¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Messages
Expanded Topics Messages Polls
Date
Re: Using iTunes Match to sync iPod when docked

 

I wanted to follow-up on this topic and share a little snag I ran into with this approach...

The CEN-IDOC or CEN-ISERVER will not "see" the music as being on the iPod until it has been downloaded.

So, after enabling iTunes Match on a clean iPod you will see the entire library show up on the iPod if you are manipulating it manually, and the songs will all have the download button next to them, as Dustin described. If you dock that iPod into the Crestron dock, and browse for music through the Crestron interface, you will not see any content available.

If you take it off the dock and start a song playing manually, and let that song download to the device, then dock it again, you will see that one song only now through the Crestron interface.

Needless to say, this is not very useful from our point of view.

If you *purchase* new music through iTunes, and have music downloads enabled on the iPod, it should actually download the new content completely and be available through the dock, but I haven't tested this myself.

I also haven't tested what happens when you have a list of songs from an album that is in the process of downloading to the device being displayed on the Crestron interface. Does it shift the lines down to make room for the new songs, or does the Crestron interface now out of sync with what's on the actual device? I guess the same is true if you start messing with playlists in iTunes, will the changes be properly displayed on the Crestron interface, or do you have to go back to the Home menu and drill in again before it sees the updated list of songs/playlists.

Oh, and one more thing I learned the hard way:

If you activate iTunes Match for an iOS device under an iTunes account, that device is locked to that iTunes Match account for 90 days. Even if you wipe the iOS device back to factory defaults, the association between the device and the iTunes Match account exists on Apple's servers still, and it won't let you log into iTunes Match with a different account.

That's the last time I use my own account for testing iTunes Match on a new iPod that was purchased for the client...

--- In Crestron@..., "Dustin" <dustin@...> wrote:

You do not have to trigger the download with the download button. When you select a song that has not yet been downloaded to an iTunes match device, it buffers slightly, then begins playing. It then downloads completely during playback and is saved on the device. Even if you skip the song, once the download starts, it will finish.

The downside of this is that in a large, manually managed music collection, the device can fill up quickly. Also, if there are lots of songs added at one time, the delay in playback and download accumulates if you get going too fast with it. If you skip thru 15 songs that are all new looking for "that one you can't remember the title of", you now have 15 downloads in progress in the background. Each one will take a little longer to start playing because the buffer speed is slower. It'll speed back up as they complete, but in a situation where you can't see the download status, it might seem like it's stuck or broken.

I use the method for myself, but haven't yet deployed it for a customer. I do have issues with match on my computers - frequently prompting me to sign out and sign back in because "match service encountered an error", however the idevices have never missed a beat.

--- In Crestron@..., Marc-Etienne Huneau <mehuneau@> wrote:

But you'd have to manually trigger the downloads.

--
Marc-Etienne HUNEAU

??? 06.615.516.90


Le 24 f??vr. 2012 ?? 04:26, "floyd1212" <floyd1212@> a ??crit :

Yes, it is using the iCloud service, but with an iTunes Match subscription (at $25/yr) it should also sync ripped music and playlists, not just purchases. Or so I have been told.

-David

--- In Crestron@..., Neil Dorin <neildorin@> wrote:

I think you mean iCloud purchase syncing rather than iTunes Match.

I have a retired iPhone 4 that serves as my iPod in my CEN-IDOCV at home. This works perfectly for any purchases made on any of my other iCloud devices (iPhone 4, iPad 2, iTunes on PC)

-Neil Dorin

Sent from my iPad

On Feb 23, 2012, at 11:38 AM, "floyd1212" <floyd1212@> wrote:

Has anyone tried using an iPod Touch running iOS5, with the iTunes Match service turned on, with a CEN-IDOCV or CEN-ISERVER?

I'm hoping that the iPod will stay "awake" and connected over wifi to be able to have new purchases and playlists pushed automatically from iTunes, instead of relying on Crestron Sync, which is still a multi-step, user-initiated process (and buggy on a Mac).

Is there a way to make it truly automatic so that there aren't any pop-up messages the user has to click "OK" to get past, etc?

Thanks!




[Non-text portions of this message have been removed]
UK - 3G connection on O2 crashes Crestron Mobile

 

Anybody else in the UK seeing this?

Since earlier this week we're seeing previously working Crestron Mobile projects on O2 iPhones crashing back to the iOS main screen after connecting and downloading the manifest when connecting via 3G, but working fine on WiFi.

The same projects are working fine on 3G on T-Mobile or Vodafone.

