It's probably either the licence or the userpageauth on the processor.
I've updated the readme with the commands.
"crestrononetpr" for the license
"userpageauth on" for the connection.
Both on the processor.

Let me know if it still doesn't work, I tested it today and it is still ok.

So for the sake of me, I finally found the culprit module.
I narrowed it down to the?GUDE Expert Power Control 8316.
I inherited the whole project from another firm and this module was not used anywhere.
Anyway, it was instanced and was connecting to an existing intelligent power socket.
I had to go through any single instanced module to finally find the offending one.

Thank you everybody for your input.

Luca

If I recall correctly, the NR's don't have an RS-232 port.? For those instances, we like to put a backup IR on the device and double up Power On with the IP module and IR just in case that pesky IP control goes down.

Hi All,
I have a project that needed to pivot to the NR1711, due to inability to get other AVRs...
I have never controlled this (or any Marantz) unit with IP control.
1. What if any issues are people seeing??
2. What Module, etc. would you recommend for this?

TIA!

Yes, I did check that for both systems

Dustin -

That seems to work but only using HTTPS but this gets me in the right direction. Thanks.

Hey Steve, thank you so much for ending my misery LOL.? I have tried everything under the sun and nothing would even start to work.? And, with CH, I have no way to watch signals to see if there is any two way comms even happening.? Not sure I like this box.? Anyway, thank you again, I will focus on building an IR interface and moving on with the project.

I'm also in a similar boat.
Crestron's projects are all in Angular. So I'm taking a couple of courses through Udemy about Angular.

So I've been trying to piece together information to make an Angular project work on a both Webpanels and a TSW1060 here on my desk.

What I've found so far:

• CH5 Zero to Button on youtube works on your local desktop browser, but uploading it to a TSW1060 did not work
• There's something that broke all Angular projects if you're using/updating the latest Angular 13.
• ?does work if you don't update the packages. This is the closest to the default angular framework I've found.

?

Have you tried to do a wifi survey and confirm the wifi channels you have assigned to the Gateways are not being used by other devices? I would also check FW on the GWEXERs. The MC3 is questionable as I've had them not work after a FW update.

I have had the same issue and have yet to resolved it.? However, I have installed the Crestron One app, enabled HTML5 in settings, and added the app to the program, this worked for me.? This at least gave me some success and the opportunity to change some HTML code.? Let me know if you get the xpanel to work, I would like to see that work as well.

I just had 2 different jobs last week where the HR remotes weren't communicating with the MC3.? This is with both MC3 gateway and EX Gateways.? All other functions worked fine.? iPad connects, Iptable / Cresnet devices work.? No indication of any issue with the processor.? Rebooting processor fixes it of course, but this results in both frustrated clients and no good answer as to the cause.

Hi,

Just wondering has anyone had an experience controlling the Philips BFL Series TV's over rs232?

The BDL commands only work via LAN control.?

All settings and clone zip have been applied also

开云体育

Hi Antonio,

I've just started adding support for a couple of new pieces of Shelly hardware to the code.? Since I'm modifying the code myself right now I'll see if I can add support for tenths of degrees.? It may take a little while so if you run into problems my changes can be your fallback.

Thanks

Jay

I was never able to get Yamaha AVRs to work with CH either. This is on systems that previously were working flawlessly for years via IP on full fat Crestron. Serial and IR work, but no go on IP. ?IIRC, the latest Yamaha models use a different protocol, so that may be what the modules are based on. ?I don’t think you are going to have any luck with these older models.?

So i have been trying to run a demo project which i downloaded from github but been unsuccessful. I have done everything as mentioned in documentation but there is no connection between my GUI and processor. I dont see any pulse in toolbox and xPanel is reported offline in IP Table. I have attached the demo project i'am trying to run. Any suggestions as to what im missing?

https://github.com/Mirage-AV/ch5-webpanel-basic

开云体育

How do you send a WOL packet? I feel like the CCD should do that when I pulse 'PowerOn', but nothing...

Do you have a Samsung contact you'd be comfortable sharing with me so I can reach out to them for the API?