开云体育

Oh I totally agree. I wouldn’t do this for a customer. A relay with a 110vac coil wired to the power line and the contacts wired to a digital input on the processor is an easy way of sensing a power

My question is why are you using VLANs for what I *assume* is a residential install...Is there a specific use-case? And yes, I know that they have their place/uses but I think that much of the

Thanks Jay, Yeah I'll have to test that with this model. Pushing the reset is definitely only for guys like you and me in our own homes. I wouldn't want that issue with a client. I'm wondering if I

In addition to an mDNS repeater, you may also need to implement an IGMP-proxy.?? That is particular the case if you have an iPad on an different subnet then the Sonos.? I would imagine the same is

I still have an older Onkyo TX-NR575 and it works fine to control that model using the Integra DTR-80.3 IP v1.2 module.? Onkyo is (or at least used to be) the direct to consumer brand for Integra and

Hi All, I have a project coming up with this Onkyo AVR. I haven't done an Onkyo for 15 years!! It is an older unit of course so I'm curious what control media and module others would recommend for

Have used this combo a few times, volume control is a little slow but haven't heard clients complain.

How did you ensure the mDDNS packets were traversing across VLAN's? I thought that can't happen.

Hello everyone, I believe I may have come across a Sonos module within the group that communicates via IP address or device name. I'm reaching out because I'm experiencing difficulties communicating

i see lots of these 203. Notice: CIPCommandProcessor.exe # 2023-11-16 11:38:45? # AcceptSecureClient: SSL Negotiation not complete for 192.168.10.1:59861... pending. 204. Notice:

This issue was fixed on this week's database.

I think android and iOS don’t support the app running in background. So when the app comes alive, it need to resync with the control system all the data wirelessly. If Apple allows the app to run in

yes, but phone won't run 32-bit apps - see my other post about app not compatible crestron app for android is 32-bit i have asked what the state of Crestron Go (64-bit maybe) for android is, but for

we have a job from 2021, same code, reconnects quickly this job (compiled with newer libraries) is really slow this job is iOS

Thanks Brian.? I've never used CEC with NVX or DM.? Typically I hadn't found it to be as reliable and ran the risk of other devices triggering commands back thru (ie Blu-ray turning a display back

It shouldn't take nearly that long. Even on "slow" projects, I've never seen it take more than 5 or so seconds to connect. I suspect an issue with the device itself (some type of setting), the

Can't you just download the .apk file to your device and side-load the app?? That bypasses the Play store.

Good to know!! Just to clarify, My concern with P+H is not for example the recent ATV OS issue where you need two commands (Press and P+H) on the same button. My concern is when you need a repeating

is there anything i can do from a programming perspective to keep the app alive on the phone? maybe some sort of keep alive or heartbeat signal client is really unhappy with how long it takes to wake

TBH, have done quite a few of these guys and never run into a P&H issue, but it makes sense.? All the projects we have dealt with usually feed TV audio back into distribution so its always just a