开云体育

Hi all, I need control the new version from Samsung Flip Monitor, (Flip 2 WM55R and WM65R). someone had a success to control? I can control to previews version, but not on this newer; The Datasheet

Weird.? For whatever reason a firmware update and reboot seemed to alleviate the problem.? Not sure if it has something to do with current software versions and previous firmware versions.? Hidden

Do you have a file that I can use as an example?

Would you be willing to share any of your setup? I had a full Insteon house with an ISY controller before I started working with Crestron and now I’d like to integrate the two, but I’ve never had

I have a different TV (LG OLED C8), but these are notes I took when I hooked it up: ? DB9 Pin 3 to 3.5mm Tip ? DB9 Pin 2 to 3.5mm Ring ? DB9 Pin 5 to 3.5mm Sleeve Also check out:

I have my CP3 talk to an ISY through REST commands. This allows me to control Insteon devices and scenes. I am also able to get some status feedback via query commands. Not very pretty, but it works

I am having a hell of a time trying to control some insteon lights. I attempted to use the lighting and thermostat module in the files section but it does not seem to compile in a 3 series program. Is

Hello, I have tried this module on a CP3N and it does not compile. There is an error on Line 86 of the module. I am guessing its a bit of cone that is not compatible with a 3 series processor. Has

Hello, I am interested if anyone has gotten this to work? I have a project with a bunch of Insteon dimmers to control.

Hi everyone, We are installing an LG display ( 86UH5E ) with RS-232 control through the 4-pin TRS connector. Does anyone know which connections on the display are TX, RX and Ground? Thanks, -andy

Looks like pages 4,5,6 have Refrigerator info!

We had something similar recently and it all devices would show up fine but I noticed an intermittent flood of update requests from a certain Cresnet ID. We swapped the keypad and our troubles went

The biggest difference (except for the group address count) is that You need a KNX guy every time You need to make a change on CI-KNX. This unit needs to be programmed on KNX side (ETS software). If

I have worked on a number of projects integrating with KNX using a CGEIB-IP, which seems to work pretty well. A few years back a Crestron employee suggested to me that we should always choose the

Ugh…. So close but just not quite ? -- several 12V options and a Lenovo 20V option that I could probably hack a new end onto and would probably work but nothing @ 24V Appreciate the offer but hate

Good luck. If you’re in need I stock a few in my basement for my system, I can give you a couple, but I’m a little further out from Vienna. Arrangements can be always be made so let me know. EJ

After doing some searching it looks like this might be a starting point http://opensource.lge.com/osList/list?m=Mc014&s= though I'm not seeing much for a refrigerator. I also checked and LG doesn't

Hmm… good call. I don’t usually think of Micro Center as a components house but they have gotten much better in recent years (at least the one near our Cleveland office – and I have been to that

Micro Center off Vienna Metro (Orange Line) might have what you need. Plus I think you can order online for pick up. EJ

I'm an idiot - I sent my wife a few boxes to get our apartment in DC up and running but apparently despite throwing a DM-TX-201 and RMC-100-C in the box with a plethora of each of them I apparently