Mark
Re: Controllable Sonos style iTunes media player

 

Will the MMS-2 see the new content "as soon as they add an audio file in iTunes by any method?" Or do you have to tell the MMS-2 to re-index the library before it will see the new content?

Just as an FYI, you have to re-index the library on the Sonos before it will see the new content as well. This can be triggered manually through the Sonos interface, or can be setup to happen on a fixed schedule.

--- In Crestron@..., "wretaudio" <wretaudio@...> wrote:

I am a little wary of the AppleTV route incase of a firmware update that kills the control functionality. If I need their MMS-2 box to make this work reliably, then that's fine.

--- In Crestron@..., "Ted" <ted_brincka@> wrote:

The Autonomics MMS-2 or their Apple TV module to control iTunes right from a PC.

--- In Crestron@..., "wretaudio" <wretaudio@> wrote:

Basically a hardware device that can go through a network to find and play music files in an iTunes library. Sonos player can do this, but they do not have any control features. I need to design a system for a cutover that as soon as they add an audio file in iTunes by any method, it is available to be played for a player that is controllable from a Crestron touch panel.

Thanks again for your help.

--- In Crestron@..., "Paul Cunningham" <paul.cunningham@> wrote:

I'm not sure what you mean by "Sonos style" but the Autonomic MMS-2
sounds about right.

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On
Behalf Of wretaudio
Sent: Thursday, March 29, 2012 8:19 AM
To: Crestron@...
Subject: [Crestron] Controllable Sonos style iTunes media player

Is there a Sonos style player out there that can play iTunes music files
that is RS-232 or IP controllable? All I need is to be able to play
audio files in one zone or area of a building.

Thanks.



------------------------------------

**
***

Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
**
***Yahoo! Groups Links
Re: Comcast (Motorola) cable box & HD-DA-2?

mrmondegreen
 

To clarify... is the HD-DA-2 a viable way to connect two TVs to one Comcast (Motorola) cable box? Or will I end up with an HDCP error as if I had used a non-DM HDMI switch?

CW

--- In Crestron@..., "mrmondegreen" <mrmondegreen@...> wrote:

Does the HD-DA-2 'manage' the HDCP keys in the same way DM does, particularly as it concerns connecting two TVs to one Motorola cable box? Anyone tried this successfully/unsuccessfully?

Thanks,
Chris W.
Re: I'm Loosing It...

 

Apologies for bumping an old thread, hopefully my experience can help someone else.

i had a similar problem with an RTI, CNRFGWA and Pro2. Worked fine for a long time, then 2 days ago, all 3 CNRFGWA lights on, all the time. Swapped another CNRFGWA, same problem, all lights on.

Checked code, cabling...

Nothing I tried fixed the problem.

I remembered I also had FOB troubles with my car alarm that afternoon, which suggested interference of some sort.

Unfortunately, returning home the next day, the car alarm FOB worked fine, and the CNRFGWA activity LED was off.

The system worked exactly as it had before the problem arose.

I figure one of the neighbours has a ham radio or something like that, and its just flooding the 433mhz band and the CNRFGWA is picking up on it and freaking out.

Ill update this if it happens again, and I can figure out the source of interference.

(as a note, i live in a big house on a big section in the burbs, its not an inner city apartment)

Dan.

--- In Crestron@..., Simon Cope <sjcope@...> wrote:

Yup. Your gateway is screwed. I used to see this reasonably frequently a
few years back - you'll need to send the GW back for repair/replacement.

Simon C

2010/1/21 Lincoln King-Cliby <lincoln@...>



My system at home: I replaced a C2N-CBD with a CNX-BF12. Existing wire,
didn't even change the Phoenix connectors. Now all of a sudden the
ML-500/600s on the CNRFGWA-418 stop chatting.

Disconnect CNX-BF12 Cresnet at the CNT-BLOCK end of the cable... no change.
Even with an ML-500 at 6", 18", and 3'.

Take antenna off CNRFGWA-418 and the ML-500 works within about 3' of the
gateway. Put antenna back on, goes back to not working.

