开云体育

There is a config published for NVX that you can use. Bear in mind that if you need to expand and use stacked switches that you will need to use only either AMS-4424P's or XMS-7048P's. Those are the

Unfortunately this "Summary & Workaround" doesnt really sound plausable........ Literally none of our jobs are using "sonos favourites".........

Many of the drivers I've written for articles have required json and I've made lots of mistakes trying to get my code to work. Just because json passes a validator doesn't mean it is in a format that

All, Control Concepts has developed a web-application that acts as a front-end for creating the JSON profiles that are required by the new Zoom Room Controls feature. It allows you to create the JSON

Summary & Workaround: https://support.crestron.com/app/answers/detail/a_id/1000806

check for recovery procedures, you have to press the reset button in a sequence like 11 or 12 times

I do use https://jsonlint.com/. When I run the json through the checker it validates but when the clients pushes the json file through the zoom portal it comes back with json config errors.? I sort

I have not customized the ZR UX but if you’re getting a JSON error usually, for me at least, throwing anything JSON at a JSON validator, like JSONlit.com is usually a very quick way to see where

You might try running your JSON file past https://jsonlint.com/.? It will check it for errors.

As the subject line indicates.? Zoom has come up with a way to add button (no feedback) to the Crestron TSW touch panel's Zoom app.? I am struggling with this as I keep JSON config file error every

Anybody have used this specific switch for NVX? is there anything I should know before hand? any recommendations? Any help would be greatly appreciated.

Yes I am blind.? The module was right there on BlueSounds website. But both last night and today, while there is BlueSound category listed on Crestron's Application Market, when I go to it, it says

Yes that is normal. The MSG light will come on whenever a message is written to the error log. A clean out of the box CP3 will do this as when it bots up there are messages written to the log- that's

Ditto, my laptop is a 4K display and my desktop is 3x >1920x1080 (but sub 4K) and I've seen the occasional scaling issue in other programs but can't say I've seen anything particularly horrid in SIMPL

I run it on 4k monitors and don't see any artifacting. Caleb Radecky | Manager, Online Products & Services Crestron Silver Certified Programmer | DMC-D-4K | DMC-E-4K ControlWorks Consulting, LLC |

Can?t confirm that. Running on a 5120x1440 screen without issues. Cheers, Thorsten Von: [email protected] <[email protected]> Im Auftrag von Dean Detton Gesendet: Sonntag, 4. Oktober 2020 18:02 An:

I have a problem with TSW-760 panel... After the firmware update, only the logo will be displayed. I waited a few hours, but still just the logo. I tried Restart or Factory Reset, but nothing helps,

Oops...sorry Brian, you beat me to it...

Guys...there is a BlueOS module in the store. ?Also it has no SiriusXM...

Feel free, Jason! The Simpl#, Simpl+, and User modules are there in the .zip file. I think the module should be pretty intuitive to use, but let me know if you run into any issues. Tim