开云体育

Anyone know of a way to change the Crestron logo on the screen to a custom logo or graphic? Aaron

+1 Very well said. Especially #2 - I remember even before there was a Remote Central, using a Crestron learner and pulling discreet power codes off of a Sony receiver remote for every Sony device.

This is a good thread, should be a "sticky" or a "read, inwardly digest and be prepared to answer questions on it" for all new members. It's always worth trawling the manufacturers "Support" or

I'm a fan of the Chief PAC-516 for most TVs, but they offer several different models depending on your specific needs. Sturdy, reasonable price, readily available, full complement of

Wow, I missed the fun post. Yeah, cert specific questions are touchy, I am more upset with crestron for giving more time to get the test done and using the old test with passing it out before some

I saw something over CEpro website, white vented box for exactly this devices. bad part for me is that constructions in Puerto Rico is 95% concrete walls. -- *Jesus Tossas* * * *Technology Architect,

Anyone know of a good pre construction box with enough recessed area to preferably house Rmc boxes and power supplies. Sent from my pocket robot!

use the one that crestron provides with the database. it will work better and longer than any scrapers out there.

Use the crestron scheduler module and call it done. They have had one in the base crestron modules for years.

If I can add to the "be more resourceful" Every programmer should have or have access to an IR Learner whenever they're programming, onsite or off. The new learner is tiny and cheap, and there's

I've seen some threads getting rather testy lately and I thought I would post some helpful hints to help others avoid feeling internet wrath. 1. Do NOT post with questions or requests for help on

Yep, reading comprehension fail on my part for not seeing the V24/DGE2 callout in the OP. The next question is to look at what's going on in the system that's different between the two pages and that

No... Or at least not yet - at least not in the sense that I believe you're asking - did someone tell you otherwise? - Chip

It's a V24/DG2E on hardwired Ethernet. The Volume Up/Down buttons are steered to the various rooms by an "Adagio (AES) Large TP Room GUI Interface v2.4" module. All other rooms act OK on the same

@OP Try sampling the analog going *back* to the panel. This has solved runaway volume issues several times for me. Here is one way to do that: In the simpl program, take the analog feedback signal and

What type of panel & what communication method (Infinet EX, WiFi, Cresnet, Wired Ethernet)? It sounds like intermittent communication between the panel and the processor, so that the processor sees

I have a project that is using an AV2, an AES, iServer, V24/DGE2 and a ton of lighting stuff. The initial program was written in SB (never again), but due to a huge number of problems SB generated, I

3-Series does HTTPS without a problem, right? RIGHT?!?

Thanks fo reply. Maybe google calendar is too much complex, to design what i need. I need to make scheduler that works every monday, first and third week in the month, and must be editable. So, maybe

can anyone help? when trying to upload to an aads via system builder i recieve this message what does it mean? type mismatch