开云体育

I had a client with the same problem. She finally got tired of it and bought touch panels.

It is considered a completely different app

So even though it's the same apple account it will cost me another $99.99 to add the ipads? thought everything on that apple accout was covered.

Great... We're about to troubleshoot the same thing..

This seems like alot of work if you just want to monitor a LED lighting up. I wanted to do something similar at my home to know when the washing machine was done. I just bought one of these

Not using VCC means we're no longer looking for voltage but contact closure.? I think these boards using VCC are switching the negative by looking at the traces on the back side.

A little more probing tells me there is 1.94 volts at the LED's all the time and the ground or negative is switched.? These isolators are available in single, 4 and 8 channel modules. They appear to

The phone and iPad apps are different (Crestron Go tablet/iPad is likely what you have on you iPad)

I have one iphone and 3 ipads, all on the same Apple account.? I had the three ipads connected and running the same free 2 page app.? I have a little fun project trying to monitor my generator that

Will do and let you know when it is done. Appreciate the help. <crestronfreak55@...> wrote:

Tried many different hold times, remote angle, turned off lights and put the learner on a black non-glare surface. [email protected]> wrote:

I have a few clients that run on the Pyng Hub and have no logical reason to update. Plus how would it be to tell them they need to update and then have gateway disconnect issues. My understand is the

Hopefully this helps... I have found with a lot of Samsungs, that. When dealing with CEC, If you don't sent an Input Command (Even the same one you are on ), then the Power Commands don't work.

When learning that button, try tapping it instead of holding it. I'm wondering if it has a double code associated to the button. A press code and a hold code. Not common but wouldn't be the first time

can you upload the learned IR file to the files section? I have hardware and software to investigate IR commands. Best regards Crestronfreak55

Does anyone out there have the IR commands for a shaw XG15 "ignite" remote? I have never had this happen before but after learning in all of the commands, "select" simply doesn't work. I have learned

That guess would earn a Bingo, Eric! Unfortunately for Crestron dealers and service providers, it's not realistic to expect that a customer who has invested in a Pyng/Home OS2 system not so very many

My guess would be, Probably because the CP3R doesn't support OS3 or OS4

I'd be curious why you wouldn't just migrate the house from Pyng to Home on OS4 on the Cp3r and dump the pyng hub (at the only expense of a new gwexer maybe?) You'd have MUCH better UX and processing

Thanks for this, yes, I see the way the IR signals could be detected in real time and send via RS-232. The question is, as you say, can these commands be received and retransmittted at the other end