开云体育

@tony golden were you ever able to get this to rowk correctly? Having the exact same issue. Need to get camera views on an Xpanel and the snapshots are unreliable.

Thanks for the update, Dave! FYI, I've been a beta-tester for Android OS, Google Maps, Waze, Android Auto, and a few others, in case Crestron wants to be added to that list... :-)

One question that was asked by the OP that hasn't been answered is "Looking for a replacement 65 inch one if anyone has a recommendation".? There are people here with much more experience than I have

Your symptoms are almost certainly reflecting an incorrect igmp snooping setup. What setup steps have you done so far? I've done a few of these now and not had any problem.

When you are looking at you the IGMP snooping, does it show the querier IP address as that switch?

The only issue I have had with ex link, is one way serial on 3 series processors.

Well I guess I'll be the sucker to try it.? Worse case, I'll switch to IR but hoping to just hang it on the wall and go with it.

I standardized on Samsung using EX-Link from ~ 2008 to 2017 and it was Bullitt proof!? (Thanks to Chip Moody for great info way back in the day!) I did an addition for an existing client with all

Pulling my hair out trying to configure this switch.? The web interface identifies it as a SG350-28 although the box shoes CBS350. I have current f/w on it and NVX devices.? Followed Crestron

Internal beta testing is currently underway. Some device-specific and OS-specific issues were identified & being worked on. Q3/Q4 is still the expected timeframe for public release.

Is that between the control system and monitor?? A 12 foot serial cable doesn't give you much to play with.? I'm using a 50 foot 1/8th stereo extension cable to run mine off a Pro2? Zero problems

I was looking at Samsung RS232 control today. Did some googling. Found nothing new. I will be installing 10 monitors next month so I hope there has been no change. I found a Samsung document about

They did add a couple of two way commands a few years ago. Other than that no changes that I know about

Anyone know if the EX-link protocol has changed recently?? My Sammy just crapped out and I really don't have the time for something else.? Hoping for a plug N play solution.? Looking for a

Yes mostly and not yet, respectively. Note in windows only as Mac version stalls at splash screen. It does, however, fully support BHOW and SDW (and TSDWE) Time Sink functions. ;) ?On 10/12/23, 7:26

Does Construct support SR lists now? Does it support Media player object yet? Thank you

No, I don't know it at all, but I'll see what I can do with it. Thanks :)

Thanks, but?I don't know S#... :( . But I'm interested, is it possible to create S# code and integrate it on an SD card to change the processor IP parameters?

Have you seen the Enterprise development kit? Its a collection of powershell modules that you can use to do a lot of things and is 3 /4 series agnostic. Typically uses SSH under the hood to connect to

With the S#?CrestronEthernetHelper?class, you can modify the ethernet parameters with just a couple of lines of code