¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Messages
Expanded Topics Messages Polls
Date
Re: Wake on PC from Crestron CP3 #crestron

 

I posted a program a while back to do this.?

/g/crestron/message/235476?p=,,,20,0,0,0::relevance,,wol,20,2,0,74539131
Re: Wake on PC from Crestron CP3 #crestron

 

I can WOL the PC from my laptop, but not able to turn ON it from Crestron controller. Subnet and IP are correct.?
Re: Wake on PC from Crestron CP3 #crestron

 

Please provide a bit more detail as to what issue you are facing.
File /Modules/TPLink_Switch.zip uploaded #file-notice

[email protected] Notification
 

The following files have been uploaded to the Files area of the [email protected] group.

By: Georges K

Description:
Simple module to interact with a TP-Link Kasa outlet. Tested with a HS105. Includes feedback (polling). Also D3 compatible.
Wake on PC from Crestron CP3 #crestron

 

Hi All,
I found a lot of help in this group and have some built programs for wake on Lan PCs. It would be helpful if someone able to solve the WOL issue and can help me with it.
Re: Crestron Pyng Hub - Firmware Upgrade Failure - Unresponsive

 

Whats the magic word for getting this to happened? I asked and they said its not possible.
Re: TSW-x52 non Crestron mac address

 

Sounds like it would be easier to request a fully-functioning and properly operating product from the manufacturer. Having a paper trail for things like this can help a manufacturer find production issues and make product and QC improvements. Crestron is a premium product. There's no reason one should?have to get hacky with it.?

Obviously in OP's case, he bought a used item off of eBay with no guarantees. But I can say if I ever saw one come out of the box with a botched MAC address (a non-unique one and a non-Crestron specific one), I'd send it back or ask TrueBlue to assist in correcting the issue.?
Re: Uploading CH5

 

Are you sure you have the latest firmware installed on the touch panel?
Re: VTPro resolution for premium/high end phones? #crestron #android #app

 

Thanks for the feedback guys!

Have a great day.
Re: Using a 2-series processor for KNX module development #crestron

 

Thanks for your feedback @marselle001

So a 2 series processor will do the job just fine then! (:
Re: TSW-x52 non Crestron mac address

 

i did that didn't worked out previously , even i swapped sd card from anther working panel , the panel did not worked .these 52 has this as common problem , if you are expert in smd soldering and desoldering you may have chance to replace the Ethernet chip looks like aluminium square ( i dont mean the RG45 ) and make shure you use pcb conditioner .
Re: Using a 2-series processor for KNX module development #crestron

 

one of the advantages of series 3 over series 2 if you want to make program just for lighting , and anther program for HVAC , anther program for shutter actuator and use the EIC between them? in single processor.so you can modify one while the other still working , idea : if you are going to do that using series 3 and you have many knx application (lighting, shutter...) keep the knx handler in separate program while the other program in different program slot , so once program got modified ,in other slot , knx communication remain active send and recieve with the other slot .
Re: Using a 2-series processor for KNX module development #crestron

 

series 2 will work perfectly , what i want to say , knx remain knx , since telegram remain telegram , what you can do in series 2 along with knx you can do it in series 3 unless you want to use your own s# .
IR File Needed (ZvSync Digital Cable Tuner)

 

Title kind of says it all, does anyone have an IR file for this tuner?
Re: Nest TStat Integration

 

CoolAutomation use to have the CoolMasterNet interfase, but also is no longer wirking.

In the home page this is what shows:

"NOTE: Google is in the process of migrating the "Works with Nest" program under the umbrella of Google Assistant, and as such is temporarily unavailable"
Re: Uploading CH5

 

Once again, thanks Neil! :-)

--- On Friday, June 26, 2020 at 4:24 PM, Neil wrote:

If Masters proved anything it's that Crestron's CH5 developers did not
understand the level their audience are at.
I spent some time working through CH5 and have managed to get a handle on it,
not using their old or new sample projects though.

It would seem that if they want this to take off they are going to have to put
some effort into training from the beginning or produce a VTPro like piece of
software that will generate the CH5 panel files.

Simpl is not going anywhere and looks like it's going to be supported well into
the future.
VTPro may well be another story, especially with the Flash sunset at the end of
this year...

There's some resources here, including some basic CH5 projects I've made that
may help others get a start with it;
Re: Uploading CH5

 

If Masters proved anything it's that Crestron's CH5 developers did not understand the level their audience are at.
I spent some time working through CH5 and have managed to get a handle on it, not using their old or new sample projects though.

It would seem that if they want this to take off they are going to have to put some effort into training from the beginning or produce a VTPro like piece of software that will generate the CH5 panel files.

Simpl is not going anywhere and looks like it's going to be supported well into the future.
VTPro may well be another story, especially with the Flash sunset at the end of this year...

There's some resources here, including some basic CH5 projects I've made that may help others get a start with it;
Re: Uploading CH5

 

This looks to me like they just don¡¯t want to develop their own tools anymore...
It's no secret, Crestron said it openly. I agree that the learning curve with these new tools is massive?but I also believe it is the right thing to do and it makes us better programmers. Also, SW and VTPro aren't going anywhere no need to panic really.
Re: Uploading CH5

 

¿ªÔÆÌåÓý

This looks to me like they just don¡¯t want to develop their own tools anymore...


On Jun 26, 2020, at 1:52 PM, Brian Erchenbrecher via groups.io <Brian.Erchenbrecher@...> wrote:

?Lincoln, I couldn't agree more. This is one of my biggest frustrations with Crestron, both from the standpoint of having worked in education in the past and because I didn't come into programming from a computer science background. I have worked my ass off to get where I am, and now to be on the receiving end of ¡°Here¡¯s this thing that we won¡¯t teach and likely won¡¯t provide support for¡± is extraordinarily frustrating. Forgive me, everyone, if I am projecting too much onto Crestron, but for me, a lot of their instruction seems to carry the attitude of "why don't you already know this?" In any event, there's a little reassurance in the fact that others seem to be in the same boat, and also that we have a great community of programmers who tend to support each other very well when True Blue doesn't. Thank you to all of you who go out of your way to offer help and guidance.

Re: Crestron with Somfy UAI+

 

I've only done one job with it, and that was 2 years ago. I haven't heard from that client since, so i'm under the assumption its still working. I'm doing a job now that has one shade controlled this way, so I'll watch it and see what happens.
20581 - 20600 of 256426