开云体育

Zing , its only 15minutes !

At least until it crashes and you lose 14 minutes of work... <zimmerman.joshua@...> wrote:

One of my clients has been using the Sony BRC-H700 with HFBK-HD1 card for cameras and the Panasonic AV-HS450N for switching. Both work very well. -- Lincoln King-Cliby, CTS Sr. Systems Architect |

this is a known issue @ Crestron, set your Autosave time to 15 minutes this will temp fix the issue and allow you to work. -- Joshua B Zimmerman The beginning of knowledge is the discovery of

So... no recommendations for HD PTZ cameras for Capture HD? Not easy to find the right one, and now the customer wants 2 cameras and the ability to switch between them. I wish Capture-HD-Pro had a

Some of the Mitsubishi units work with BACnet (which uses RS-485). I've seen the protocol specification or a module on here (if you don't see it, e-mail me), so you may be able to roll-your-own

Sorry to drag the thread out from the grave, but we are now seeing a similar problem with IP controlled EYE-12. Did you ever find a solution to your problem? Thanks, David

We have also discovered the freeze issues when working with the DMPS-300. We have concluded that it's caused by the OOTBF. I've also noticed that back in the day when working with the MPS-300 (QM),

I think when I first found it my conclusion is that it's a problem to some extent with anything that has OOTBF, but it's orders of magnitude worse with the DMPS. No problems whatsoever programming

I have been using Symetrix Matrix Automix DSP's for my mixers. The Symetrix control protocol was well done with Crestron in mind. Good automatic feedback, volume ranges from 0-65535, etc.

I am a little wary of the AppleTV route incase of a firmware update that kills the control functionality. If I need their MMS-2 box to make this work reliably, then that's fine.

Hi all, I have an aging BiAmp VRAM rack mount mixer that seems to have some failing input stages. Can anyone recommend a crestron-controllable rackmount mixer capable of at least 6x2 ins/outs? Jon

The Autonomics MMS-2 or their Apple TV module to control iTunes right from a PC.

Have a client with a pool house. Stage one heating done with radiant from geothermal (same as system in house where we currently use, but has geo cooling, too) Secondary heating and first stage

Basically a hardware device that can go through a network to find and play music files in an iTunes library. Sonos player can do this, but they do not have any control features. I need to design a

I'm not sure what you mean by "Sonos style" but the Autonomic MMS-2 sounds about right.

Is there a Sonos style player out there that can play iTunes music files that is RS-232 or IP controllable? All I need is to be able to play audio files in one zone or area of a building. Thanks.

Hi, Yes, and no. I found a work-around, but not the source of the problem, and thus not a full solution. The ONLY way that I have been able to resolve this problem on this site was as follows: 1. Set

Hi, I would just add that you can have a video window in the Crestron Mobile app, but only in the Pro version. This is one of the limitations of the Free version. Regards, Marko

Hi all, I did the Systembuilder training last year but as we all know that doesn't quite cover the possibilities of all Crestron equipment. I will follow the SIMPL training later this year, but really