开云体育

Good to hear the factory reset got the IP control working.? I have only controlled Sony TVs via SIMPL.? So I have no idea why OS3 doesn't work.? Sorry. Good luck, Steve

Tyler , do you have anymore information about the timing you had to deploy? I will try again in the next few days when I get back in front of the System. But any information you might have would be

Hi Steve, Factory reset did the trick, just no luck with Crestron Home OS3.? ?Off to getting a packet capture.

I am able to control using a tool called packet sender, but still no luck with Crestron Home, I guess it's time to do some packet captures. :(

I’ve not done NVX across trunked links where I’m responsible for the network config but my gut is saying that this would be a good idea and a quick Google isn’t turning up documentation that

Thank you, I will give that a try.

I have had issues with something getting corrupted in the Sony while all the settings are correct.? I've fixed that issue in the past by doing a factory reset on the Sony TV and then setting it up

I am setting up a DM-NVX configuration where the DM-NVX devices for the media sources (Kaleidescape, Apple TV, DirecTV, etx) will be connect to Cisco 2960-X switches, the TVs will be connected to my

I think I got mine off of the marketplace. I have had problems with it too. I got it to connect but I had to play with the initial connection timing

I am trying to setup a Sony XBR-55X930E with Crestron Home using the IP Smart TV control device driver and apparently I am missing something. I have done the following: * Confirmed I can ping the TV.

Thanks alot, Looks cool but so far just keep getting error "Error Opening File Store = -3024"? no saving or recalling.

Hi Nirav Did you eventually integrate with CRESTRON the Dahua Intercom? If so can you please send me the driver All the Best Michael

I have a DMPS3. So that shouldn't be the issue.

I have used it.? The module only work on series 3 processors. Thanks, Jason Sent: Sunday, April 19, 2020, 12:07 PM To: [email protected] Subject: [crestron] Epiphan Pearl Module Good Afternoon. Has

Good Afternoon. Has anyone used the Epiphan Pearl module from the marketplace? I tried to implement it but I am getting the following error in Debugger "Issue communicating with device - Unexpected

something like the file in files group : /g/crestron/files/Modules/Write%20and%20Read%20Variables%20From%20File%20v2.3.zip i learned from this module a bunch .

Checked it out I already have similar module but the program I have is already setup using the Crestron Text Entry for 25 Fields,? I am involved with a lot and don't have the time to do willing to

Right seth, nowadays you can even find DIY, open source stuff that works better than professional solutions. For a nice stand alone stream display find "displaycameras" on github. Took me 30 min to

Thanks, John. Unfortunately I only find IR driver items on that site.? I must be doing something wrong (though I'm searching for IP devices...)

I've done a few projects with the MicroSemi units and they seemed to work fine. 1. As I had mentioned in another post, you will need to use shielded CAT cable for grounding of the End-points - OR