开云体育

You can change the load type from switching to dimming on the units themselves. The steps are all laid out in the reference guide, page 7 onward The reference guide is here (

I inherited a project with 4 of these devices.? On two of the devices none of the zones dim (they act like a switch: ON or OFF).? It appears that the setup for this is handled thru iLux Designer

Causes a JAVA script error at first run, hit OK, then splash screen shows up, which needs to be ended via task manager. Too busy to figure it out right now (maybe reinstall or Java update?) -?

I looked at writing a Netatmo integration driver a few years ago.? They use full OAUTH2 authentication protocol which makes integration with a Crestron processor problematic.? If you are looking for

Hi, anyone already doing integration of the Netatmo system into Crestron? Thanks, Thorsten

If anyone have feedback please share! Curious to see if it's working well.

Mark, I can't remember, did you try locally powering the RMCs?

Am I just old, or was the original way of using modules in SMW much simpler??

client ran new cat cable to PJ, still not working asked client to source another POE switch i can't think of what else could be causing things to be intermittent all boxes worked locally on short

got the full model #, picked the correct Samsung CCD driver dealer wired the set, works now

Yeah, there probably are. I updated the repo to have a full package download option, notably it includes a couple of DLLs that it needs.

Nevermind, gave up and coded a custom one.....

Hi, I have a CP3N with a defective SD card. Could someone help me with an image file. The MAC and SN will be changed directly. -Sascha

We've had lots of issues too. I'm not quite ready to call it the secret sauce, but it does seem manually setting the NAX port on all NVX devices to 5004 and sending 5004 with every stream switch has

Sound like a nice tool. Can't seem to get CCDInfo.exe to do anything though - neither from Explorer nor the command line. No messages, just does nothing. Are there some dependancies I'd need?

I made a small GUI program that parses the information from a CCD and makes it easier to read. It takes either the zip file or the pkg file and shows the most useful pieces of information in a table

I've had these problems in the past.? There are always one of two problems, network configuration and streaming port settings. If you check the "Device is Master PTP Clock Source" and all NAX say

Am I the only one having loads of trouble (Rx streams stuck on "Connecting") lately? Weh ave lots of NAX jobs where we only have audio from NAX 1 or 2 or even 3, but now we are starting to use the

Use 7zip to open the archive and open the day in notepad++. Look for the user attributes and follow them. Alternatively you can set the program to load the driver and send the user attributes to

I believe you have to go into the settings menu and allow 3rd party control to get the pop-up. natalie.noel.jackman@...> wrote: