost savings from eliminating having to build and create submittals for the TPMC-3SMs will more than outweigh the cost difference of replacing the TMPC-3SMs with TPMC-4SMs"

Lincoln

--
Lincoln King-Cliby, CTS
Commercial Market Director
Sr. Systems Architect | Crestron Certified Master Programmer (Silver)
ControlWorks Consulting, LLC
Crestron Services Provider


-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of Jeremy Weatherford
Sent: Friday, August 16, 2013 7:41 AM
To: Crestron
Subject: Re: [Crestron] OT: Large project, lost of different touch panels

Time to change integrators...


On Fri, Aug 16, 2013 at 6:28 AM, Etienne <etienne@...>wrote:

Hi,

I'd like some advice. I have a project where the integrator has specified
a couple of different touch panels; V12, TST-600, MTX-3, TPMC-4SMD,
TPMC-3SMD.

I suggested we change the TST-600's for TPS-6X's so that I don't have to
program anything in Smart Graphics (Core 3).

It is actually a VERY simple residential system with lots of touch panels.

Any comments?

Thanks!



------------------------------------




Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
Yahoo!
Groups Links

--
Jeremy Weatherford


[Non-text portions of this message have been removed]



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links

--- In Crestron@..., "Chip" <cfm@...> wrote:

FWIW, I wound up getting an OGIO Renegade backpack and just finished transferring the contents of my "seriously, it's about to disintigrate" laptop bag to it.

Thought it was going to be a bit bigger, but I did manage to find a home for everything. I like having the crush-proof compartment at the top to keep my headphones in - real nice perk.

I only wish the laptop compartment had a divider, 'cos that would have been the perfect place for documents. I put 'em in the large compartment directly opposite the laptop - which was also the prime candidate for the cable collection. Hopefully I won't have issues fishing paperwork out from underneath the cables. When I get my new laptop, I might try to see if I can use a sleeve for it and move the documents over into the laptop section...

Baptism by fire tomorrow AM as it treks into NYC with me...

- Chip


--- In Crestron@..., "Chip" <cfm@> wrote:

I have mine from masters, but I think I gave it to my wife - seem to recall it didn't have enough structure or compartments or somesuch...

But thanks for all of the suggestions, everyone. I think I'll be spending part of this weekend comparing the features of all of these.

- Chip


--- In Crestron@..., Jeremy Weatherford <jweather@> wrote:

Agreed, love my Ogio:
Fits
my 17" HP and everything else. Crestron was handing out 15" versions of
these two years ago at masters, haven't used that one because I don't have
any laptops that fit in it. :(


On Fri, Jun 21, 2013 at 12:59 AM, Trey Chamrad - Hometunes <
trey@> wrote:

only way to go IMO







-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf
Of Steve Kaudle
Sent: Thursday, June 20, 2013 11:56 PM
To: Crestron@...
Subject: Re: [Crestron] OT: Laptop Bags?



I use an Osprey Flap Jack messenger bag. Works great, fits my mammoth HP

laptop, separate tablet sleeve, plenty of room for extras, sits comfortably

hanging on my shoulder or slung across my back. There's a backpack version

as well. Don't let the odd strap color combos in the pictures turn you

off...it comes with multiple color options for the hold downs. I'm fairly

picky about laptop bags, but have happily used one of these things for the

last 3-4 years. The grey is a bit darker than the pictures suggest...after

seeing that color in person, I wish that's what I had bought (I've got the

blue one as well as an older orange model).









On Friday, June 21, 2013, Chip wrote:

**

My current laptop bag (Targus) is starting to come apart at the seams

after much abuse on my part. Not sure if I should be considering other

makes for a replacement.

The list of "must haves" for a bag are...

- compartment for a laptop. I know that's a "duh", but if I don't say it,

others will call me on it.

- compartment - even larger than the laptop compartment - for cables,

power supply, bigger tools/gadgets.

- smaller compartment/pouch for tweakers and other smaller tools/gadgets

that would get lost in the big compartment.

- a large, flat pocket area - preferably with at least on partition - for

drawings & paperwork that shouldn't come out curled or crumpled...

Anyone have a bag or backpack that's laid out like this that they're

happy

with?

Thanks,

- Chip

[Non-text portions of this message have been removed]







------------------------------------




*
****



Check out the Files area for useful modules, documents, and drivers.



A contact list of Crestron dealers and programmers can be found in the
Database area.


*
****Yahoo! Groups Links







Individual Email | Traditional





(Yahoo! ID required)



Crestron-digest@...

Crestron-fullfeatured@...



Crestron-unsubscribe@...











------------------------------------




Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
Yahoo!
Groups Links

--
Jeremy Weatherford

On 2013-08-16, at 7:14 AM, Morrisey Bush <morrisey.bush@...> wrote:

Hi Chip!

Thanks for the reply. I Make do this.
I'll make do this!

I use the port 41795, right?

[Non-text portions of this message have been removed]

--- In Crestron@..., "fritzwwthomas" <fritzwwthomas@...> wrote:

I noticed that if I didn't poll the system constantly and only polled for status when a user pressed the hvac button (which was the poll status trigger), it has worked flawlessly in two larger installs that I did. I made a screen pop up that told the user to wait until the poll was complete - about 7 - 10 seconds.If you are putting a 1 on the poll enable I'd bet that's causing the failure. The module didn't seem to hold up for constant accurate feedback if left high at all times.

--- In Crestron@..., "Jeff" <jeff@> wrote:

Hi,
I'm using the Carrier Infinity module from Crestron (v2), and I'm having
one heck of a time with it. I thought I'd reach out to this group for
ideas.
Fundamental problem: The module works for a while, then stops querying
the HVAC system for information. This can happen in a few hours after
boot, or as long as a few days. But eventually, it happens. The
obvious result is that displayed data becomes stale.
When this occurs, if I do something to change the state of the system
(put a zone in HOLD mode, say), then the module will start communicating
again. Until it stops again at some later time.
Things I have tried to resolve this:
1. First occurred on PRO2. Upgraded to PRO3, no change.
2. Modified code to run in separate "slot" of PRO3 (as a separate
program). No change.
3. Put the code on a QM-RMC running older (v3) firmware. No change.
4. Went to Carrier to report the problem, they said Crestron supports
the module.

Worked with Crestron. This is ongoing, no solution (yet). I did get a
BETA version (v2.3, not on the WWW site yet), but this occurs as well.
I believe Crestron verified that they can replicate the problem, but
there is no solution as of yet.
I did recently upgrade to the Infinity Touch control, which (presumably)
allows me to use the Crestron Infinity Touch module (although, with the
same SAM board, the old module works perfectly). I can try that if
folks are having better luck with that.
Any suggestions would be appreciated. Thanks so much!
/Jeff


[Non-text portions of this message have been removed]