开云体育

Check on Crestron labs, the module developer is quite active on replying to bug reports

Physically, yes. Logically, no. You just define it as a “normal” IP device and manually configure the IP table. -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D Commercial Market Director Sr. Systems

Strange, I'm guessing there's a semi-public beta channel but 9.6 just came out publicly including 9.6.1 just yesterday. If you can get more info I (and others I'm sure) would be interested. Any ideas

Hi All, Can you add a DM-DGE-200-C to a DM output? Don't see that as an option in SIMPL Windows.

The system actually shows Rooms 2018-12-19 on the Touch10, but when I asked the client to check the SX80, they sent me an email with ce9.7.0.54ac0f80a97

The latest public firmware is 9.6 from what I see. Where do you see 9.7 or the release notes for it?

Ya, I had a feeling you would say that. I was not able to find anything either. Interesting that Apple does not give a method to press that button in any way but on the Siri remote itself. Thanks

So it seems that Crestron Rooms 3.x will not work with Cisco CE 9.7 firmware. Anybody else run into this situation and what are you using for modules to communicate? Thanks, JC

I have two Samsung TVs with One Connect boxes (one about 2 years old the other about 3). Both lose audio but do video fine. First is on an 8x8 DM HDMI output but runs over Category baluns. It's hit

Makes sense, but press and hold versus pressing the hold button would be 2 different commands with the protocol being used in this module and I haven't seen any mention of an available command for

I currently use it to put the Apple TV to sleep and subsequently, the attached TV via CEC. if you press and hold the HOME button on the Siri Remote, it will pop up a screen that asks "Sleep Now?"

What does the Home button do? If it always brings you to the main AppleTV menu where you select an app, then the Top Menu command seems to do that. I've been baking in the changes I made to Ryan's

The HDMI and VGA inputs on the 50/100/150 are not paired (unlike the DMPS-300-C-derived products) so HDMI 1 and VGA 1 are not at all related. Lincoln -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D

Does anyone know if it is possible to emulate the Home button? I am currently using Ryans module.

Heather, I just emailed you an older XBR protocol document that contains discrete aspect commands, in case they'll work with the new models. timer, seconds

I don't think I've encountered that with Sony, mainly because I rarely put an aspect button on interfaces any more. However, I ran into something similar with a different brand several years ago. I

We have a few Sony XBR-55A8Fs being installed and the field guys are telling me that my "aspect" button is bringing up on onscreen menu. LGs typically do this, but I haven't seen a Sony do this. I'm

I think it will select the last plugged in device. If not, then yes - HDMI is chosen over VGA.

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Crestron group. File : /Modules/Get My IPgeo v1.0.usp Uploaded by :

Thanks Tom. I've done that (enable the ECAPI flag and get the password) but the Crestron module doesn't seem to want to communicate with the device, although I can enter the auth command in a web