An interesting observation is that the "SIGNAL" LED on the 433 CNRFGWA
right next to the -418 is clearly illuminated with I hit any button; the
"SIGNAL" LED on the -418 only flashes when I take the antenna off or
physically touch the ML-500 to the -418's antenna (in that case, though,
even though the signal usually LED comes on nothing seems to happen)

Making me scratch my head even more: Using Superdebugger is showing me
"something" being received by the gateway, but that's not triggering the
logic associated with the press in the program

E.g. press and release "Prev Ch" on the remote that should be RFID 20
<01/21/2010 14:17:03>CRX:Slot-01.ID-73 :1 Way TX ID:6F Join:33 Value:1
<01/21/2010 14:17:03>CRX:Slot-01.ID-73 :1 Way TX ID:00 Join:0 Value:0

Press and release softkey 10 for group 1
<01/21/2010 14:19:01>CRX:Slot-01.ID-73 :1 Way TX ID:49 Join:34 Value:1
<01/21/2010 14:19:01>CRX:Slot-01.ID-73 :1 Way TX ID:00 Join:0 Value:0

Any ideas?

Lincoln

--

Lincoln King-Cliby, CTS
Applications Engineer
ControlWorks Consulting, LLC

V: 440.449.1100 x1107 F: 440.449.1106 I:
Crestron Authorized Independent Programmer

[Non-text portions of this message have been removed]



[Non-text portions of this message have been removed]
Re: Beyerdynamic MCW-D 50-9 control unit module?

 

Not on their website, not on Crestron's website. The API is not very clear.
Anyone programmed one of these before?

--- In Crestron@..., "avsystemdesign" <avsystemdesign@...> wrote:

Does anyone know if there is a module for the Beyerdynamic MCW-D 50-9?
Re: Crestron-friendly replacement for BiAmp VRAM matrix audio mixer

Dave James
 

Biamp Nexia CS or PM, depending on your input requirements. The Crestron modules have some issues, although I seem to remember that someone has posted some ¡°improved¡± versions on here.

[Non-text portions of this message have been removed]
Re: Simpl Windows Freezes

 

That's both a lot of work to recreate and a lot of unbillable time, and it doesn't fix the underlying problem(s).

See my reference to PTSD in the original post...I've lost too much work to SIMPL Windows crashing over the years to consider anything more than 1 minute viable autosave.

--
Lincoln King-Cliby, CTS
Sr. Systems Architect | Crestron Certified Master Programmer (Silver)
ControlWorks Consulting, LLC
Crestron Authorized Independent Programmer

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of joshua zimmerman
Sent: Thursday, March 29, 2012 11:27 AM
To: Crestron@...
Subject: Re: [Crestron] Simpl Windows Freezes

Zing , its only 15minutes !

On Thu, Mar 29, 2012 at 10:25 AM, Jeremy Weatherford <xidus.net@...>wrote:

**


At least until it crashes and you lose 14 minutes of work...


On Thu, Mar 29, 2012 at 11:08 AM, joshua zimmerman
<zimmerman.joshua@...> wrote:
this is a known issue @ Crestron, set your Autosave time to 15 minutes
this will temp fix the issue and allow you to work.


--
Joshua B Zimmerman

The beginning of knowledge is the discovery of something we do not
understand.
- Frank Herbert

This message, including any attachments may include privileged,
confidential and/or inside information. Any distribution or use of
this communication by anyone other than the intended recipient(s
The information contained in this e-mail and any attached documents
may be privileged, confidential and protected from disclosure. If you
are not the intended recipient you may not read, copy, distribute or
use this information. If you have received this communication in
error, please notify the sender immediately by replying to this
message and then delete it from your system. This email may contain
confidential and privileged material for the sole use of the intended
recipient. Any review or distribution by others is strictly
prohibited. If you are not the intended recipient please contact the
sender and delete all copies.


------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
Yahoo!
Groups Links


--
Jeremy Weatherford




--
Joshua B Zimmerman

The beginning of knowledge is the discovery of something we do not
understand.
- Frank Herbert

This message, including any attachments may include privileged,
confidential and/or inside information. Any distribution or use of this
communication by anyone other than the intended recipient(s The
information contained in this e-mail and any attached documents may be
privileged, confidential and protected from disclosure. If you are not the
intended recipient you may not read, copy, distribute or use this
information. If you have received this communication in error, please
notify the sender immediately by replying to this message and then delete
it from your system. This email may contain confidential and privileged
material for the sole use of the intended recipient. Any review or
distribution by others is strictly prohibited. If you are not the intended
recipient please contact the sender and delete all copies.


[Non-text portions of this message have been removed]



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links
Re: Simpl Windows Freezes

 

Zing , its only 15minutes !

On Thu, Mar 29, 2012 at 10:25 AM, Jeremy Weatherford <xidus.net@...>wrote:

**


At least until it crashes and you lose 14 minutes of work...


