开云体育

No i'm controling the sound bar stand alone with a sony TV

You could have presented that request to far worse audiences, too - y'know. :) - Chip

Hi guys, I am looking for a place to buy 3.5mm terminal blocks online... mostly 3-position for audio, not 4-position for Cresnet/DMnet. I found http://www.easyadapters.com, and their prices look good,

Since I have one sitting on the shelf, I think that I will use an mBed (http://mbed.org/) controller. Development is in C with a nice Web based UI/IDE. I can use a PC for the front end. That way, one

We also have clients that would prefer Sirius to XM, because it is what they already have. We have used the Sirius SRH-2000 on a few jobs via RS232. Using the module in SIMPL. Upon occasion, the

Thanks Chip, that's a relief to hear. I do try to verify the program as much as possible before heading down to site.

Demo program? There's your problem! :) Kidding... But seriously, I have the C90/60 module (serial v1.3) running in a client's system with a C40, and the "Presentation_Near_End_Stop" input does exactly

Great point Jeremy. Unless the USB device he is using is necessary for some reason or you really need ethernet or some other high level hardware abstraction, then an RTOS isn't even needed or

I noticed on the demo program that it says C90 only, now that could be for sending sources 3 - 5 only. Also, when I ran the program I watched the output strings, and the module would not send a "stop"

I haven't done this, but I would make two pop-ups, each with a bargraph for one of the displays, then use some analog compare logic to show A) when *both* are warming up, that B) the one with the

Just curious - when you say "but not on the C60" - it's missing from the remote? I didn't think the differences between the two would affect the presentation functions... - Chip

System has two displays that may or may not power up at the same time (depending on source selection). I would like to call up one "warm up" page with a bar graph to illustrate progress (when either

C2N-TXM. CEN TRACK if you want to waste their money duplicating things they already have! XM / Sirius are the same. Heath Volmer Digital Domain Systems (303) 517-9714 [Non-text portions of this

Hello, Did you find a good solution for this I have the same problem now. Any help would be greatly appreciated. Thanks, Leo

Thanks, Ross. I finally got a reply to an email I sent someone fairly high in DW's tech support, and he says the firmware must be upgraded to version 1.2.1.1.56. I should know if it works, sometime

I forget which model it was one slightly older Sony model I came across (x2) using a DM system got rather tempermental trying to switch to Input D based on what kind of (res) signal was present. IIRC

Hey guys new to Crestron programming here, i'm doing my first program and i'm having problems controlling a receiver (STR-KS370) i heard you can use the same driver for Sony products and some others,

xCommand Presentation Stop\n

How does a person stop sending a presentation source to the far end? On the C90 there is a function for this, but not on the C60. To stop presentation would I need to send it no content?

No promises, but you might try: \xA9\x00\x01\x00\x00\x05\x05\x9A