开云体育

Hi,?did you find the solution?

On the other hand I'm a big fan of having my washer, dryer, and dishwasher send my wife and I notifications when they finish their cycles.? My washer and dryer also beep when done.? However, I might

I'm still at the point where I don't see the allure of most of these smart appliances. I see value in something like a refrigerator or freezer being able to tell me that the temperature has gone above

Getting washer and dryer status into the system is something I'm very interested in myself. We are moving from a house with a washer and dryer that for the past 21 years have been faithfully sending

Thanks Thyce

Thanks Kenny.? I'll take a look at Postman Jay

Hi Jay, I use Wireshark at work exclusively on remote machines. I RDP into a remote server or PC, install Wireshark, then before starting a capture I add a filter to keep the files size down. It

This would be a use for Postman. I use it for testing any http stuff.

Thanks Ken, I am sending multiple different commands to the hubitat that all work perfectly.? It is just the for suspending watering until a date that is causing issues.? So, I know that the token

Thanks Wyatt. The challenge here is that I'm almost 5000 miles away from where all the hardware is located so trying to use wireshark is a bit of an issue.? Also, all the commands the software is

I have no experience with the Hubitat or the Hydrawise, but ideally the response for an auth issue should be a 401 or 403 and not the 404 that you're seeing.? A 404 is supposed to indicate an issue

I have been messing with some HTTP stuff recently myself.? I've found the best thing is to run wireshark on the system with the browser and see what the traffic back and forth looks like.? In my

I am doing a residential and they are using Foxtel Now, the streaming service and have 2 of the dwt765fxt boxes. It looks like they are a repurposed google box. I would like to get better control of

I'm working with someone in England helping them to control their Hunter Hydrawise irrigation system that is connected to a Hubitat Elevation hub from a Crestron system.? Most of the commands being

Thanks everyone for the ideas. It looks like VMK-WIN will do what I need and be the simplest to implement, so I'll start with that.

Thanks Zac, Yes, I missed the Convert to Smart Graphics Button in VTP - After a couple tries, it actually worked pretty good I think. All the text is microscopic, so there's some work to be done

It makes far more sense to use something like EventGhost or MCEController rather than reinventing the wheel. Both of these can respond to commands via TCP from the Crestron controller and issue

You could write a server program on your machine running the xpanel that works over tcp and when you send the command it closes the xpanel.

Crestron Mobile is the old style of panel and Crestron App is smart graphics. They are not compatible. You will have to make a new panel and design it to emulate the old panel.

Is it possible this is happening when the original SGD files were kept in different directory locations?? I know I've had issues with SIMPL complaining if I move around my vtp files when I'm working