I may have a working Vio module pulled from an eholo we updated to 2n recently.... Friendly price, if you want it, dm me.?

I appreciate your reply. I was doing a search on their website and couldn't find the info.? I was searching with "rs-232." When I searched with "rs232",? it gave me the info I needed.? You set the mode in the GUI of the receiver mode2.? This mode makes the connection from the ethernet port straight to the com port of the receiver using port# 6752.? ?You have to set the baud rate of the receiver as well.

I did a video wall with the Color Max MC-RX1/TX1 about a year ago.? I know the baud rate is adjustable.? If I remember correctly, you change the baud rate via a telnet command.

The Color Max was a brand new product when we used it and we had a lot of lock up issues at first.? In particular, it would tend to lock up when you send it a command (whether it be a IR, RS232, or video wall command).? We landed up running IR to the displays from the Crestron processor to help reduce the lock ups.?? But even then, we had occasional lock ups.? Eventually Just Add Power did come up with a firmware update and after that the product was stable.? But I didn't go back and try using RS232.

After the initial issues, I was pretty impressed with the things the Color Max could do.? And absolutely no passwords required (unlike Crestron).? Even can preview the image via the web gui even with HDCP sources. The major down fall however is it does not support 1080i (at least a year ago it didn't).? So for cable boxes? satellite receivers you will have to use 720p.

Tech support was pretty good.

I might note that we used standard multicast instead of their custom manage switch solution.? So we did not use their Crestron module.

It has been a while since I have worked with a JAP system, but I do recall that you do in fact simply use a TCP/IP client with the endpoints address and the port number for whichever operation mode you are using. There is a section in the GUI of the JAP receiver that you can make adjustments for the serial mode as well as the baudrate settings. There are also jumpers on the endpoint for making the serial connection straight or null.

CP3 firmware issue?? You might try downgrading the firmware to a version from a few years ago and see if that make a difference.? I myself haven't seen this issue -- but for Series 3 devices, I use Crestron firmware/software back before the Series 4 came out.? Particularly now that the Series 3 has been discontinued.? I only use the latest and greatest firmware/software for Series 4 devices.

You also might try putting the CP3 on its own subnet and point all the end points to the new IP address -- that would shield the CP3 from other devices flooding the CP3's network port.? I had an issue back a few years ago with Haiku fans flooding the network with packets and messing up my Series 3 devices.? Landed up putting the Haiku fans on there own subnet to fix the issue.

Hello, Do you have an example for the Simple+?
best regard

the json modules of crestron is great for working with files ,after you use it u dont put any more names in vtpro
its in application market:
https://applicationmarket.crestron.com/json-suite-v2-1/

https://applicationmarket.crestron.com/content/Help/Control_Concepts/JSON%20FileProcessor%20v1.0.0%20Help.pdf

Go with 2n.? I would steer clear of Holovision.? Just about every one we installed has failed.? I've also done AVLinkpro which is a Linux based SIP server and requires a lot more configuration / customization, but its not native Rava.

I found this one on Google.

Guys,

Thanks for the recommendations. They both look like they will do the job nicely (at some cost though :) )

I know I have a few. They are at the office, so I won't know how many until tomorrow.

Hello,

If anyone has blank CBD-P-W-T buttons (the small one, not the split buttons you can use in the bottom two positions).? ?I am looking for 40.? ?If you have some you would like to part with please let me know.

Thank you
Bryan

TBH, we arent even messing around with Construct until there is a viable port over from our current package of interface options.? There needs to be a way to crossover for clients with older systems and clients with new requests.? This whole releasing of panels not capable of running VTPro projects just reeks.

One disadvantage Tony of the V1 vs V2 is that the engraving options for the V1 are more flexible. In the new "Impress" engraving program, they just have a few fixed options for how you can lay out the buttons on the V2 keypads. I went through this with Crestron showing the design my client wanted, based upon his previous V1 HZ keypads. They 'fessed up that the V2 couldn't do what the V1 could, but they made a "feature request" for what I wanted, but didn't promise it being deliverable for months. Are there electrical or appearance differences?

OP

开云体育

开云体育

Nope, I would bet on some equipment is flooding the network and the cp3 gets affected.?

To save me a bit of reading, can you tell me what advantages the v2 keypads have over the v1 models?

Thanks!

Hi All,

We have about 3 dozen white HZ-KPCN keypads in brand new condition, although the boxes were opened and 1 of the 2 cresnet terminal blocks have been removed (take to site and pre-terminated on a very long term project).

We've converted to HZ2 series on this and Im sure someone out there could still make good use of these V1s.?

We are in the SF Bay area...? contact me directly chad at chamberlux.?

On Tue, Jul 25, 2023 at 04:32 PM, Justyn Philpot wrote:

I think Construct has the ability to replace VTPro in some use cases, mainly commercial with many important resi essential features still to come.

I think that the big missing piece for Resi is the lack of the MPO at the moment, unless there's been some movement on this...

You could also try this. or this