开云体育

I've tried to delete SPLs e.t.c. Until "ReCompile ALL" it didn't work. More over, after the first pressing Recompile all, I got an info that I have lots of errors in SIMPL project. F.e. It found some

what name a module sir, i need the module right now, i can't found in application market

Look in the device extenders for the processor. ?System Monitor>System Control

Hey All, I have 3 programs on my processor, how can I control when one is started vs the other? For example: On system reboot, I don't want program 2 to start until I tell it to. Thanks

I know I can loop over an AddressList of device hostnames/IP addresses, but I would like to dynamically set a hostname or IP-ID according to the device. This didn't work for me, but I can't help but

Don't forget to go to iPhone Settings, Scroll way down to your apps list and find CrestronGo, and enable "Allow CrestronGo to Access: Local Network" If you are connecting over Cell enable Cellular

I think the regular compile just doesn't recompile the modules if the SPLwork folder has a previously compiled version in it. That's one of the reasons why I always use Recompile All. I'm sure it adds

FTR, the OP said that his issue was with an iPhone....

Were you able to figure out what remote codes worked with the evolution boxes?? I have 11 going into a system.

It does work when ran through VT-Pro and Toolbox does show its connected to the correct IP ID. The Samsung phone is using local wi-fi and the IP address is on the same subnet as the Crestron

Has anyone done this?? The API says Ascii, Hex, Base64, RTF8 with a 128 character limit.? All the commands I have are pronto hex. For testing, I'm using known working TV commands for a sharp I have

I have a client that got the latest SAMSUNG smartphone (S25 Ultra I believe), and for the life of me I couldn't get it to connect with that phone, every other phone in the house (wife, kids, etc)

I would run the Crestron Go file in VTPro-e and see if you can get it to connect. I'd also see if you can "see" the app in toolbox when you have the app open, if so transfer the project file to the

" click 'Recompile ALL'." Many thanks - that works!! I'm still wondering what happens with regular compile. but I can work !

I didn't see an affirmation that the phone and processor are on the same subnet. If they are not, and you don't have correct gateway set on the processor, it will be exact same situation (you will see

Yes. In SMW, Crestron GO Project Name extender should just have the VTPro File name without its extension. EX: If the File name is 'CKadapt-Tablet-v2.vtp' you would put just the 'CKadapt-Tablet-v2' in

two things to try in SMW: 1. In the OPTIONs DropDown, click Reload Device and Symbol Libraries from Disc 2. When you compile, use ALT+F12 (check reference with MAC) or use the PROJECT DropDown, and

The ports look good from everything I have verified. In the error log it says "Ok: CIPCommandProcessor # 2025-03-05 16:13:10 # ?DEVICE_REQUESTS_PATH_TO_MOBILITY_PROJECTS being requested by device at

When you get the manifest not found error, that is almost always an issue with the web port. Make sure that your HTTP port on the processor matches the settings in your app. Get Outlook for

The processor I have attempted to get Go for Android to work on is a PRO4 with the latest firmware. The Go app is from the Google Play Store. The Go App does say when its opened "Disconnected from