开云体育

What are you guys using for controlling rgbww led lighting? ?Need IP hardwired or wireless not rs232 based.

But what do you do when it goes to sleep? I couldn’t find any command to wake up my Amazon Fire 4K (the first 4K box not the cube). When awake it was fine but I could wake it up after it went to

I believe you still get 0-100% but it changes thing internally. We have a system where the Qsys guy told me he is scaling internally but it behaves 0-100% for the Crestron side. Is that helpful?

I believe it works with IFTTT, maybe try that route.ChrisSent from my Verizon, Samsung Galaxy smartphone

https://bondhome.io/product/bond-bridge/ has anyone successfully integrated this with Crestron?? Trying to control a couple of MinkaAire fans.

Has anyone been able to control the Samsung Frame TVs?? Either RS-232 or IP is an option.? I downloaded the manual but it didn't mention anywhere in it about control.? I've used the exlink protocol

I always try to get a individual Ethernet connection for each Sonos back to the main switch.? Then I go into each Sonos device and turn off the WiFi AP in the Sonos. Sonos spanning tree protocol

Combination of a & b depending on circumstances for the install (number of spare switch ports for example). I did hear rumours years ago that c was a recommended thing, but I have a rule that if

Basically if you have 10 rooms you're controlling, use Dynamic Lists that have their data set dynamically in case each room has different sources. Using different logic folders for each UI would solve

There are many ways to create QR codes. Here is a free one ( https://www.the-qrcode-generator.com/ ) , where you could create a QR code for a link to the web page. Turn the touch panel into a

Hi All, Wondering what others are doing re: best practices regarding Sonos Connect/Port network connections.? Do you favor: a. individual net connections for each device (when possible) b. Direct

I built this several years ago when I couldn't find an example.? you will need to put the mac address in hex format i.e. 00:E0:6F:2B:AC:D1 would be like \x00\xE0\x6F\x2B\xAC\xD1

I built this several years ago when I couldn't find an example.? you will need to put the mac address in hex format i.e. 00:E0:6F:2B:AC:D1 would be like \x00\xE0\x6F\x2B\xAC\xD1

Thanks Dustin. I'll test that out.

Thanks @ Martin Philip and olivier_robert;? Yes, from the documentation it seems like it should work with the FF commands. However, my attempts thus far have been unsuccessful. The best I get is an

Thanks guys. I will try CEC.

Thanks @dblpnt; I will give this a shot.Can I simply install the older version 'on top' of the newer or is an uninstall of the newer one needed first?

I 2nd the vote for CEC in DM environments.? I have found FireTV CEC control solid after some earlier challenges? over the past few yearswith hangs with multiple commands being sent too often.

If I had to guess, those modules probably use the position value to generate feedback. That will always be 0.0-1.0 regardless of what the actual gain range is set to. I'm not aware of a way to get the

With the campus on the verge of starting to re-open after being closed for the pandemic, we were thinking of ways to keep people safe.? Touch panels in the classrooms will be a major issue. So, I was