On Thu, Mar 29, 2012 at 11:08 AM, joshua zimmerman
<zimmerman.joshua@...> wrote:
this is a known issue @ Crestron, set your Autosave time to 15 minutes
this will temp fix the issue and allow you to work.


--
Joshua B Zimmerman

The beginning of knowledge is the discovery of something we do not
understand.
- Frank Herbert

This message, including any attachments may include privileged,
confidential and/or inside information. Any distribution or use of
this communication by anyone other than the intended recipient(s
The information contained in this e-mail and any attached documents
may be privileged, confidential and protected from disclosure. If you
are not the intended recipient you may not read, copy, distribute or
use this information. If you have received this communication in
error, please notify the sender immediately by replying to this
message and then delete it from your system. This email may contain
confidential and privileged material for the sole use of the intended
recipient. Any review or distribution by others is strictly
prohibited. If you are not the intended recipient please contact the
sender and delete all copies.


------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
Yahoo!
Groups Links


--
Jeremy Weatherford




--
Joshua B Zimmerman

The beginning of knowledge is the discovery of something we do not
understand.
- Frank Herbert

This message, including any attachments may include privileged,
confidential and/or inside information. Any distribution or use of this
communication by anyone other than the intended recipient(s The
information contained in this e-mail and any attached documents may be
privileged, confidential and protected from disclosure. If you are not the
intended recipient you may not read, copy, distribute or use this
information. If you have received this communication in error, please
notify the sender immediately by replying to this message and then delete
it from your system. This email may contain confidential and privileged
material for the sole use of the intended recipient. Any review or
distribution by others is strictly prohibited. If you are not the intended
recipient please contact the sender and delete all copies.


[Non-text portions of this message have been removed]
Re: Simpl Windows Freezes

Jeremy Weatherford
 

At least until it crashes and you lose 14 minutes of work...

On Thu, Mar 29, 2012 at 11:08 AM, joshua zimmerman
<zimmerman.joshua@...> wrote:
this is a known issue @ Crestron, set your Autosave time to 15 minutes
this will temp fix the issue and allow you to work.


--
Joshua B Zimmerman

The beginning of knowledge is the discovery of something we do not understand.
? - Frank Herbert

This message, including any attachments may? include privileged,
confidential and/or inside? information. Any distribution or use of
this? communication by anyone other than the? intended recipient(s
The information contained in this e-mail and any attached documents
may be privileged, confidential and protected from disclosure. If you
are not the intended recipient you may not read, copy, distribute or
use this information. If you have received this communication in
error, please notify the sender immediately by replying to this
message and then delete it from your system.? ? This email may contain
confidential and privileged material for the sole use of the intended
recipient. Any review or distribution by others is strictly
prohibited.? If you are not the intended recipient? please contact the
sender and delete all copies.


------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links




--
Jeremy Weatherford
Re: HD Camera for Capture-HD-Pro

 

One of my clients has been using the Sony BRC-H700 with HFBK-HD1 card for cameras and the Panasonic AV-HS450N for switching.

Both work very well.

--
Lincoln King-Cliby, CTS
Sr. Systems Architect | Crestron Certified Master Programmer (Silver)
ControlWorks Consulting, LLC
Crestron Authorized Independent Programmer

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of jbudz1977
Sent: Thursday, March 29, 2012 10:18 AM
To: Crestron@...
Subject: [Crestron] Re: HD Camera for Capture-HD-Pro

So... no recommendations for HD PTZ cameras for Capture HD? Not easy to find the right one, and now the customer wants 2 cameras and the ability to switch between them. I wish Capture-HD-Pro had a HDMI in for camera in addition to HD-SDI...

I guess that is why Crestron is pitching a SD sony camera for the application...



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links
Re: Simpl Windows Freezes

 

this is a known issue @ Crestron, set your Autosave time to 15 minutes
this will temp fix the issue and allow you to work.


--
Joshua B Zimmerman

The beginning of knowledge is the discovery of something we do not understand.
? - Frank Herbert

This message, including any attachments may? include privileged,
confidential and/or inside? information. Any distribution or use of
this? communication by anyone other than the? intended recipient(s
The information contained in this e-mail and any attached documents
may be privileged, confidential and protected from disclosure. If you
are not the intended recipient you may not read, copy, distribute or
use this information. If you have received this communication in
error, please notify the sender immediately by replying to this
message and then delete it from your system.? ? This email may contain
confidential and privileged material for the sole use of the intended
recipient. Any review or distribution by others is strictly
prohibited.? If you are not the intended recipient? please contact the
sender and delete all copies.
Re: HD Camera for Capture-HD-Pro

 

So... no recommendations for HD PTZ cameras for Capture HD? Not easy to find the right one, and now the customer wants 2 cameras and the ability to switch between them. I wish Capture-HD-Pro had a HDMI in for camera in addition to HD-SDI...

