开云体育

Hi All, I just noticed that there a v4.1 version of the MPO router module... Anyone know what is new/different about it vs the v4.0 module?? ...Of course the help file isn't updated to tell the

Sadly not anytime soon with the current generation, and possibly never, simply because the masses are so easily controllable, and the other side has no interest to teach the masses not to use their

Check Slot 7 on your processor tree.? System Monitor.

Regarding your first question (If I'm understanding it correctly), You can just use the '1' signal to trigger logic to 'INITIALIZE' your states on program start. Assuming that your Sliders are using

When will we finally realize that Cloud computing is fundamentally a problem?...? ? (And I do understand some of its benefits...) Give me a desk-top app any day of the week over cloud...

Systembuilder and D3Pro have modules for this.? One is called "Check for Program Difference" under System Control and speedkey is "NeworOldProgram.cmc" and the other is "SB System 2.0.cmc" (which is

As mentioned, i already have the channels of the Trinnov converted to Dante/AES67. I only need something to change the routing. The mentioned Ecler MIMO7272DN would be very similar to the suggested

We are doing something very similar on a project with a CP950 and Storm, it’s all runs through a Q-SYS core 110f to handle the routing. In your case you would need (2) Core110f or and 510 for the

Mh, thanks for the feedback so far. Yeah, that was my understanding as well that the Dante Director is cloud based which I don?t think is a good solution for just a local use-case… ? So the use

Hi everyone. I am using a Crestron CP4 processor and I want to send command to readjust my slider feedbacks when the controller ever reboots. Please advise how I could get this feedback signal to

Oh crap, I'm in a secure site with no internet access. How crap is that?

Because of Airplay and Spotify Connect on the amps, I am now having Crestron be on the same lan as the house.

Hi Mathieu. Check this parameter list, CrestronXPanel. exe Xpanel.c3p -- *bypasslogindialog=true id=user password=mypass enablessl=true* overridehost=true host=10.10.10.1 port=41794 ipid=0x03

Apologies, Juggling to many cats. Should be 50Hz not 60Hz

Is there a way to retrieve a project that was loaded to the ipad and not the processor? Have a ipad with a crack screen and just want to pull and reload to a new one.

Unfortunately the remote that comes with the Fire TV stick is RF only, which is why I am forced to use a FLIRC. I am asking if anyone out there has converted those commands to IR - I would be happy if

I've seen this happen when the broadcast is both 2.4 and 5 combined.? Some device just can't negotiate correctly.? Try creating a seperate SSID at 2.4 only and broadcasting just from that AP

You can also use CTRL G to go to a specific join number

I have found a bug in D3 for 3 series when using CNX keypads.? D3 when building/compiling the program is not creating the enable logic for the backlight.? You have 2 options to fix.? Option 1 -

Does anyone have a custom EDID they could share? Looking for DM Default 4K 60Hz 2ch DM Default 4K 60Hz HBR Cheers