Re: How do I download from a TouchPanel?

Michael S. Moran

开云体育

Not exactly the case. You can replace the EXACT panel type with the Vtz compiled file and it should work perfectly. You will not be able to do any edits, however.?

Best regards,

Michael S. Moran

Show quoted text

On Jan 22, 2016, at 16:37, CJ ONeill COneilliv@... [Crestron] <Crestron@...> wrote:

?

A quick followup question- I guess that would mean that you couldn't replace a touchpanel without the original programming?

-----Original Message-----
From: steve@... [Crestron] <Crestron@...>
To: Crestron <Crestron@...>
Sent: Fri, Jan 22, 2016 3:49 pm
Subject: [Crestron] Re: How do I download from a TouchPanel?

?

You can't pull a vtp or vtz from legacy panels. ?The only thing you can do is copy all the files from the file system, but I don't think it will work properly if you stuff them back in after loading another project.?

Re: VTPro Smart Graphics project Error

[email protected]

#210628

Hi all!

Where exactly on the Crestron website can I find document ID 5610?

Thanks!

Cheers,

Pieter

Re: How do I download from a TouchPanel?

#210627

A quick followup question- I guess that would mean that you couldn't replace a touchpanel without the original programming?

Show quoted text

-----Original Message-----
From: steve@... [Crestron]
To: Crestron
Sent: Fri, Jan 22, 2016 3:49 pm
Subject: [Crestron] Re: How do I download from a TouchPanel?

You can't pull a vtp or vtz from legacy panels. ?The only thing you can do is copy all the files from the file system, but I don't think it will work properly if you stuff them back in after loading another project.?

Re: How do I download from a TouchPanel?

#210626

Thanks.? I appreciate the help!? I would think that the only way the original program would work after loading another project would be if I had all of the same joins in the new TP pages, which is pretty much an impossibility.

Show quoted text

-----Original Message-----
From: steve@... [Crestron]
To: Crestron Sent: Fri, Jan 22, 2016 3:49 pm
Subject: [Crestron] Re: How do I download from a TouchPanel?

You can't pull a vtp or vtz from legacy panels. ?The only thing you can do is copy all the files from the file system, but I don't think it will work properly if you stuff them back in after loading another project.?

Re: Mitsubishi G-50/AG-150 HVAC controller

[email protected]

#210625

Did the HVAC installer enable the 'special' features.
Honestly can't remember what they have to enable as the last time I did one of these was about 5 years ago. But it would not work without these features enabled.
If anyone one can remember what features have to be enabled by the commissioning engineer kindly post on here so I can make a note for when this will come back and bite me.

Re: Smart Graphics - Button List

#210624

Yes you can do what Heather showed with current Smart Graphics button lists.

Re: How do I download from a TouchPanel?

#210623

You can't pull a vtp or vtz from legacy panels. ?The only thing you can do is copy all the files from the file system, but I don't think it will work properly if you stuff them back in after loading another project.?

Re: Security and back doors

#210622

I've been looking for vulnerabilities in that thing since it came out...as long as you've set up security, you're pretty good.

The default assumption that just because it is windows that it is automatically vulnerable is an asinine and ignorant one. ?An embedded OS is way different than the version of the OS you're running on your PC right now, not to mention it eliminates third party applications and the user space completely, which are the biggest threat vectors.

Mitsubishi G-50/AG-150 HVAC controller

#210621

I'm currently working on a project with an AG-150, and the modules I used a couple of years ago on another project don't seem to work.

I'm using the?"Mitsubishi G50 Master v1.0" and?"Mitsubishi G50 Group v1.0" modules, which are the latest in the Application Market, and they worked successfully on an earlier project. ?The former module handles the ethernet connection to the Mitsubishi controller, and the latter is used for each unit that needs to be controlled. ?I've double-checked all of the IDs (Group numbers) with the HVAC contractor, but still can't control or get feedback from any of the units. ?However, the Master module's status says "connected".

Has anyone else tried these modules recently, or have any ideas?

Thanks in advance.

Re: HVAC BACnet and 'global' settings

[email protected]

#210620

Heather, in my experience it really depends on the BACnet unit you're interfacing to and the number of BACnet objects you need to blast.

Not a cut and dry answer I'm afraid. It's always preferable to have as little BACnet data transferring back and forth - if your HVAC programmer can add an object purely for home/away and process the data themselves that would be ideal.

Other than the above, I've found BACnet integration easy to deploy and commission, very reliable and very quick in terms of end user experience. It's very snappy. Ensure your Crestron processors are on the latest firmware as there's been a bunch of BACnet fixes in the last few versions.

Hope that helps.

Re: MP3 Player with digital input triggers

#210619

I bought one of these years ago and never got around to actually trying it out. ?Can't beat the price, though!?


