开云体育

My old programming template, that is located on my GitHub (https://github.com/jbasen/Crestron-Template), is all based on crosspoints.? The hardware drivers for touch panels and sources is all out of

I've built all my starter programs with Crosspoints? TP Connects to Room and Room Connects to Source.? In this fashion All TPs have a unique naming.? The room chooses the source to connect to and

Havn't tested the lock to band.? But you still want to keep it from roaming.? We have an large Extreme network and wifi and we will see a remote connect to a weaker AP on its own.? And this causes

having a brain freeze.? is there a symbol or module that will combine multiple strings? or a module that will take the 3 digit analog of a thermostat and output it as serial with a decimal?

Does anyone know how to use Crestron OpenSSL Utility (cosu)? I need to generate a certificate :)

Hi All (And Dave H particularly) In the past few years, I have set up a separate SSID at 2.4g only (and sometimes set up separate ones on each AP to prevent roaming). Crestron’s new FW for these

I think it’s different length of time that the IR is sent for. I have run mine through a one shot and played with the length of the one shot to achieve what I wanted.

IIRC, Crestron sends the “one time” flavor of the command initially and then keeps sending the “repeat” flavor of the IR command, if available, continuously as long as the signal is driven

Unless I'm missing something, the issue is that there's not specific, discrete commands for the Press, P+H, Keep Pressing and Holding - These are three different functions. With the Crestron IR this

Sorry not really helping here, but Crosspoints is what keeps me sane. I've seen/had to work with WAY too many programs with 100's of buffers and I just feel bad for the original programmer because

Instead of using the AppleTV IR commands drop in a simple Sony universal blu-ray set instead. ?Next step on the ATV go to settings then remotes then learn remote…name it whatever you want at that

In that PUSH Inc function make sure it is a 3 not a 4.? 3 is up, 4 is down. this: IncrementCh(ch,3); not this: IncrementCh(ch,4);

So, I made the changes to the Simpl module, but I'm still getting the lower on both Inc and Dec. I look in debugger and it's sending the same string for both....

Thanks Scott, I will give that a shot!

I'm just finishing a project where I used this nLight module and encountered the same problem as you.? There is an error in the handling of the PUSH ChInc.? It has both a increase and then a

Hey djkevinz, Thanks for creating this module! I am using it for a project and I am using the ChInc and ChDec as well as on/off. Everything is working great except for ChInc. ChInc is Dimming the

Ken I have a job coming up with a X700. Has this IP module been reliable for you?

Audiocontrol amps are fully supported and easy to integrate into Home without a license. DSP and the web based controls are far better than SWAMP was.

Thanks guys, This project is an upgrade to a system and the VTP file already has joins but the previous guy did some whacky stuff and it looked like running all the SG traffic is going to cause some

The best option is to go to av switchers under drivers and see what is available.? Most, if not all, of the drivers for non-crestron devices are 3rd party, but in this list, certified.? Some cost