开云体育

For clarity, flash retiring won't affect how these displays communicate with Crestron control - this conversation is about how to access AV gear's config webpages with a browser, correct? There's no

For anyone else in the same boat, I did some research this morning and I think I found a solution that will work. First I downloaded Firefox Portable at the link below:

Where can I find the complete list of commands? I'm trying to control an Eagle Eye director 2 directly from a processor (no polycom codec). It's via LAN, no rs-232 port.

Get a 3.5mm stereo mini extension cable and cut the female end off of it.? Connect the tip to the signal terminal and the shield to the ground terminal.? Now you can get an IR emitter and just plug

Sorry for the old link . . . ci.dm-holdings.com From: <[email protected]> on behalf of Slip Cougan <gk.otoole@...> Reply-To: <[email protected]> Date: Tuesday, November 24, 2020 at 4:24 AM To:

NM, just found it online. Will post in files.

Hello! Does anyone have any information on IP control of the NEC Multisync X554UN/UNV/UNS? Any help would be greatly appreciated.

I asked our Panasonic rep, apparently Japan is working on it. -- Jeffrey Franck, CTS, DMC-E-4K Audio/Visual Engineer Chief Emergency Building Coordinator Campus Media Services | WSU-TV Media Resources

Nice one, Thanks -s

Try this: http://user:pass@#.#.#.#/axis-cgi/mjpg/video.cgi?resolution=1280x720&compression=60&fps=10 (

As Steve said. Either stick with Xantech or Crestron emitters. Years of trouble free service with those. I've had cheap Chinese emitters (supplied by others) fail. -s

Can I receive these strings, I have a similar issue Thanks Andrea

I have had issues with certain brands of IR flashers not working.? In particular, some flashers cannot handle the current that Crestron delivers.? They may work to begin with but eventually

Sorry just to confirm any IR emitter even if not Crestron should worku? and not sure what you mean by socket could you send link of what that ?looks like Thank You Oil Country

Cut off the plug or buy a socket that has bare wires to the pro2. Cutting the plug is easier Sent from my mobile device, please ignore any spelling errors

Hi I have a Pro 2, from it via the Infrared serial output ports.? I had in slots A? DVD player, Slot B? PVR 2, Slot E PVR 1, Slot F? Sony Receiver, and finally Slot H a 4K player. They were all

Hi Heather, were you ever able to confirm MJPEG url structure for the Axis cams? This format (that you previously posted) works in a web-browser but I'm not getting a picture on TSW panels with it:

Support emailed me the link.

Just curious what to do about Roomview Connected Displays after support for Flash ends this year? I know Crestron is releasing updates for their equipment but have any projector manufacturers (namely

The following files have been uploaded to the Files area of the [email protected] group. * /Documents/Marantz_FY20_SR_NR_PROTOCOL_V01_20191104150702371.xls (