I guess that is why Crestron is pitching a SD sony camera for the application...
Re: CHV-TSTAT with Mini-split HVAC system

mrmondegreen
 

Some of the Mitsubishi units work with BACnet (which uses RS-485). I've seen the protocol specification or a module on here (if you don't see it, e-mail me), so you may be able to roll-your-own solution. Crestron also has a specific device to interface with BACnet (GLS-BMA).

Chris W.

--- In Crestron@..., "Chris Anello" <chris.anello@...> wrote:

Have a client with a pool house.
Stage one heating done with radiant from geothermal (same as system in house where we currently use, but has geo cooling, too)
Secondary heating and first stage cooling are spec'd to be controlled by a Mitsubishi MSZ/MUZ (MSZ-FE18NA indoor/MUZ-FE18NA outdoor) single-room mini-split heat pump. The unit has an RF remote and optional wired control, but does not use typical Tstat wiring (relays).
Has anyone dealt with controlling this via a Crestron CHV-TSTAT so that the HVAC can be properly staged and controlled (they currently have compteing heating sources.)

We have the option to replace the system with something if we know it can be easily integrated. Anyone use anything like this (18,000 BTU) and can control from Crestron.
Maybe even something that has another form of interface or com port (RS232/485)

Any help would be appreciated.

-C
Re: TCP/IP control of a Wolfvision Eye-12

 

Sorry to drag the thread out from the grave, but we are now seeing a similar problem with IP controlled EYE-12. Did you ever find a solution to your problem?

Thanks,
David

--- In Crestron@..., "Witmarquzot" <tdurrant420@...> wrote:

do you mean port b is set to 192.168.1.1 and the camera is set to 192.168.1.2?
--- In Crestron@..., Jim Crone <installman12003@> wrote:

Has anyone controlled one of these TCP/IP?


I am using the I2P module Wolfvision Eye-12 TCP/IP version to control an Eye
12. I have it connected on a local network directly from Port B of the
C2ENET-2 to the Eye-12. I am using IP 192.168.1.1 on the TCP/IP client symbol in
the program and IP 192.168.1.2 in the Eye 12 ethernet setup. Subnet mask is
255.255.255.0

Quite often when zooming and focusing the power off feedback goes low for a
few seconds and then goes back high but the Eye-12 is still powered on. Other
times the unit just powers off by itself. I inserted a mini switch into the
data drop at the crestron end thinking maybe the Cat 5 cable was too long but
there was no change.

Any idea as to what might be the problem or what I am doing wrong?

Thanks
Jim




[Non-text portions of this message have been removed]
Re: Simpl Windows Freezes

 

We have also discovered the freeze issues when working with the DMPS-300. We have concluded that it's caused by the OOTBF. I've also noticed that back in the day when working with the MPS-300 (QM), Simpl would also freeze since that also had OOTBF.

Matt

--- In Crestron@..., "Bobis" <msnsugerpurjo@...> wrote:

Is it only when working with DPMS-300?

Have had similar problems with my computer with programs freezing for some time.
After removing all the printers I had installed (2 on network) i cut the coffebreak from 15s to about 3s

--- In Crestron@..., Lincoln King-Cliby <lincoln@> wrote:

It's the DPMS-300.

SIMPL Windows goes into "take a coffee break mode" on open, save, autosave, and if you're lucky even on close.

It may be my PTSD but every time it does that I start to worry about how current the .ASV...

If you're feeling lucky, you can turn Autosave off but that is at your own peril.

Various people at various levels of Crestron have been promising a fix "soon" since October.

--
Lincoln King-Cliby, CTS
Sr. Systems Architect | Crestron Certified Programmer (Silver)
ControlWorks Consulting, LLC
V: 440.449.1100 x1107 | F: 440.449.1106 | I:
Crestron Authorized Independent Programmer


-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of wretaudio
Sent: Wednesday, March 28, 2012 9:11 AM
To: Crestron@...
Subject: [Crestron] Simpl Windows Freezes

I have started working on my first DMPS-300 Simpl Windows project. While I am not at all a fan of this piece of hardware, I have started having Simpl Windows freeze up for several seconds and then start working again. Just wondering if this is something to do with the latest version of Simpl, or is this particular to a Simpl project involving the DMPS-300?