			MDFLY is a trusted online retailer that offers electronics goods at incredible prices. We offer a array of high quality goods including training, evaluation, de...
				Preview by Yahoo

?

Re: Security and back doors

#210618

I would not be surprised if Crestron has a similar back door. maybe one they don't even know about-? especially in the 3-series Windows based stuff. We'll see....

Re: Smart Graphics - Button List

[email protected]

#210617

"That's exactly what I'm looking to do. Is there a way to do this using only existing Crestron tools or do I need to write HTML code as previously stated by Keith?"

Times I've needed something like this, I've done what was previously suggested - have a button trigger a sub-page that contains your list of selections.? Picking a selection from that list closes the sub-page and optionally updates the text/icon on the button that calls it up.

? - Chip

Re: MP3 Player with digital input triggers

[email protected]

#210616

"I've seen this kind of thing asked about in the past and just received a mail shot which I thought some might find interesting..."

That looks like hella fun.? Just need an enclosure with some of those oversized soft rubber buttons on it now.

? - Chip

Re: Smart Graphics - Button List

[email protected]

#210615

That's exactly what I'm looking to do. Is there a way to do this using only existing Crestron tools or do I need to write HTML code as previously stated by Keith?

Re: How do I download from a TouchPanel?

#210614

Thanks!? A compiled version is all I need so that I can re-upload them if I have some issues with my program built off of an earlier version. I did download the compiled program from the Pro2, but don't see an option for doing so in Toolbox for the touchpanels (TPS-4L's, 6L's and TPMC-8X's).?

Show quoted text

-----Original Message-----
From: lenrex@... [Crestron]
To: Crestron
Sent: Fri, Jan 22, 2016 11:25 am
Subject: [Crestron] Re: How do I download from a TouchPanel?

You should be able to download 'compiled' archives from the touchpanels or processor. You most likely will not be able to modify them without the actual 'uncompiled' source code.

Re: GLS EM MCU somebody did it work?

#210613

Contact Crestron Support (FSG@...)

Show quoted text

On Thu, Jan 21, 2016 at 9:06 PM, jek_acosta@... [Crestron] <Crestron@...> wrote:

?

anyone?

Re: Its time to replace the desktop PC.....

#210612

Thanks Floyd, good input!

Okay well I've taken the plunge, here is the spec:

Asus Z170-E Intel Z170 (Socket 1151) DDR4 ATX Motherboard

Intel Core i7-6700K 4.0GHz (Skylake) Socket LGA1151 Processor - OEM

Corsair Vengeance LPX 32GB (2x16GB) DDR4 PC4-24000C15 3000MHz Dual Channel Kit - Black (CMK16GX4M2B30

Samsung 500GB 850 EVO SSD 2.5" SATA 6Gbps 32 Layer 3D V-NAND Solid State Drive (MZ-75E500B/EU)

BitFenix Alchemy Premium Modding LED Strip - Connect Red 60cm

Microsoft Windows 10 Pro 64-Bit DVD - OEM (MS-FQC-08929)

Aerocool GT-A Window Midi-Tower - Black

Akasa AK-CC4009EP01 Venom Pico Compact CPU Cooler

be quiet! Pure Power L8 600W '80 Plus Bronze' Power Supply - With 120mm Silent Wing Fan Built in

MSI GeForce GTX 950 OC 2048MB GDDR5 PCI-Express Graphics Card

?

All the above for ?1200 inc VAT

The i7 and memory upgrade added about ?200 over the i5 version so I thought it was rude not to!!

And yes you did see correctly, there is a red LED strip to light up the inside as the case is windowed (I know, I know...!).

Will be running 2x Philips 4K 40" monitors.?

7 days lead time so hopefully in 10 days I will again be a happy bunny and not swearing at my screen whilst waiting for things to happen......

HVAC BACnet and 'global' settings

Heather Baiman

#210611

开云体育

I know that if I create some HVAC presets, ie. Home or Away, with Crestron TSTATs that I can send the commands to all stats at once with no issue.? With CoolMaster, Daikin, Mitsu systems I have to use a macro/stepper.

?

Since the BACnet stats are all on independent points/objects, do I need to use a macro/stepper here or can these systems handle a 'blast' command?

?

This is my first BACnet project, so I have no experience to draw upon.

?

Heather Baiman, Head of Programming

Electronic Environments Inc.

247 W. 37th Street, Suite 704, New York, NY 10018

Phone: 212-997-1110 | Extension:125

?


============================================================================
Please refer to http://www.eeny.net/disclaimer.txt
for important disclosures regarding this electronic communication.
============================================================================

Re: How do I download from a TouchPanel?

#210610

You should be able to download 'compiled' archives from the touchpanels or processor. You most likely will not be able to modify them without the actual 'uncompiled' source code.