开云体育

Lutron qs works fine on 4 series

It's my understanding that inbound Telnet to the 4 series is disabled, but the 4 series can still initiate Telnet communication with 3rd party devices. I haven't tried it with the Lutron QS modules,

I still only using 3 series. But the lutron modules work via a tcp client in simpl. If telnet doesn’t work in 4 series I think that will mean it won’t accept incoming telnet connections to the

David, AVLinkPro has always worked great in our Simpl integrations. I haven't tried it with CH yet, but they have a product geared specifically to CH. Also, they just released a "SIPAHOY" bundle that

Hi group, Please help with such a system: Crestron Control system => CEN-ERFGW-POE gateway (Cresnet - 2-way RF gateway) => TST-600 Panel. How, in the Toolbox or VTPro, for example, can you send a GUI

Hi Group, I need to control some shades and lights from a Lutron QS system. I'm using a CP4 with the QS r04 modules and from what I understand you can no longer use telnet on 4-series processors. My

Don't think I've done one with Crestron but from Q-SYS iirc it's just VISCA (with presets 80 and 81 to enable and disable tracking). -- any of the Sony EVI-Dxxx 1-way serial with the extra presets on

What module do you guys recommend to control this camera ( Aver PTZ310N) via RS232? Thank you

/g/crestron/files/Modules/HaikuFan%20v2.1.umc

In boot settings, is WOL On? Sounds like the unit goes to sleep and won't wake up. We had a similar issue with (8) NEC 90" monitors in a classroom. Not all of them would turn on and it seemed to be

The AMP-2210HT is our go to amp here at the university where I work. We have them in more than a dozen rooms in both 4/8 ohm configurations and 70 volt. The sound is just fine. We only had one issue

Hi, Can you let me know your email address or you can send me an email on rajiv.jain at synapsetech dot io <jarlehenriksen@...> wrote: Rajiv Jain

Exactly what I do. I use both protocols. No problem. I’ve written my own module in simpl# for the http protocol. Over time I may add the transport and volume control etc in to the simpl# module

Well after reading your answers I realised that both modules don't use the same protocol on TV but if both co-exists without problem it's fine ;) Will go this way, thanks for help ;)

I'm interested in testing your module ! My test Pro# has MAC: 00:10:7F:3D:28:F0 Thanks in advance. Jarle

We have a module developed for Android Sony TV. You can recall apps and they appear as as when you download live on the TV. Please send us the MAC ID of the processor and we can send you a

Yes I agree. But you can’t add the commands to directly launch apps ( other than Netflix which has an IR Command) To directly launch other apps you need to send commands via http requests. That

Hi ! I'm using the Sony 2014 Bravia module from the app. market. It's easy to add commands to the module, particularly in the IR emulation section. The IR commands for new functions are well

Any compilation errors are likely the result of your code (or the packages you're using, if any). -- Crestron Service Provider - TBD Enterprises Inc.

This is correct, particularly if the device is (a) not at 9600 and (b) you’re using he device extender to set the baud rate – if the device goes offline, unless you’re careful with your