开云体育

I'm not super familiar with Marantz gear - what protocol specifically should I be looking for? Thanks.

RIP out Sonos and put in Autonomics? Wow, talk about out of the frying pan and in to the fire.

After processor reboot, control of shades is lost. The Rollease Hub 2 still shows online but all shades associated report "Driver failed to load". Each shade then has to be reassigned to the room and

@Steve Kuehn that is an interesting point about WiFi on Sonos. I will test this theory soon after we rip out Sonos and put in Autonomics, maybe that was an issue all along.

Ah I dont think I ever noticed him posting there. I'll message him there. Thanks!

is it possible to control dmps-300-c video board from telnet? trying to set : C2I-DMPS-300-VIDEO>setvideoroute 02 17 and nothing happens

He seems active and helpful to others on Facebook (Crestron Professional Group) I saw a reply from him 3 hours ago there is that helps

Hi All, Anyone have any issues with Crestron Home and DM Transmitters not appearing in the Pair Devices Folder? ?The DM-MD-16x16-CPU3 recognizes everything (all input, output cards, room boxes and

Thank you guys for the good information. I do agree that the 2 series processors are rather outdated and somewhat finicky at best. While it would be nice to be able to upgrade to a current processor,

Yeah, this has actually been a problem in the last ~6 months. I hadn't seen it before but they just keep coming up with new issues...:( I just logged into a site yesterday and had to manually restart

I see what you did there, Brian!! Good One!!!...:) I agree with Brian about this. I pretty much never use slave/remote devices for 3/4-way circuits, because you always seem to need a 'keypad' where

Just curious if anyone is using the "offline" output on the Sonos Device module.? I haven't seen a case yet when a Sonos end point gets dropped and the "offline" output doesn't go high.? I would

About 50% of my systems are like that... The other 50% are a problem... Haven't found anything unique about them...3 and 4-series, various FW versions, various vintages, various network hardware,

Hi Brian! Thanks for the reply. ?So, which of the Apex/Aux/SWEX ?are best for my use case? ?In fact, thinking about it. ?Is there any reason, save the Crestron system going down, to use the

You can add as many KPEX devices as you want and just make them "programmatically" control the load. Just connect them to hot power only and ignore the traveler. We do this quite often with the Cameo

This is all really odd, as I have several (probably 20) systems out there running Sonos, with no issues. I've had a few fail, but after they are replaced with a Port they March on, without a

Hoping this is not too off topic but have you utilized AirMedia with a Flex Zoom Room system? I have followed all the guides to put the AirMedia into "Flex Mode" but I cannot seem to get the Flex

Using matt_rasmussen_2000's Roku 3 Series release module fromt he file section and it works great but getting a bunch of exceptions in the error log. A sample of the errors: 381. Error:

Hi All! I have the above hard wired wall switches, in a working lighting situation. ?I read the the Hz2 Dimmers and the Aux or KPEX are Gggod with up to a 4 way circuit. ?Any advice on a workaround

Yea agreed. ?we dont really work with 2 series anymore. ?they are so old that you wind up spending too much time troubleshooting. It's more cost effective to just replace it with a modern processor