开云体育

I have a use case where I need to do audio breakaway switching so I'm sending custom commands from an SIO into the To_device$ input. I worked with Jay at ZeeVee and these custom commands are doing

Future Automation? We have a module for that.

I need to integrate an evertz device with SNMP protocol with crestron processor Please,Would you? have a suggestion about Best Regards

Someone knows how to communicate with a device in SNMP protocol? Best regards

You might try using Samsung.local instead of Samsung.? The .local specifies using mDNS instead of NetBios.

First off, I would recommend using a VPN instead of port forwarding to access your Crestron system remotely.? Unfortunately the UDM Pro won't do OpenVPN.? But if you do? want to do port forward

I have multiple processors on my network, I'd like to resolve the ip addresses by hostname. However, for some reason if I try to point it to another crestron processor, it cannot resolve teh ip. But

*Processor:* CP4 *Network:* Ubnt Dream Machine Pro with Ubnt L2 switches. DDNS domain is registered on both MyCrestron.com and on the CP4 itself. AUTH/SSL is enabled on both the CP4 and the CrestronGo

Anyone know the console command to set a NVX device to IGMP v3?? Of course, I tried setting globally from the new DM-NVX tool, but it did not work as it did not detect what type on discovery.

Looking for the easiest/best compatible TV Lift/Elevator brand that's compatible with Crestron and Crestron Home. Thanks!

Chris, I don't know if they are related at all, but ... I have still been having issues with EISC connections between 3 and 4 series processors. That is with the 2.7000.00040 firmware installed on the

Thanks, Jonathan, Brian and All, It definitely seems like a highly intermittent issue, might even be a one-off sometimes. I'll be connecting into the site that I've had this issue with and will see if

I've seen this as well. I have a case open with TB right now for it. What I was able to narrow it down to was if you lose link on the CS side of the processor that is what breaks the TCP/IP client. I

I've seen this since the very first CP4N we installed right after they came out, and your experience sounds a lot like mine. In S+, you can leave it to stay connected and automatically reconnect and

?FTR, I almost never turn the connect off with any device and have not had any particular issues until now...“ Same here. Especially in my home/test-system, i?ve got a lot of TCP Clients in the

Hi, I have a Crestron Home system and a DMP (XR 150/500) alarm. I understand that a full integration of the DMP system into Crestron seems not possible but is there a way to just have the alarm status

Olivier, Yeah, I'm not sure why I have a '1' on it (probably some legacy thinking...) at minimum, I usually make it an actual signal, that is driven by a '1', thru a buffer, so that I can at least

I never use "1" on a TCPIP client module, I always use a connection manager to connect to the device when needed and close the connection after. This can be as short as a few milliseconds to send a

OLH: 1001189, or just search online help for Masters. September 20-22, registration opens June 15th

A big shout out to Crestron_Programmer_84 for all his help!? The problem was resolved by turning off Spanning Tree Protocol the VLAN that is used for the NVX and other things being controlled.?