Re: Genie 4K box with Crestron HD MD switcher

#210636

If it hasn't already been suggested, put a HDFury integral in between the directv box and the DM

Sent from my pocket computer

infiNET EX and wireless routers

[email protected]

#210634

Is it ok to place MC3 beside a wireless router? will there be interference?

Re: Genie 4K box with Crestron HD MD switcher

Heather Baiman

#210633

My guess is the HD-MD6x2-4k-E is not HDCP2.2 compliant
________________________________________
From: Crestron@... [Crestron@...]
Sent: Friday, January 22, 2016 8:33 PM
To: Crestron@...
Subject: [Crestron] Genie 4K box with Crestron HD MD switcher

Guys I have a situation where this client request the genie mini 4K clients and today we connected to Crestron HD MD 6x2 4K ready but it won't pass the 4K content when testing but will pass it when connect genie box directly to tv .

Any suggestion ?

------------------------------------
Posted by: mingomaster@...
------------------------------------

Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.

------------------------------------

Yahoo Groups Links

============================================================================
Please refer to 
for important disclosures regarding this electronic communication.
============================================================================

Genie 4K box with Crestron HD MD switcher

#210632

Guys I have a situation where this client request the genie mini 4K clients and today we connected to Crestron HD MD 6x2 4K ready but it won't pass the 4K content when testing but will pass it when connect genie box directly to tv . 

Any suggestion ?

Re: SIMPL# Pro and Sonos

#210635

Hi Tzyata,

Do you have the Sonos module available for download by any chance?

TIA

Show quoted text

On Wed, Jan 20, 2016 at 1:12 PM, David david@... [Crestron]
wrote:

?

Hi tzyata,
where can I get that sonos module you are refering to? Does it support Pandora or Spotify natively on ProG?

Regards, David

On Wed, Jan 20, 2016 at 6:27 AM, tzyata@... [Crestron] <Crestron@...> wrote:

?

we have simpl+ module that works well for the last 2 years

Re: Security and back doors

Paul Armbruster

#210631

I believe the assumption was that the 3 series Windows stuff is a lot more capable and, given the propensity for Crestron to hide functionality, it seems fairly likely. Does "all your base are belong to us" sound familiar?

Show quoted text

On Fri, Jan 22, 2016, 1:42 PM?geauxtig3rs@... [Crestron] <Crestron@...> wrote:

?

I've been looking for vulnerabilities in that thing since it came out...as long as you've set up security, you're pretty good.

The default assumption that just because it is windows that it is automatically vulnerable is an asinine and ignorant one.? An embedded OS is way different than the version of the OS you're running on your PC right now, not to mention it eliminates third party applications and the user space completely, which are the biggest threat vectors.

Re: VTPro Smart Graphics project Error

Andrew Welker

#210630

It's in the online help section.

Show quoted text

On Fri, Jan 22, 2016, 5:11 PM?pieterjan.delbecke@... [Crestron] <Crestron@...> wrote:

?

Hi all!

Where exactly on the Crestron website can I find document ID 5610?

Thanks!

Cheers,
Pieter

Re: How do I download from a TouchPanel?

Michael S. Moran

#210629

开云体育

Not exactly the case. You can replace the EXACT panel type with the Vtz compiled file and it should work perfectly. You will not be able to do any edits, however.?

Best regards,

Michael S. Moran

Show quoted text

On Jan 22, 2016, at 16:37, CJ ONeill COneilliv@... [Crestron] <Crestron@...> wrote:

?

A quick followup question- I guess that would mean that you couldn't replace a touchpanel without the original programming?

-----Original Message-----
From: steve@... [Crestron] <Crestron@...>
To: Crestron <Crestron@...>
Sent: Fri, Jan 22, 2016 3:49 pm
Subject: [Crestron] Re: How do I download from a TouchPanel?

?

You can't pull a vtp or vtz from legacy panels. ?The only thing you can do is copy all the files from the file system, but I don't think it will work properly if you stuff them back in after loading another project.?

Re: VTPro Smart Graphics project Error

[email protected]

#210628

Hi all!

Where exactly on the Crestron website can I find document ID 5610?

Thanks!

Cheers,

Pieter

Re: How do I download from a TouchPanel?

#210627

A quick followup question- I guess that would mean that you couldn't replace a touchpanel without the original programming?

