开云体育

The processor can handle multiple, but best would be to create one UI that can handle multiple users. So create your vtp file with variable lists/buttons and have separate instances in simpl windows

I have a FireTV stick in the back of a DM 8x8. I control it using the Crestron "Generic CEC Source Control" module. It took a bit of trial and error to get the Address parameter correct. For me it was

Have multiple IP IDs and instances of the Crestron App in your program, and have each user use their own IP ID. All will use the same UI loaded to the processor.

I have changed 1050s/750s into 1052s/752s by writing an image I was able to pull from a xx52 panel and using Win32 Disk Imager. Ive done like 5 or 6 and never had to do anything with a mac address.

Hi, is there a way to control the Chromecast with Crestron?

Hi, is there a way to control the FireTV stick with Crestron?

Good morning guys, I hope you are keeping safe! I'm currently working a project that has a very intricate GUI design (Crestron App) being driven by SIMPL Windows logic. But it just occurred to me that

OLH 4403 =?Using Wake On LAN (WOL) to turn on a PC from a Control System https://support.crestron.com/app/answers/detail/a_id/4403

Does anyone know how the Appllication Market Q-Sys modules are able to scale volume feedback based on the max & min levels set in Q-Sys Designer? I don't get any response when requesting metadata

Hello, I can't help you for Netflix and other high level services. Maybe you can try https://sites.google.com/site/brendanrobert/projects/bits-and-pieces/lg-tv-hacks, there are extra commands listed

Dear Dean, Thank you. The module working perfectly. The same functionality I was looking for. Regards, JK

Dear All, kindly Tell me. I have one Trinnov device i want to use wake on lan to on device. How can i use Wake on Lan in my simple window any idea. Plz tell me? and what is the processor of doing

Dear all, I have trinnov system I want to use wake on lan to On device can you plz help me how to use wake on lan in simple programming window Thanks Rajat Dwivedi

You should get the LG 2018 module working again by downgrading SIMPL to 4.11.06 and DevDB 115. DevDB 116 was pulled because of the issues with CCDs and if you don't need to program a 4-Series I would

That is definitely the case for the Sony’s. The rs232 and simple ip control doesn’t have the capability to launch apps. Hope you can work it out for the lg. On the Sony I had to write my own simpl

Ahh, I think I understand what you are saying....I might only be able to launch these services as part of the webOS (http) and there might not any RS232 commands available. Hmm, if this was the case,

I don’t know about LG webos sorry. On Sony you need to send commands directly to androidTV to launch specific apps via http requests. Maybe webOS has a similar high level API

I am looking for the RS-232 commands for the TV's build-in streaming services; in particular for Netflix and Amazon Prime. I got all the other commands working. During my search I found a pretty

If it's a Homeworks QS system, you can use the protocol manual. But it's much easier just to use a Lutron-provided module for Crestron that integrates with Lutron. Using the module, you don't really

Give the "SerialStringQueue.usp" file I just uploaded to modules folder a try. I haven't tested it, but I believe the general mechanics of what you will need are there.