开云体育

?However, I’ve seen some disconnects much faster than 20 minutes “ Yep, same here. Cheers, Thorsten Von: [email protected] <[email protected]> Im Auftrag von jbasen Gesendet: Donnerstag, 12.

Hi Jay, I make use of interface devices from Intensis which offer device specific modules and allow AC control over Wifi. For the larger projects with VRF systems, I opt for CoolMaster K

What is the fault? It is more likely the logic that is feeding the OR. Is one signal Hi when you expect to see a Hi from a different signal? The logic engine is the most robust piece of Crestron's

So tired of faulty "Or" symbols having to replace with buffers!!

The console command you are looking for is: SETLogoffidletime 0 Haven't tried it with SIMPL debugger yet.? However, a few days ago, I was ssh into a CP4 all day (no Crestron software involve) and had

I just noticed that the header for this topic mentions 4-Series, so this might not apply exactly. I had this “debugger time out” concern when working with my CP3 on my test bench. TB pointed me to

Thanks. Good to know. However, I’ve seen some disconnects much faster than 20 minutes Jay

There is an automatic disconnect after 20 minutes.? I saw a console command to adjust the time out but I can’t remember it right now.? I think setting it to 0 would make it never disco. I

I haven’t personally noticed it being slower but I have run into problems with the debugger losing its connection with the control system Jay

Is it just the site I'm working with or is Debugger noticeably slower/More sluggish (Iknow, I know...) with 4-series. I'm running a CP4 with v2.6 FW

Thanks Jon

Thanks Martin

Thanks.? I don't have access to an actual remote control but that is good to know. Jay

My unit is this: DIY-24-HP-C-230B

Hi Jay. I have at home two split inverters. Hisense HISI53WCO and Electra TRDI35. Both IR, both remotes work differently. The Hisense sends all the info on each change (mode, sp, fan, etc), but the

Best way to find out what wireless technology is used is to check the FCC ID on FCC.org.

Thanks Jon! Can you let me know what the model is? Thanks again Jay

The Mr. Cool unit in my my garage/gym has IR control. Not sure how the commands work as it seems to accept complex IR commands. for example you can turn it on and to a certain temperature with one

Does anyone know of a standard brand IR controlled window AC, Mini-Split AC, or Mini-Split Heat Pump?? I just need a make/model for some testing I'm doing.? When looking at models online it is

I'm currently torturing myself with this unit.? I know that there's been some varied discussions in the past... If there's anyone that has successfully dealt with this (or the 8 zone) that would be