Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
- Crestron
- Messages
Search
|
File /Modules/TPLink_Switch.zip uploaded
#file-notice
[email protected] Notification
The following files have been uploaded to the Files area of the [email protected] group. By: Georges K Description: |
|
Wake on PC from Crestron CP3
#crestron
Hi All,
I found a lot of help in this group and have some built programs for wake on Lan PCs. It would be helpful if someone able to solve the WOL issue and can help me with it. |
|
Re: TSW-x52 non Crestron mac address
Sounds like it would be easier to request a fully-functioning and properly operating product from the manufacturer. Having a paper trail for things like this can help a manufacturer find production issues and make product and QC improvements. Crestron is a premium product. There's no reason one should?have to get hacky with it.?
Obviously in OP's case, he bought a used item off of eBay with no guarantees. But I can say if I ever saw one come out of the box with a botched MAC address (a non-unique one and a non-Crestron specific one), I'd send it back or ask TrueBlue to assist in correcting the issue.? |
|
Re: Using a 2-series processor for KNX module development
#crestron
Thanks for your feedback @marselle001 |
|
Re: TSW-x52 non Crestron mac address
i did that didn't worked out previously , even i swapped sd card from anther working panel , the panel did not worked .these 52 has this as common problem , if you are expert in smd soldering and desoldering you may have chance to replace the Ethernet chip looks like aluminium square ( i dont mean the RG45 ) and make shure you use pcb conditioner .
|
|
Re: Using a 2-series processor for KNX module development
#crestron
one of the advantages of series 3 over series 2 if you want to make program just for lighting , and anther program for HVAC , anther program for shutter actuator and use the EIC between them? in single processor.so you can modify one while the other still working , idea : if you are going to do that using series 3 and you have many knx application (lighting, shutter...) keep the knx handler in separate program while the other program in different program slot , so once program got modified ,in other slot , knx communication remain active send and recieve with the other slot .
|
|
Re: Using a 2-series processor for KNX module development
#crestron
series 2 will work perfectly , what i want to say , knx remain knx , since telegram remain telegram , what you can do in series 2 along with knx you can do it in series 3 unless you want to use your own s# .
|
|
Re: Nest TStat Integration
CoolAutomation use to have the CoolMasterNet interfase, but also is no longer wirking.
In the home page this is what shows: "NOTE: Google is in the process of migrating the "Works with Nest" program under the umbrella of Google Assistant, and as such is temporarily unavailable" |
|
Re: Uploading CH5
Once again, thanks Neil! :-)
toggle quoted message
Show quoted text
--- On Friday, June 26, 2020 at 4:24 PM, Neil wrote: |
|
Re: Uploading CH5
If Masters proved anything it's that Crestron's CH5 developers did not understand the level their audience are at.
I spent some time working through CH5 and have managed to get a handle on it, not using their old or new sample projects though. It would seem that if they want this to take off they are going to have to put some effort into training from the beginning or produce a VTPro like piece of software that will generate the CH5 panel files. Simpl is not going anywhere and looks like it's going to be supported well into the future. VTPro may well be another story, especially with the Flash sunset at the end of this year... There's some resources here, including some basic CH5 projects I've made that may help others get a start with it; |
|
Re: Uploading CH5
This looks to me like they just don¡¯t want to develop their own tools anymore...It's no secret, Crestron said it openly. I agree that the learning curve with these new tools is massive?but I also believe it is the right thing to do and it makes us better programmers. Also, SW and VTPro aren't going anywhere no need to panic really. |
|
Re: Uploading CH5
toggle quoted message
Show quoted text
On Jun 26, 2020, at 1:52 PM, Brian Erchenbrecher via groups.io <Brian.Erchenbrecher@...> wrote:
|
|
Crestron with Somfy UAI+
Hello everyone,