Show quoted text

-----Original Message-----
From: steve@... [Crestron]
To: Crestron
Sent: Fri, Jan 22, 2016 3:49 pm
Subject: [Crestron] Re: How do I download from a TouchPanel?

You can't pull a vtp or vtz from legacy panels. ?The only thing you can do is copy all the files from the file system, but I don't think it will work properly if you stuff them back in after loading another project.?

Re: How do I download from a TouchPanel?

#210626

Thanks.? I appreciate the help!? I would think that the only way the original program would work after loading another project would be if I had all of the same joins in the new TP pages, which is pretty much an impossibility.

Show quoted text

-----Original Message-----
From: steve@... [Crestron]
To: Crestron Sent: Fri, Jan 22, 2016 3:49 pm
Subject: [Crestron] Re: How do I download from a TouchPanel?

You can't pull a vtp or vtz from legacy panels. ?The only thing you can do is copy all the files from the file system, but I don't think it will work properly if you stuff them back in after loading another project.?

Re: Mitsubishi G-50/AG-150 HVAC controller

[email protected]

#210625

Did the HVAC installer enable the 'special' features.
Honestly can't remember what they have to enable as the last time I did one of these was about 5 years ago. But it would not work without these features enabled.
If anyone one can remember what features have to be enabled by the commissioning engineer kindly post on here so I can make a note for when this will come back and bite me.

Re: Smart Graphics - Button List

#210624

Yes you can do what Heather showed with current Smart Graphics button lists.

Re: How do I download from a TouchPanel?

#210623

You can't pull a vtp or vtz from legacy panels. ?The only thing you can do is copy all the files from the file system, but I don't think it will work properly if you stuff them back in after loading another project.?

Re: Security and back doors

#210622

I've been looking for vulnerabilities in that thing since it came out...as long as you've set up security, you're pretty good.

The default assumption that just because it is windows that it is automatically vulnerable is an asinine and ignorant one. ?An embedded OS is way different than the version of the OS you're running on your PC right now, not to mention it eliminates third party applications and the user space completely, which are the biggest threat vectors.

Mitsubishi G-50/AG-150 HVAC controller

#210621

I'm currently working on a project with an AG-150, and the modules I used a couple of years ago on another project don't seem to work.

I'm using the?"Mitsubishi G50 Master v1.0" and?"Mitsubishi G50 Group v1.0" modules, which are the latest in the Application Market, and they worked successfully on an earlier project. ?The former module handles the ethernet connection to the Mitsubishi controller, and the latter is used for each unit that needs to be controlled. ?I've double-checked all of the IDs (Group numbers) with the HVAC contractor, but still can't control or get feedback from any of the units. ?However, the Master module's status says "connected".

Has anyone else tried these modules recently, or have any ideas?

Thanks in advance.

Re: HVAC BACnet and 'global' settings

[email protected]

#210620

Heather, in my experience it really depends on the BACnet unit you're interfacing to and the number of BACnet objects you need to blast.

Not a cut and dry answer I'm afraid. It's always preferable to have as little BACnet data transferring back and forth - if your HVAC programmer can add an object purely for home/away and process the data themselves that would be ideal.

Other than the above, I've found BACnet integration easy to deploy and commission, very reliable and very quick in terms of end user experience. It's very snappy. Ensure your Crestron processors are on the latest firmware as there's been a bunch of BACnet fixes in the last few versions.

Hope that helps.

Re: MP3 Player with digital input triggers

#210619

I bought one of these years ago and never got around to actually trying it out. ?Can't beat the price, though!?


			MDFLY is a trusted online retailer that offers electronics goods at incredible prices. We offer a array of high quality goods including training, evaluation, de...
				Preview by Yahoo

?

Re: Security and back doors

#210618

I would not be surprised if Crestron has a similar back door. maybe one they don't even know about-? especially in the 3-series Windows based stuff. We'll see....

Re: Smart Graphics - Button List

[email protected]

#210617

"That's exactly what I'm looking to do. Is there a way to do this using only existing Crestron tools or do I need to write HTML code as previously stated by Keith?"

Times I've needed something like this, I've done what was previously suggested - have a button trigger a sub-page that contains your list of selections.? Picking a selection from that list closes the sub-page and optionally updates the text/icon on the button that calls it up.

? - Chip