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links
Re: Simpl Windows Freezes

 

I think when I first found it my conclusion is that it's a problem to some extent with anything that has OOTBF, but it's orders of magnitude worse with the DMPS.

No problems whatsoever programming real 2- or 3- series boxes.

--
Lincoln King-Cliby, CTS
Sr. Systems Architect | Crestron Certified Master Programmer (Silver)
ControlWorks Consulting, LLC
Crestron Authorized Independent Programmer

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of Bobis
Sent: Thursday, March 29, 2012 5:08 AM
To: Crestron@...
Subject: [Crestron] Re: Simpl Windows Freezes

Is it only when working with DPMS-300?

Have had similar problems with my computer with programs freezing for some time.
After removing all the printers I had installed (2 on network) i cut the coffebreak from 15s to about 3s

--- In Crestron@..., Lincoln King-Cliby <lincoln@...> wrote:

It's the DPMS-300.

SIMPL Windows goes into "take a coffee break mode" on open, save, autosave, and if you're lucky even on close.

It may be my PTSD but every time it does that I start to worry about how current the .ASV...

If you're feeling lucky, you can turn Autosave off but that is at your own peril.

Various people at various levels of Crestron have been promising a fix "soon" since October.

--
Lincoln King-Cliby, CTS
Sr. Systems Architect | Crestron Certified Programmer (Silver)
ControlWorks Consulting, LLC
V: 440.449.1100 x1107 | F: 440.449.1106 | I:
Crestron Authorized Independent Programmer


-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of wretaudio
Sent: Wednesday, March 28, 2012 9:11 AM
To: Crestron@...
Subject: [Crestron] Simpl Windows Freezes

I have started working on my first DMPS-300 Simpl Windows project. While I am not at all a fan of this piece of hardware, I have started having Simpl Windows freeze up for several seconds and then start working again. Just wondering if this is something to do with the latest version of Simpl, or is this particular to a Simpl project involving the DMPS-300?



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links
Re: Crestron-friendly replacement for BiAmp VRAM matrix audio mixer

 

I have been using Symetrix Matrix Automix DSP's for my mixers. The Symetrix control protocol was well done with Crestron in mind. Good automatic feedback, volume ranges from 0-65535, etc.

--- In Crestron@..., Jonathan Larson <jtlarson@...> wrote:

Hi all,

I have an aging BiAmp VRAM rack mount mixer that seems to have some failing input stages. Can anyone recommend a crestron-controllable rackmount mixer capable of at least 6x2 ins/outs?

Jon Larson
Multimedia Systems Administrator
University of Washington School of Law



[Non-text portions of this message have been removed]
Re: Controllable Sonos style iTunes media player

 

I am a little wary of the AppleTV route incase of a firmware update that kills the control functionality. If I need their MMS-2 box to make this work reliably, then that's fine.

--- In Crestron@..., "Ted" <ted_brincka@...> wrote:

The Autonomics MMS-2 or their Apple TV module to control iTunes right from a PC.

--- In Crestron@..., "wretaudio" <wretaudio@> wrote:

Basically a hardware device that can go through a network to find and play music files in an iTunes library. Sonos player can do this, but they do not have any control features. I need to design a system for a cutover that as soon as they add an audio file in iTunes by any method, it is available to be played for a player that is controllable from a Crestron touch panel.

Thanks again for your help.

--- In Crestron@..., "Paul Cunningham" <paul.cunningham@> wrote:

I'm not sure what you mean by "Sonos style" but the Autonomic MMS-2
sounds about right.

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On
Behalf Of wretaudio
Sent: Thursday, March 29, 2012 8:19 AM
To: Crestron@...
Subject: [Crestron] Controllable Sonos style iTunes media player

Is there a Sonos style player out there that can play iTunes music files
that is RS-232 or IP controllable? All I need is to be able to play
audio files in one zone or area of a building.

Thanks.



------------------------------------

**
***

Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
**
***Yahoo! Groups Links
Crestron-friendly replacement for BiAmp VRAM matrix audio mixer

Jonathan Larson
 

Hi all,

I have an aging BiAmp VRAM rack mount mixer that seems to have some failing input stages. Can anyone recommend a crestron-controllable rackmount mixer capable of at least 6x2 ins/outs?

Jon Larson
Multimedia Systems Administrator
University of Washington School of Law
101821 - 101840 of 256463