At the end of the last year I did an integration between Crestron and Somfy with a UAI+ IP interfase, and in the very begining it was working fine, with a few issues, but I was the wiring mainly. After this was fixed still working OK. Now, my client call me and is not working at all. I check and effectively the conection was lost. I've tryed to restart the conection (digital parameter in the module), restart the UAI interfase, the program and nothing. The group of modules of UAI+ are: * Somfy UAI+ v1.1 Command Processor IP * Somfy UAI+ v1.1 Endpoint Control I realized theres a new version? of the module, the v1.2, I was using the v1.1 but in the comments of the revision history said: "added new Endpoint Component (Limited). No changes to this module".... so there are no change in the comuniaction module. I was thinking to make the change from v1.1 to v1.2 but probably the issue will continue. The big question is, does any one have use this Somfy UAI+ interface via IP? and have you have experience any issue with it? or with any other issue? Thank you. |
|
Re: Uploading CH5
Lincoln, I couldn't agree more. This is one of my biggest frustrations with Crestron, both from the standpoint of having worked in education in the past and because I didn't come into programming from a computer science background. I have worked my ass off to get where I am, and now to be on the receiving end of ¡°Here¡¯s this thing that we won¡¯t teach and likely won¡¯t provide support for¡± is extraordinarily frustrating. Forgive me, everyone, if I am projecting too much onto Crestron, but for me, a lot of their instruction seems to carry the attitude of "why don't you already know this?" In any event, there's a little reassurance in the fact that others seem to be in the same boat, and also that we have a great community of programmers who tend to support each other very well when True Blue doesn't. Thank you to all of you who go out of your way to offer help and guidance.
|
|
Re: Uploading CH5
¿ªÔÆÌåÓýAnd this is precisely the biggest issue with Crestron¡¯s approach on CH5 and S#. It¡¯s not a technical problem but a philosophical one.
The competitive set is talking their adopted languages (Lua, Python, etc.) and teaching them from (literally, in most cases) ¡°Hello World¡± ¡ª acknowledging that there are hundreds of ways to do something but if you¡¯re coming in fresh
here is 1 way that definitely works in the ecosystem and if you have trouble you can get support _from us_ on it. Crestron, on the other hand is saying ¡°Here¡¯s this thing that we won¡¯t teach and likely won¡¯t provide support for¡± ¡ª which I am afraid long term
means integrators with mid-tier or lower programmers are going to swing toward the competitive set where they can get training and support.
With HTML5 this is even worse than Lua or Python because HTML5 is more a collection of concepts than a single unified entity. Saying ¡°you need to know HTML5¡± is like telling me I need to know French ¡ª there are enough nuances/dialects
(Qu¨¦b¨¦cois? Parisian? Legal? Formal? Informal?) ¡ª and the level of knowledge required is likewise not well specified (do I need to be able to speak Parisian French fluently, or do I just need to know how to ask where the bathroom is in Montreal?
I¡¯m not new to HTML or CSS (I remember reading ¡°Web Weaving¡± ¡ª in dead tree form on my middle school playground in 1995...not where CSS came in but I definitely got schooled on it reverse engineering a website that formed the basis
of my wedding RSVP site)...but I know there¡¯s a ton more that are not clearly defined dependencies. The Showcase app could be useful except it does things differently than the panel (e.g. text entry field has a blue border in the showcase app, red border ?on
the panel, nothing seems to be explicitly setting it in ether and I ran out of time trying to figure out the cypher I needed to add to the CSS before I had to move on to service real clients.
Get
? From: [email protected] on behalf of nathan@...
Crestron knows that the HTML world is large and just like programming back ends, can be done many ways to achieve the same results. Crestron is making a simpler example program because they did realize that for a lot of programmers, their first example was
overwhelming. The more you mess with it, the easier it is to understand how it works in their panels.?Sent: Friday, June 26, 2020 10:43 AM To: [email protected] Subject: Re: [crestron] Uploading CH5 ?
The only requirement to make it work on their TSW-x60 panels is having a reference or import of CrComLib, the rest is up to you on how you want to do your logic or make it work. Crestron will ONLY teach you how to use their CH5 Components, which are made for people who dont understand HTML at all in order to make development quick and easy. Their component work similiar to VTPro-E. Designed to take a signal and react on it and all the main logic for the panel is housed in the crestron processor. |
to navigate to use esc to dismiss