开云体育

Deprecated commands?? Is there a reference that you could point me to? From: <[email protected]> on behalf of Gavin <gavin.campbell@...> Reply-To: <[email protected]> Date:

I'm using the "Crestron Certified Drivers VideoServer Ethernet 1.0 (cm)". I originally tried several of the modules in the files section and found the Crestron driver to be much faster and more

Yes, the osc is to get a press and hold to keep sending the command for better scrolling. Ryan Cunningham

Thanks All for the Feedback. A couple more questions: 1. To TRoberts and rpc78? -? I'm not sure that I understand using an OSC for basic control of the NAV commands, could you explain? OR is this

I have customized the emails we get from fusion with our College header.? i have fusion monitoring my IP table to send me an email if something is offline. My question is - How do I insert a serial

Little plug... We have this: https://intrinsicdev.com/downloads/roku-module-for-crestron/ It offers direct app launching and automatically pulls in the app images too which you can do some quite nice

They are devices that respond to “switch on” and “switch off” instead of “open” or “close”. For blinds/shades first check that they work by issuing a command like “Switch <name of

I've had no real issues with my Grandstream GXV3500 to my TSW-752's but I can't for the life of me get my Lilin streams to work. -s

I think part of the problem is depreicated commands havent been removed from the module. So things like Home/Away/Goodnight do not work despite being the most obvious items you pick for a test. It's

I'm trying to execute the following http command in s# http://192.168.1.100/apps/api/37/postURL/http%3A%2F%2F192.168.1.50%3A9000?access_token=xxxxxxxx I've encoded the url within the http message as

I also use the combination of the Crestron Certified driver and the "Roku 3 Series" from the files section. I just use the files section driver for app selection. Everything else I do with the

I use a combination of the CCD, which works surprisingly well for all the basic functions, with one of the "Roku 3 Series" modules from the Group's Files section. The latter is only for the direct

That was the ticket. I had to remove the existing license and request a new one. Once that was done everything works like it should. Weird thing is that during my troubleshooting on a different

I have been using the Crestron Certified driver.? I haven't had any issues with it.? Doesn't have the direct channel call, but I have heard of people using a mix of the 2 approaches

Sharan, I would suggest you connect with your Sales Rep from Crestron. They can guide you through the feature sets. if you’ve never done Fusion before I HIGHLY suggest you go through the training

I've used that module for years, works with TCL tv's too.? I did need to edit the commands a bit to add TV functions like Input, ch and volume which work well on the TV's.? I use CEC for power

I agree with TRoberts, add an OSC to the d pad buttons for navigation Ryan Cunningham

I used: Roku 3 Series Release v1.1.zip ( /g/crestron/files/Modules/Roku%203%20Series%20Release%20v1.1.zip ) but I found I needed to add OSC to nav keys within the module, press down

Hi All, I'm looking into using IP to control the Roku platform, and for those who like it, here are some questions: 1. Which Module(s) in the files section do you recommend? Or is there another one

Agreed! I have a Ra2 site that this has happened to me 2-3 times.? I'm currently chalking it up to the dealer not yet heeding my warning about closing all port forwards...? ?Note: if you have port