开云体育

Hi everyone. I am using a Crestron CP4 processor and I want to send command to readjust my slider feedbacks when the controller ever reboots. Please advise how I could get this feedback signal to

Oh crap, I'm in a secure site with no internet access. How crap is that?

Because of Airplay and Spotify Connect on the amps, I am now having Crestron be on the same lan as the house.

Hi Mathieu. Check this parameter list, CrestronXPanel. exe Xpanel.c3p -- *bypasslogindialog=true id=user password=mypass enablessl=true* overridehost=true host=10.10.10.1 port=41794 ipid=0x03

Apologies, Juggling to many cats. Should be 50Hz not 60Hz

Is there a way to retrieve a project that was loaded to the ipad and not the processor? Have a ipad with a crack screen and just want to pull and reload to a new one.

Unfortunately the remote that comes with the Fire TV stick is RF only, which is why I am forced to use a FLIRC. I am asking if anyone out there has converted those commands to IR - I would be happy if

I've seen this happen when the broadcast is both 2.4 and 5 combined.? Some device just can't negotiate correctly.? Try creating a seperate SSID at 2.4 only and broadcasting just from that AP

You can also use CTRL G to go to a specific join number

I have found a bug in D3 for 3 series when using CNX keypads.? D3 when building/compiling the program is not creating the enable logic for the backlight.? You have 2 options to fix.? Option 1 -

Does anyone have a custom EDID they could share? Looking for DM Default 4K 60Hz 2ch DM Default 4K 60Hz HBR Cheers

If a remote comes with the device and assuming it's IR (some remotes now use RF) you can do it that way. If the API or codes do not support it you might be out of luck. [email protected]> wrote:

You would need the Dante Director subscription for that site/domain and the Dante subnet would need access to the internet FWIW - a “virtual matrix” does work, Audinate had it running at ISE and

If you use a DSP, Tesira, Q-Sys, etc, you could control that. Have Dante inputs go into a matrix mixer then out ot Dante outputs. You can also process signals, EQ, etc. I suggest Q-Sys Core Nano

Hi, ? with the Dante Controller software, I can manually change the routing of the Dante/AES67 devices on my network. What i?m looking for is something like a “virtual” Dante/AES67 matrix, that

I am currently controlling a Fire TV stick using a FLIRC adapter within Crestron Home. Customer has requested direct Netflix and Prime buttons on his Crestron remote. Does anyone know of a way I can

Home Assistant is an open source smart home platform that supports integration with a wide range of smart home devices.? Through the work of two Crestron programmers, a Crestron system can be

OK. After re-Compiling the original, re-saving and compiling, and after many tries, the modules are there, but the latest issue was getting an X-panel to connect. Finally got that, but changing the

Thanks for responding Chris. 1. It's a CP4N. (sorry) 2. That far back, huh? I guess that's why there's some leftovers in the warehouse to use. Understood. 3. I do see Slot7, but didn't notice the

Jim, Answer is "it depends" 1. There is no CP4E.? Are you talking about a CP2E, CP4N, or CP4? 2. MPC-M5 is a 2 series processor 3. The MPC-M5 does support ethernet control devices. In SIMPL you