开云体育

I personally use Shelly ( https://www.shelly.com/en-us/products/shop/shelly-plus-add-on ) products with great success. While not an IO connection as requested, the cost is very reasonable and the

I do not want to use the cresnet. I am trying to use LM35 but not getting proper readings from the IO port of the CP4. It will read in mV range. 10mv = 1 cel and 250mv is 25C but when connected to the

Not Yet, I sent to him. But the problem is they Thermostat unit is having two IPs. So he is suggesting that he will change the object ID for thermostat.

Anyone integrated with these units? I have a client with (4) outside units that we'd like to tie in to his system... It looks like they're BT but they have an app...

Has anyone tried to create a "dummy" HVAC integration element on the Lutron side and then send/receive data with it? The application is that I have some software staging that I need to do on the

Aby update?

This might point you in the right direction, but do it at your own risk; I haven’t tested this. I used Scrypted (running on a Raspberry Pi) for integrating my Ring Doorbell with Apple HomeKit & I

Has anyone been able to integrate Ring Doorbell into Crestron Home?

I dont think they will ever fix that. I seem to remember Dave reiterating that much to my frustration as we have quite a few PAC2/M systems out there humming away perfectly fine that occasionally need

Wearable smart devices can help monitor a person's health, track their workouts, and more.? But some people don't want a large, clunky, smart watch on their wrist while others prefer the style of a

The following files and folders have been uploaded to the Files area of the [email protected] group. * /Newline NT Series v2_archive.zip (

I've never had to deal with adding memory.? I have a older version of toolbox now.? Bouncing around but not seeing where to set up the flash card.? Where in toolbox should I see this? The only

This is what the Crestron module tries to send to port 80: GET /Monarch/syncconnect/sdk.aspx?command=GetStatus HTTP/1.1\x0D\x0AHOST:127.0.0.1\x0D\x0AAuthorization: Basic

Have several of these units that will no longer communicate with the Crestron modules supplied by Matrox (version 1). Can get into the device menus but did not find any options to specifically allow

I ran into an issue like this, could not load an updated SG iPad project onto a Pro2 with a CF card installed. It is a Toolbox issue and TB does not seem to want to fix it as the hardware is too old

Pull out the CF card and check the partitions on a PC. IIRC those older little two series had a limitation on how large the compact flash partitions could be. something makes me think it was a 2 GB

I'm loosing my mind? When I look at this pro2 with a 4GB memory card installed in system info, it says memory installed BUT it also says 4KB of 1860.1 MB used.? 4GB should show over 4,000MB

What am I looking for that might be on viewport or a older version of toolbox that isn't in the latest up to date version of toolbox?

Ran into this a while back and was stumped - thanks Eric....

Ftp.crestron.com You could probably use viewport