开云体育

You will need to use link aggregate. This will make so you have enough bandwidth to do it. Michael Restrepo | Owner Restrepo Innovations 825 Windham Court North Wyckoff, NJ 07481 Office | 201.925.0059

The link between them will only allow 1g. You can only stream 1 source/display at a time for anything on the second switch. You need a 10g link between both switches.

Hi All. Is anyone knows if there is module for MX100 available. Thank you

Unless something has changed since i last used araknis, i didn't think they had the uplink requirement between switches to handle multiple

We have a NVX system that was set up a few years ago with Araknis switches. Yeah, I know, not ideal. The system works fine on with the NVX equipment on the main switch, the secondary switch works

Not much help here, but I seem to remember reading about these new AVRs and the old ZA modules didnt work correctly on them. Was this ever solved? I have a job with a few AZ coming up.

I use these photoresistor relay modules for various things in my own system

Nest protect would probably do what you need. The crestron integration is a PITA, but if you install them in you main house and the back house they will notify through the detectors in the main house

I'll be testing one over the next few days, I'll post the outcome here. have you done your own testing or not yet ?

Well, there are smoke detectors with relais output that can be integrated into any home automation system. Just as an example, we use the Gira Dual Q detectors with the ability to integrate into KNX,

Hi All, Anyone integrated with the AZ1000ES (new Series) AV Receiver via IP (Esp. if using the old ZA module). If so, Have you had any issues with communications failing and needing a program

Does anyone know of a good led sensor. I am trying to get feedback from a gate entrance. It is older linear gate device and the only fb I see is an led light on the board that is illuminated when the

Looking for some insight on the following. Attempting to connect to a somfy UAI+ via IP using the posted v1.5 modules off marketplace. Unable to get the modules to connect whatsoever. UAI+ is

I wasn't suggesting to use the First Alert smoke/co detector, which is battery operated and doesn't meet your requirements. I was suggesting to use the Firefighter Z-Wave Plus Wireless Smoke/CO *Audio

New construction building code here dictates hard wired detectors.

The Firefighter Z-Wave Plus Wireless Smoke/CO Audio Sensor might work for you. https://discoverecolink.com/product/firefighter-z-wave-plus-wireless-smoke-co-audio-sensor-diy/ I included this in an

I am currently building a unattached garage with a bonus room over, with the works. New building code dictates wired detectors. The building will be pretty much sound proof so if the detectors go off,

In the RS232 connect settings in Toolbox uncheck RTS/CTS ________________________________ Sent: Friday, July 12, 2024 8:13 PM To: [email protected] <[email protected]> Subject: Re: [crestron] Serial

Have not used NAX before either so not sure exactly how it works, but is it possible to connect it directly to the QSC core on LAN B via a Poe injectors and see if the core still reports packet

I actually was not aware of that. Thanks for the suggestion. I think that will do the trick.